Wednesday, August 10, 2022

How To Fix Drift On Ps4 Controller

Don't Miss

Replace The Analog Sticks

How To Fix Controller Drift PS4! PS4 Analog Stick Drift Easy Fix!

Someone with good knowledge and proper tools can also replace the analog sticks by themselves. However, that would require a soldering iron and other tools as well.

Unless you are an expert and have all the necessary tools to do it, I would suggest that you just buy a new controller instead. It would be much cheaper and less hectic. Not to mention, tampering with the controllers will also terminate their warranty.

Causes Of Controlled Drift

Before we jump to find out the fixes, lets learn some of the common causes of this issue.

  • One of the common causes of this issue is dirt and debris. If your controller is filled with dirt, then the chances are high that dust can enter between the gap of the analog stick and cause analog stick drift.
  • Many gamers use the PS4 controller aggressively and wonder what is causing it and how to fix drift on PS4 controller. Aggressive use can damage the potentiometer or analog stick.
  • Similar to the last one, if the controller falls accidentally, it can get damaged and cause this issue.

Solution : Reset Your Ps4 Controller

How to fix stick drift PS4? You can reset your PS4 controller. Here is how to do that:

  • log in to your working PS4 controller and navigate to the Settings.
  • Then choose Devicefrom the drop-down menu.
  • Next, select Bluetooth Devices.
  • Then you can see that all your PS4 controllers are listed here. Choose the abnormal one.
  • Then press the Optionsbutton on your controller, at the front of the touchpad.
  • In the pop-up window, choose Forget device.
  • After that, you have forgotten the malfunctioning PS4 controller. Then you can choose to turn off PS4.
  • Use a USB cable to connect the inactive PS4 controller to your PC.
  • Then turn on it and wait for it to boot up.
  • Then log in to it.
  • Also Check: How Many Bookshelves Around An Enchanting Table

    Contact Sony For Repairing Of Your Ps4 Controller

    If your PS4 controller has its guarantee interval remaining, and youve got been encountering the controller drift concern, then the most suitable choice for you is to contact Sony. They will certainly entertain your case. Either youre going to get your PS4 controller repaired, or theyll concern you a brand new one.

    What Causes Stick Drift On Your Ps4 Controller

    How to Fix Stick Drift on PS4 Controller

    The most common cause of Stick Drift on the Ps4 controller is Dust, dirt, and grime making their way into the controller and prevents the analog stick to go back to its original position. These things can add up over time, causing even severe stick drift issues on your controller.

    Another not so common issue for controller drift is Moisture. And it can mess up your electrical connections a little, causing stick drifts.

    Now, that we know what is stick drift and what is causing it. Its time to fix the stick drift of your Ps4 controller.

    Most of the time, stick drift on the Ps4 controller can be solved without opening it. But in some cases, where the stick drift is severe, we have to open the controller. Dont worry we will guide you through both cases.

    But I would highly recommend to open your controller only when nothing works.

    You May Like: Project 64 Multiple Controllers

    What If This Doesnt Work

    There are a few options you can use if this method doesnt work. The first is to take apart your PS4 controller and clean it, removing any bits of debris while youre at it. This can get a little bit fiddly, though, but if youre wanting to save yourself from buying a new controller, it might be worth a try. You can check out a handy video tutorial down below:

    If thats not something youre interested in trying for yourself, and we wouldnt blame you, it might be worth reaching out to Sony if your controller is less than 12 months old. If it is, it should technically still be within warranty, and as long as the fault isnt as a result of accidental damage, Sony should replace it for you.

    Thats all you need to know to fix the analog stick drift issue on PS4 controllers. For more tips, tricks, and guides for everything video games, be sure to search for Twinfinite.

    External Agents Such As Dust Oil And Grime

    External agents such as dust, grime, and oil are one of the top culprits behind PS4 Controller drift.

    If you leave your Controller out in the open for too long or if you eat while using your Controller without cleaning it occasionally, it is highly likely the analog stick will collect dirt on it and cause drifting on the console.

    Don’t Miss: Gta V Ps4 Install

    What Does Xbox Controller Drift Mean

    Before we move on to the solutions for fixing the controller drift issue, you must understand what Xbox One controller drift means! Making it simpler to understand, you might have noticed during your gameplay that even though you do not hold the controller, the character keeps looking upward!

    The other times, the character keeps on moving in circles while you have not pressed a single button on your controller. Although you sometimes want the character to run in a specific direction, if the controller drift exists, you will see that the character keeps running or moving in the same direction even when you have left the joystick. Pretty much annoying, right?

    The scenarios mentioned above usually happen when your Xbox One controller suffers from a drifting issue, which can cost you victories in many of your favorite games. So lets move on to the causes for why your Xbox One controller comes up with the drifting problem.

    Diys To Fix Controller Drifts

    How To Fix Controller Drift PS4! PS4 Analog Stick Drift Easy Fix!

    Most of the gamers are messy. How many of you remember eating chips and chocolates while playing? Or how many of you keep your room tidy 24*7?. These tiny dust particles get inside the sticks and repair them. This classic drift can be fixed by some simple steps:

    • Get it cleaned by professionals in any nearby electronics store.

    • Clean it yourself if you are confident in handling tech stuff. Open your ps4 and Use canned/compressed air to remove the dust particles that are stuck in there

    Recommended Reading: How Many Ps4 Games Fit On 1tb

    How To Fix The Ps5 Controller Stick Drift

    It hasnt been long since Sony released the PlayStation 5, and yet people have already started to complain about experiencing controller drift on their DualSense controllers.

    In a very recent article, an American e-commerce company iFixit has released a detailed article about PlayStation 5 controller. To many peoples surprise, it was built to last for a couple of hundred hours.

    Now that is a debate for another time. If you have recently got yourself a PlayStation 5 and already facing the drift issue, do not worry, I have got your back. You might fix the problem before getting back to Sony for repairs.

    Method 1 Reset your DualSense controller

    The PlayStation 5 is an impressive piece of hardware in all ways including, its DualSense controller. The hardware and software are extremely complex and as advanced as the tech can get. Sometimes a bug and glitch can cause issues.

    It is also possible that due to some bug, you are facing the PS5 controllers drift. It might be the fix that can resolve the issue without trying any other circumventions from this list. If you are not familiar with how you can reset the PS5 controller, please follow the steps down below:

    If you do not have a cable with you then:

    • Press the PS and buttons together for a couple of seconds.
    • Your console will detect the controller. If you have another controller, connect it with your PS5 console and register the Wireless Controller appearing under the Accessories found section.

    Thermally Isolate The Structural Joints

    Only four soldered joints stand between you and success, but these are nearly impossible to solder unless you have access to high-wattage JBC, Pace, or Hakko soldering stations.

    These are structural joints meant to securely anchor the analog stick to the PCB. This has the unfortunate side-effect of introducing the tremendous thermal mass of the metal casing housing the gimbal assembly.

    These joints act like massive heatsinks, so regular soldering irons cannot supply enough power to maintain the minimum tip temperature necessary to melt solder. This necessitates inordinately long dwell times which, in turn, increases the risk of PCB delamination and/or lifted pads.

    If the solder doesnt melt within three to four seconds, flip over the PCB and use sturdy flush cutters to sever these leads from the metal body from the opposite side. This will significantly reduce their thermal mass and make soldering easier.

    Don’t Miss: What Day Did The Ps4 Come Out

    How To Solve Xbox Controller Drift Issue

    Xbox drift issue when appeared, people didnt expect it because Xbox is one of the most reliable and strong controllers.

    But when the drift issues occurred people got frustrated, but you dont have to anymore. Because here are some of the most utilized methods you can use to fix your Xbox controller once and for all.

    Fix : Thoroughly Clean Your Dualsense Controller

    How To Fix Controller Drift PS4! PS4 Analog Stick Drift ...

    If you never clean your controllers, you really should start doing so. Think about it, when you game, your hands get sweaty. This leaves residue all over your controller. It gets in the grooves, under the shoulder triggers, under the face buttons, and just about anywhere else there is a recess.

    Unfortunately, this means dirt gets under the thumb sticks, too. This is the perfect place for grime to live, and unfortunately it can cause DualSense drift. So, you need to clean your PS5 controller.

    Related: How the PlayStation Controller Has Evolved From PS1 to PS5

    The best tools are a cotton swab and high-concentrate isopropyl alcohol. We suggest the highest concentrate alcohol you can get. The higher the concentration, the less water it contains, meaning a lower chance of water-damage to the internal circuitry.

    Don’t forget to disconnect and turn off the controller before you start cleaning it. Not doing so could damage it even further. It is simply a case of dipping the cotton swab in a little alcohol and gently cleaning each thumb stick and its housing.

    When you are cleaning it, don’t use lots of liquid. Just a light dab. Make sure you move the stick round in its chassis as well, and clean the bearing properly as this is the part of the thumb stick that will introduce dirt to the inside of the controller.

    Recommended Reading: How To Download Gta 5 Mods On Ps4

    My Ps5 Or Ps4 Controller Has Drift Issues Will Sony Repair It

    Sony offers limited repair services for the DualSense and PS4 controllers. To troubleshoot issues or request a repair, visit Sonys Fix & Replace page.

    If youve just had enough of your Nintendo Switch and want to get rid of it, read on to learn how you can reset it for resale. If your problems revolve more around battery life, find out how to get a longer battery life on your Nintendo Switch.

    Whats Needed To Repair The Ps4 Controller

    Youll need a Phillips head screwdriver with the tip size of #00 in addition to a plastic pry tool or an expired credit card to disassemble the DualShock 4 controller. A good pair of precision tweezers arent mandatory, but they will make your life easier. You might also need flush cutters while desoldering the entire analog stick assembly.

    Soldering and desoldering the components onto the controllers printed circuit board requires some form of work holding. Panavise makes great PCB vises, but you can save a lot of cash by opting for a 3D printed vise instead. You can even MacGyver some Play-Doh into a makeshift PCB-holder.

    However, we strongly recommend against cutting corners with soldering equipment. The datasheet for Alps analog stick modules recommends soldering at a maximum of 660°F for no more than three seconds per soldered joint. Overheating these components will either destroy them outright or cause them to fail prematurely.

    Related: How USB Power Delivery Chargers Work

    If you dont own a decent temperature controlled soldering station, we recommend a combination of PINECIL soldering iron and a 2.4mm chisel tip paired with a charger or power bank capable of USB PD. For an investment that will last you a lifetime, the Hakko FX-888D is a terrific soldering station for the money. Dont forget to buy a compatible chisel tip, because that tip geometry makes soldering such plated through-hole joints easier.

    Don’t Miss: How To Install Mod Menu Gta 5 Ps4

    How To Fix Controller Drift Ps4 Fast

    If your PlayStation 4 console starts acting up when playing games, you may want to look at how to fix controller drift. It is a minor problem that can cause your playing to become less enjoyable. Sometimes, though, the only way to get rid of it is to get a professional to come fix it for you. Fortunately, there are some simple things you can do on your own to try and fix it. Here is how to fix controllers drift PS4 .

    It is a minor problem that can be fixed with a few simple steps. If cleaning out the controller does not fix the issue, you should consider getting your unit repaired or replaced. First of all, if you are reading this article, you most likely have a working PlayStation 4. The problem may lie in your PlayStation Move or the hardware of the unit itself.

    Why Do Drifts Happen

    How to FIX ANALOG DRIFT in PS4 Controller! (100% Works!) (Cleaning Method)

    Games dont make people violent, but lag does! One should give importance to the pressure that is given on the analog sticks. Analog sticks are nothing but the analogous signal that we give with the help of the buttons in the joystick.

    The most common reasons for Drifts to happen are Dirt and Dust getting their way inside the stick, poor wireless connections, wear and tear, and some manufacturer errors.

    Read Also: Ds4 Dolphin

    Before You Open Up Your Ps4 Controller

    If youre going to DIY fix your PS4 controller, there are some things you want to make sure youve taken care of first. Resetting your controller can fix some of the issues you might be having, so go ahead and give that a try before doing anything else. In order to reset your PS4 controller, you will first have to go into the settings menu on your PlayStation 4. In the settings menu, click on devices, then Blutooth devices, and then find the controller you are currently using. Hit the option button on your controller and then select Forget Device. Once the controller is disconnected from your PS4, turn your PS4 off. On the controller, insert a pin into the small hole located by the left shoulder button. Press the pin in for 10 seconds. Next, attach your controller with your USB charging cord to the PS4 and boot the console up.

    If you are still experiencing problems, its time to open up the controller and do some manual labor. First, clear a well-lit workspace. There are many little parts inside the controller you will not want to lose. Also, it goes without saying, but do this at your own risk.

    Replacement Of Analog Sticks On Ps4 Controller

    Failure of the PS4 controllers cleaning and resetting methods leaves you with either replacing the analog sticks or contacting Sony. Undoubtedly, both are hectic. Replacing analog sticks will cost you a lot since you will have to buy analog sticks and the sensor of sticks by yourself. In addition, the process also requires a soldering iron.

    Overall, the process is time-consuming, hectic and also terminates the warranty of your PS4 controller. If you open up your PS4 controller and replace the analog sticks, please remember that you will not be able to claim the warranty!

    Don’t Miss: How To Get Ps Plus Refund

    Causes Of Ps4 Controller Drift

    If your character or the camera keeps moving when you’re not touching the controller, the problem’s source is likely analog stick drift. PS4 controller drift can be due to one of two things:

    • The analog stick is dirty.
    • The analog stick or the potentiometer is damaged.

    You can expect general wear-and-tear from frequent use. If cleaning the controller doesn’t fix the problem, you should look into getting your controller replaced or repaired before disassembling it.

    Remove The Battery Tray

    How To Fix Controller Drift Fast Without Tools! ( PS4/XBOX ...

    The battery tray isnt fastened down, so you can either use a plastic pry tool or your fingers to lift it off the four retention posts to expose the mainboard.

    It is now possible to desolder the components without physically separating the mainboard any further. Skip to Step 6 if you prefer to keep the mainboard assembly intact.

    You May Like: How To Link Ea Account To Xbox One 2018

    What Causes Stick Drift

    One is something as simple as low batteries. A more common cause is dust or debris inside your controller. Over time, that grime can build up and affect the electrical components. Analog stick drift can also be caused by damage to your controller, either from someone dropping it or excessive wear and tear.

    Solution : Compressed Air

    This technique works to remove debris from inside the Controller without having to disassemble it. For this, youd require a compressed air can, which translates to concentrated blasts of compressed air into the Controller to get rid of dirt and debris from inside that is causing the drift.

    So how does this work?

    This is probably one of the easiest methods where you start with a can of compressed air, targeting the bottom of the analog sticks. Make sure that your Controller is powered off.

    Spray bursts that last five to eight seconds only, and then repeat again after an interval of a few minutes in between each burst. In about 3-4 bursts, you shall have all the debris removed. Keep moving the analog stick in different directions simultaneously while blowing compressed air into the stick where it slots with the Controller. This ensures that the air hits all internal parts where there could be debris, disrupting the internal working of the Controller.

    Once youre done, dislodge the debris that surfaces before moving to another set of bursts. Make sure not to invert the can of air while spraying since that can liquefy the compressed air within. And, we all know how electric and liquid are a sinister match for any gadget .

    Now, turn on your console and your Controller to check if the drifting has been fixed.

    Don’t Miss: How To Dunk In 2k16

    Previous articleHow To Turn On Ps5
    Next articleHow Much Is Ps4 Online

    More articles

    Popular Articles