Wednesday, March 27, 2024

How To Open A Ps4 Pro

Don't Miss

How To Clean A Ps4 Without Breaking It

How to Open Your PS4 Pro Top Layer & Clean The Fan

Heres how to clean a PS4 and get it back up to speed

Its not a bad idea to learn how to clean a PS4 if you own one of these consoles.

A lot of us still have yet to take advantage of the PS5 restocks, which means we continue to play some of the best PS4 games on our trusted console. The problem is, with everyday use, dust will inevitably collect both outside and inside of the casing and this can be very tricky to remove. You cant leave it as it is though a build-up of dust will lead to your PS4 overheating, which can cause serious frustration in the middle of a game.

Cleaning the dust out of a PS4 has somewhat of a reputation for its difficulty, and for good reason. This is by no means a simple process unless you know what youre doing one wrong move and your PS4 may not run properly when you start it up again. The good news is cleaning a PS4 is straightforward with a little guidance. Here, we take you through exactly what you need to do step-by-step so you can get your PS4 running as good as new.

Conduct A Power Cycling

Power cycling is the stronger version of simply unplugging the power cable, and it can help you fix small issues with your PS4 turning on.

1. Hold down the power button until you see the power light stop flashing.

2. Remove the power cable and leave the device alone for at least 20 minutes.

3. Reconnect your system.

Remove The Hard Drive

Removing your hard drive and then trying to turn the PS4 on can help you pinpoint if your drive is the issue.

Important: Removing your hard drive may void your PS4’s warranty, so you should check that before trying this tip.

To remove the hard drive, first make sure your device is powered off and then press into the area where the LED light appears on the top of your PS4, pulling to the left side of the device to pop off the plastic covering.

Then, use a Phillips head screwdriver to remove the screw that’s marked with the PlayStation button icons it’s located in the front-left corner of the device.

Finally, use the metal handle-like protrusion at the front of the exposed area of your device to pull the hard drive out of your PS4.

Once that’s removed, try turning the device on, either as usual or in safe mode. If the problem is in your hard drive, it should power on as usual. In that case, you’d have to replace the hard drive with a new one.

Recommended Reading: How To Crossplay Minecraft Ps4 And Mobile

How To Open Your Ps4 Pro Top Layer & Clean The Fan

What screwdriver Do you need to open a PS4 pro?

The PS4 pro comes with a Phillips screwdriver.

How do you open a PS4 top?

There are two ways to open a PS4 top. The first way is to use the eject button on the front of the console. The second way is to use the power button on the front of the console and then press the eject button.

How do you open a PS4 Cuh?

If youre having trouble opening your PlayStation 4, there are a few steps you can take to get started. First, make sure that the power is on and that the system is plugged in. Then, check to see if the system is locked. If its not, press and hold down the power button until the PS4 powers off and then back on again. After that, try pressing and holding down the eject button while turning on the system.

How do you open and clean an original PS4?

There is no specific way to open and clean an original PS4, as the console is designed to be easy to use and maintain. Simply remove the disc drive and any external storage devices, then vacuum the interior of the console.

How do I take the cover off my ps4 pro?

There are a few ways to take the cover off your Playstation 4 Pro. One way is to use a Phillips head screwdriver to unscrew the six screws on the front of the console. Once the screws are removed, you can lift up the cover and remove it. Another way is to use a thin object like a credit card to wedge between the top of the console and the screen and twist until the cover pops off.

Where is the manual eject screw on PS4?

How To Clean Ps4 Detailed Steps And Pictures Are Here

Playstation 4 PRO (PS4 Pro) Glossy SKY BLUE Skin  EasySkinz

You may have noticed that the PlayStation 4 will be covered with dust after some time. If so, the device can get overheated and risky easily. Hence, cleaning PS4 is vital. But the point is how to clean PS4? Well, this article of MiniTool will tell you how to open PS4 to clean.

If you want to utilize your devices for a longer time or avoid some issues, you should maintain them regularly. Otherwise, they will out of work. For example, if dont scan your computer for virus or do regularly PC cleanup, it will be attacked by malicious files or software and run slowly.

A worse case is that your hard drive will suffer from bit rot if it is not maintained properly.

-image from playstation.com

Likewise, your PS4 should be taken good care. One of the most common maintenances is to do PS4 cleaning. If there are too much dust on the device, it will trigger a series of issues like PS4 running slow and PS4 fan loud. How to clean your PS4? You can follow the steps below to do that.

Recommended Reading: What Does A Ps4 Do

Don’t Let A Glitched Controller Mean Game Over

The Asurion Home+ protection plan offers peace of mind for all of your eligible home tech, including your favorite gaming systems, for less than $1 per day. From graphical glitches to faulty drives, we cover your video game console and original controller from the unexpected breakdownâno matter where or when you purchased it. Learn more at asurion.com/homeplus.

*The Asurion® trademarks and logos are the property of Asurion, LLC. All rights reserved. All other trademarks are the property of their respective owners. Asurion is not affiliated with, sponsored by, or endorsed by any of the respective owners of the other trademarks appearing herein.*

The devices we love arenât cheap. Protect them with Asurion Home+.

Weâll cover all your favorite home tech for less than $1 per day. No receipts or registration forms required.

Remove The Power Supply

You’re nearly there! Now you just need to remove the power supply unit so you can gain access to the heat sink and perform the most thorough cleaning. There are five screws holding the PSU in place. Three of them use the same TR9 security screws as the back cover, and the other two are standard Phillips head screws.

With the PSU on the side closest to you and the fan in the upper-right corner, the two Phillips head screws are at the corners of the system, to the far left and far right of the PSU. Use your TR9 screwdriver to remove the other three screws.

Note that if you’re using the slightly revamped model of the original PS4, you’ll see one screw in a different location here. The TR9 screw in the upper-left of the below photo will be a few inches above the TR9 screw at the bottom instead.

The Phillips screws are longer than the others and are a bit tougher to remove, so you may need to slide your knife or another thin object under the clips to pull them up. Take care to not bend the clips when doing this.

Now you can remove the PSU. There’s a cable connecting it to the motherboard underneath, which you don’t need to remove and don’t want to accidentally unplug. Carefully grab the PSU by both sides and lift it up evenly. It may take a bit of wiggling to come free.

Once you’ve got it lifted up, gently “flip” it over the left side so it rests carefully, while staying plugged in.

Read Also: How To Cancel Playstation Plus And Get Refund

Perform A Ps4 Database Rebuild

Now you can put your PS4 back in its usual spot and plug all the cables back in.

One last step isn’t strictly necessary, but since you’ve just cleaned out your PS4’s hardware, it’s a good time to optimize its software performance too.

The PS4 includes a utility called Rebuild Database that optimizes all the data on your drive, similar to defragmenting your computer. If you’ve had your PS4 long enough to build up significant dust, chances are it could benefit from this operation too.

To access it, shut down your PS4 . Once it’s off, press and hold the Power button on the front of the console . You’ll hear one beep right away continue holding it until you hear a second beep. This boots the PS4 into Safe Mode.

Connect your controller to the PS4 with a micro-USB cable, then press the PlayStation button to sync it. Select the Rebuild Database option and confirm the operation. Your PS4 will then perform the process.

The system says this could take some time depending on how much data you have. However, in our case, it didn’t take more than 15 minutes or so with nearly 2TB of data on the hard drive. Once it completes, you’ll be back at your home screen.

Once you’ve done this, you should hopefully notice your PS4 runs a bit smoother in the menus. It’s not a bad idea to perform this operation regularly to keep your PS4 performance optimal.

How To Open Ps4 To Clean Fan

PlayStation 4 Pro Teardown | PS4 Pro

Before you learn how to clean PS4 fans, you need to open up your PlayStation to access the fans. Well show you how.

But remember that following these steps will void the warranty since youve disassembled your device. So only do this if youre okay with that knowledge.

  • Time: 15 minutes
  • Knife or flathead screwdriver

Also Check: How To Find Someones Ip Address On Ps4

Problem: Loud Fan Noise

As games like The Last of Us Part II and Ghost of Tsushima demonstrate, the PS4 is on its last leg. The fans inside a properly-functioning PS4 are pinned with these late-generation titles, but if youre experiencing excessive fan noise with less demanding ones, theres a problem somewhere. If youre not getting a red blinking light, your PS4, thankfully, isnt overheating. That doesnt mean the fans are running optimally, though.

What You Should Prepare For Cleaning Ps4

To conduct the PS4 cleaning job, you should make some preparations. First and foremost, you should back up your important data on the machine before cleaning PS4. In fact, cleaning the inside of PS4 is rather risky. By doing so, you can prevent data loss due to accident.

Besides, you should prepare some professional and vital tools for cleaning PS4. They are listed as follows.

  • A can of compressed air

Top recommendation: Are You Bothered by PS4 Froze Issue? Here Are 8 Solutions

Recommended Reading: How To Restore Ps4 To Factory Settings

Reassembling The Ps4 Slim

  • 1Place the metal plate used to cover the fan and heatsink back into its proper spot. Screw back in the screws.
  • This will be the most tedious part of the process, as it can be difficult to screw back in the screws due to their size.
  • 2Firmly push down on the battery pack so it is fully locked back in place. Proceed to screw in the screws.
  • 3Put the reflective metal plate on top of the battery pack in its original spot. Once again, screw back in the screws.
  • 4Slide and snap the top cover back into place.
  • How To Clean A Ps4

    OPEN BOX!!! Sony PlayStation 4 Pro 1TB Black Game Console

    Phillips screwdriver

    A cotton swab

    Before we take you through the steps, its worth flagging that as soon as you start dismantling your PS4 to clean the interior, you will void the warranty. So, if your PS4 is overheating within the warranty period , contact customer service rather than cleaning it yourself.

    You also need to be aware that the steps are different depending on whether you have an original PS4, a PS4 Slim or a PS4 Pro. And to further complicate matters, theres a second version of the original PS4 that was made after September 2015 and which is slightly different again. The photos here are for the first original model, but weve indicated where the steps differ for the others.

    1. First, make sure that your PS4 is switched off and all cables are disconnected from the consoles body.

    2. Next, you want to clean the outside of your PS4. To do this, take your can of compressed air and spay bursts of air into each of the ports, front and back, as well as the vents. Make sure you keep the can upright as you spray and keep your distance so you dont spray moisture into the PS4. If you dont own a can of compressed air, we recommend Falcon Dust, Off Compressed Gas ).

    3. Next, run a dry microfiber cloth along the surfaces of your PS4 to get rid of obvious dust. While you have this cloth to hand, wipe the surface and around the area where your PS4 sits as well. This clears away any potential dust your PS4 may collect once back in place.

    Don’t Miss: When Will The Ps5 Be Available Again

    How To Deep Clean Your Ps4

    Now that you know how to take both preventative measures and lightly clean your PS4, its time to look into deep cleaning. Youll know its time to clean the inside of your PS4 when it starts to make more noise than usual during gaming sessions. The reason for this is because the fan and/or heat sink is no longer able to cool the internals, so the system ramps up the fan speed in order to compensate. When your PS4 starts to sound like a jet engine youll know its time to open up the system and perform a deep clean.

    Now Your Ps4 Is All Clean

    After walking through the above, you’ve opened and cleaned your PS4 fully. You should notice it running much more quietly than it was before, especially if you’ve had the system for years. While you could clean even deeper into the system, doing so would require some potentially risky operations. It’s better to avoid damaging your system and stick to this basic cleaning.

    For future maintenance, take a brush, some compressed air, or a cotton swab along the outside edges of your system to remove the dust once in a while. This should help prevent dust from building up inside, so you don’t have to go through this process as often.

    Some people have recommended placing plastic bottle caps or similar small objects under the four corners of your console. This lifts it off the below surface and should help with airflow. Aside from this, make sure your PS4 has room to breathe . Paired with the above cleaning process when needed, your PS4 should stay cool and quiet.

    Meanwhile, you can look forward to enjoying PS4 games on PS5 when you get the newer console, thanks to its backward compatibility.

    You May Like: How Do I Delete An Account On Ps4

    Solution : Taking Out The Disk Manually

    Another remedy which worked for several people was ejecting the disk manually from the console since it cannot turn on. The PS4 Pro has a spring-like structure in its disk which allows you to manually eject the disk easily by just a press of a button. Make sure that you have unplugged the console from its socket for your safety.

  • Turn the PS4 Pro upside down and look for a hole directly above the PS4 Logo. In the picture below, the PS4 logo is shown below as the image is inverted.
  • Now insert a screwdriver into the eject hole and turn it so the disk is released.
  • After the disk has been released, plug all the cables back in and try turning on the PS4 again. Check if our issue is solved.
  • Problems Sony Playstation Console Used Dirty

    PS4 Pro Teardown – Detailed Disassembly

    If you notice that the PS4 fan is spinning too fast, even if you’re not playing games, the console is most likely dirty. Does the PlayStation 4 make too much noise?

    I recommend cleaning the Sony Playstation console even if you bought it new, but it’s been a while. There is no precise deadline. You can think about cleaning it every two years, or you can consider cleaning it only when you notice that the fan is spinning too fast.

    Reading these three articles, you will realize if you are able to disassemble the Sony Playstation 4 Pro without combining mess. Then you also have to reassemble it! For this reason I advise you, if you do not have a good dexterity, to contact a professional.

    The necessary tools are quite common, reading these articles, you will realize it.

    Recommended Reading: How To Crouch In Fortnite Ps4

    Shut Down Your Ps4 And Unplug Everything

    Before you start cleaning your PS4, make sure the console is turned off. It should have no lights on the top if you see an orange light, then it’s in Rest Mode and you’ll need to shut it down fully.

    To fully shut down, turn your PS4 on, then press and hold the PlayStation button on your controller to open the Quick Menu. Head to Power > Turn Off PS4. Wait until all lights on your PS4 turn off, then unplug the power cable, HDMI cord, and anything else connected to it .

    Bring your PS4 to a place where you have some room to work. Since you’ll be removing small screws, you should have a safe place to set them.

    Like when building a PC, you should take care not to build up static electricity. Don’t work on a static-prone surface, such as a shaggy carpet, and try to only touch the plastic components when cleaning.

    More articles

    Popular Articles