Saturday, March 23, 2024

How To Replace Hdmi Port On Ps4

Don't Miss

Desoldering The Ps4 Hdmi Port

PS4 HDMI Port Replacement | Guide
  • First, apply flux to the large pins as it will help in desoldering the HDMI port.
  • Now, take out as much solder as you can from one pin using a desoldering pump and a soldering iron. Do the same with the remaining pins on the HDMI port.
  • Turn over the board and apply flux to the smaller pins on the HDMI port.
  • Now, take a hot air gun and move the nozzle in a circular motion to melt the solder on the pins. Dont overheat a single point on the board to avoid thermal stress.
  • Once the PCB is hot enough, the remaining solder on the pins will melt, and you can gently push the HDMI port out using a pair of tweezers.
  • Now, use a cotton swab dipped in isopropyl alcohol to clean the solder pads and the board. Ensure no flux residue is left before installing a new HDMI port.
  • Flip over the board and clean the solder pads using your soldering iron, flux, and solder wick.
  • Wipe out the flux residue from the solder pads and the board.
  • Dont Miss: How To Fix Pilot Light On Gas Oven

    Can The Hdmi Port Ps4 Issue Be Fixed At Home

    The first thing to do, is to make sure the issue is with the port, rather than the cable. So well assume that youve tested the cable with a different device, and found it works perfectly. Some telltale signs to indicate a problem with the HDMI port are as follows:

    • The most obvious sign is if any of the pins are bent or snapped.
    • If the port looks like it is off centre, or is sitting deeper than it should.
    • Youve turned on your PS4, but the TV is saying no signal.
    • Your PS4 switches on and the white light is visible, but there is no picture on the TV. This is known as the White Light of Death.

    If youre experiencing any of these issues, and youve double checked that everything else is working as it should, theres a good chance your HDMI port is at fault. But can you fix the HDMI port at home?

    The answer depends on how confident you are in your repair skills. You would need to be competent at soldering, as the HDMI port is soldered onto the motherboard. This would be beyond most peoples capabilities, without risking serious damage to the rest of the internal components.

    Read Also: How To Fix Thyroid Issues

    Can You Fix It Yourself

    Replacing the HDMI port is challenging, but doable if you have access to the right equipment and have confidence in your soldering skills. Fixing the HDMI controller chip is a lot more challenging however. I dont recommend a DIY repair unless you either know what you are doing, or if you see this as a learning experience and dont mind damaging the console further.

    Without proper experience or equipment, it is possible to not only incorrectly repair the HDMI port or controller chip, but also to do even more damage to the console. For example, damaging traces or pads on the printed circuit board.

    Damage to the PCB is not something that can easily be repaired and must be done by a qualified repair shop.

    Read Also: How Much Are Playstation Vr

    How To Play A Ps4 With A Broken Hdmi Port

    This article was co-authored by wikiHow staff writer, Travis Boylls. Travis Boylls is a Technology Writer and Editor for wikiHow. Travis has experience writing technology-related articles, providing software customer service, and in graphic design. He specializes in Windows, macOS, Android, iOS, and Linux platforms. He studied graphic design at Pikes Peak Community College. This article has been viewed 14,013 times.Learn more…

    Although a broken HDMI port on your PlayStation 4 will prevent you from playing games on your TV, you can still play PS4 games with the PS Remote Play mobile app. For this to work, you’ll need your PlayStation Network account login and your PS4 will need to be connected to the same wireless network as your computer or mobile device. This wikiHow article will show you how to play your PS4 even when your HDMI port isn’t working.

    What Causes The Ps4 Hdmi Port Fault

    #ps4 hdmi port replacement is not that easy and cannot be done by just ...

    The most common reason we hear is that the PS4 has been dropped or knocked while plugged in. This causes the HDMI cable to yank out and physically damage the port. It can also happen while plugging in the cable. The ports are quite delicate so if the HDMI cable isn’t plugged in carefully to the PS4 it can cause damage.

    If the port doesn’t look damaged, there is another part of the motherboard that could have failed.

    You May Like: How Much Is Fifa 20 On Ps4

    Ps4 Faulty Hdmi Port Symptoms

    • If your PS4 turns on and the white light comes on but there is no picture on the TV also known as the White Light of Death
    • Bent or broken pins inside the HDMI port
    • The TV might say no signal or something similar with the console hooked up via the HDMI cable
    • A crooked port or one that looks like its been pushed in further than it should be

    What Causes The Ps4s Hdmi Port To Break

    The main thing that causes the Playstation 4s HDMI port issues is that the port itself is too weak. This is due to poor design by Sony, and it causes the port to wear out fast and get damaged easily. This is especially the case for first-generation PS4s.

    There are a couple of things that can cause the weak HDMI port to break:

    • Frequent plugging and unplugging of the HDMI cable. This causes the port to wear out over time.
    • Pushing the cable in hard and/or at an angle. Due to the design of the port, this can move, bend or break the small pins inside of the HDMI port.
    • A sudden force pulling on the cable, such as someone/something pulling the cable or the PS4 falling over while plugged in. Aside from damaging the HDMI port, this can also cause the port to shear off the circuit board completely.

    As you can see, there are a lot of ways the HDMI port can cause issues. To make things worse, the HDMI controller chip on the motherboard can cause problems as well.

    Also Check: How To Hook Up A Ps4 To A Laptop

    How To Fix A Broken Hdmi Port On Ps4 Slim

    If youre unfortunate enough to have a broken HDMI port on your PS4 Slim, dont despair its not as challenging to fix as you might think. The first thing you need to do is purchase a replacement HDMI port. You can find these online or at your local electronics store. Once you have the replacement part, simply follow these instructions:

    1. Power down your PS4 Slim and unplug all cables from the back of the console.

    2. Using a small Phillips head screwdriver, remove the four screws that secure the hard drive bay cover on the back of the console. Remove the cover and set it aside.

    3. Locate the HDMI port on the main board inside the console . Using a soldering iron, carefully melt each of the four solder points holding the port. Be careful not to overheat the surrounding area or damage any other components on the board!

    4. Gently wiggle/pull out the old HDMI port from its socket on the board and replace it with your new one, being careful not to touch any of the other sensitive components nearby.

    5. Carefully solder each of four corners of

    Signs Of Ps4 Hdmi Port Damage

    PS4 HDMI Port Repair – White Light of Death Fix – No Signal

    Through the PS4 HDMI port, you can connect the console to your television. The sound and picture are also transmitted through this port. Majority of modern gaming consoles already have this cable as it is capable of rendering the highest definition video signals and surround sound.

    Other indicators of PS4 HDMI Port problems are the following:

    • no video signal
    • faulty light indicator on the console

    Specific signs of hardware damage on the PS4 HDMI port are as follows:

    • Bent Pins this is a prevalent issue among PS4 owners. Its often the result of frequent plugging of the HDMI cable in and out, aggressively.
    • HDMI pins pushed in on the console this usually happens if the cable is forcibly plugged into the HDMI port.
    • Loose HDMI port this is when the cable wobbles when plugged in to the port due to some missing HDMI pins.

    If you notice any of the aforementioned symptoms, you can perform the basic troubleshooting on your end by checking the HDMI port for any indications of physical or liquid damage.

    You can find the HDMI port on the upper center at the back of your PS4. It usually looks like a half of an octagon. If you see any signs of cut or slash, then that could be the underlying cause.

    Recommended Reading: Is Gta Cross Platform Ps4 And Xbox

    A Summary Of The Ps4 Hdmi Port Repair Process

  • Remove the plastic covers of the Playstation 4.
  • Unscrew the screws that hold the power supply.
  • Unplug the cable that connects to the power supply.
  • Remove the power supply.
  • Unplug the cables that were located under the power supply and unscrew the black screw next to it.
  • Remove the hard drive tray.
  • Unscrew and remove the large shielding plate.
  • Unplug the small connector on the edge of the motherboard.
  • Unscrew and remove the heatsink clamp.
  • Take the motherboard out of the PS4.
  • Desolder the broken HDMI port.
  • Replacing The Hdmi Port Yourself

    Its challenging to replace the HDMI port yourself, but its entirely doable as long as you have the right equipment and decent soldering skills. However, repairing the HDMI controller chip is a completely different matter and is not something you should attempt yourself.

    Without proper equipment and experience, youll likely not only incorrectly replace the HDMI controller chip or port, but also do more damage to your PS4.

    Make sure you always go to a qualified repair shop for a damaged printed circuit board , so you dont have to worry about damaging the pads or traces on the consoles circuit board.

    Don’t Miss: How To Get Emails From Playstation

    How To Avoid Excessive Fees For Your Hdmi Port Repair

    When you are taking your PlayStation 4 to be repaired, there are several things you need to consider.

    • Make sure the price they give you is for labor and parts.
    • Be aware that they may charge you much more for a piece than it costs them.
    • Ensure they know to only fix specifically what you want. Otherwise, they might fix other things and then charge you.

    It is always a good idea to get quotes from multiple places. This can help you see where one place might be ripping you off. DoNotPay can help you find the lowest-priced repair for your PS4 HDMI port.

    Use A Different Hdmi Cable

    Playstation 4 Pro PS4 HDMI Port socket repair Bolton manchester UK

    The most common reason behind a PS4/HDMI cable issue is a faulty HDMI cable. Its better to try using a different HDMI cable, ideally one thats connected to another device on the same TV, to identify the issue.

    If you think the cable is damaged or defective, you can easily fix the problem by switching to a new, functional High-Speed HDMI Cable .

    Don’t Miss: How Long Does A Ps4 Controller Last

    How To Replace A Broken Hdmi Port On Ps4 Slim

    If youre lucky enough to own a PlayStation 4 Slim, you may have noticed that its a bit more delicate than the original model. A broken HDMI port is one of the most common issues with the PS4 Slim.

    This can be caused by anything from using an incompatible HDMI cable to simply jostling the console too much. If your PS4 Slims HDMI port is damaged, dont despair there are ways to repair it!

    The first step is to find a reputable Playstation repair shop in your area. Many stores that sell video games also offer repairs, so this should be easy to do. Once youve found a store, take your PS4 Slim and explain the problem. The staff should be able to give you a quote for the cost of the repair.

    In most cases, replacing the HDMI port on a PS4 Slim will cost between $60 and $80. However, if youre not comfortable paying for professional repairs, some DIY options are available. With time and patience, you can replace the HDMI port on your own!

    There are several tutorials available online that show how to replace the HDMI port on a PS4 Slim. These can be helpful if youre not sure what tools you need or how to disassemble your console.

    Just remember if you attempt repairs on your own, theres always a risk that you could make things worse. So weigh your options carefully before deciding whether or not to tackle this project yourself!

    Playstation 4 Blue Line Of Death Troubleshooting

    The infamous Blue Line of Death is a widespread problem among PlayStation 4 gaming consoles. If you see a continuously pulsing blue light on your console, your device may be plagued with any number of software or hardware issues. Some of the most common causes of this issue include damaged HDMI ports, hard drives, and power supplies. To troubleshoot this issue, bring your device to CPR Cell Phone Repair. Our technicians can assess the problem, and offer you a time and cost estimate.

    At CPR, we take our work very seriously. In addition to a reliable console repair solutions for PlayStations, Nintendos, and Xboxes, we also provide our customers with a limited lifetime warranty on replacement parts and workmanship.

    When you need a PlayStation console repair, CPR is the right choice. Bring your PlayStation 4 to any CPR store, or mail it to us today.

    Read Also: How To Delete Skyrim Saves Ps4

    Installing A New Ps4 Hdmi Port

  • After cleaning the board, you can install a new HDMI port. The smaller pins should line up with the solder pads and perfectly fit right into the larger pins.
  • Now, solder the smaller pins first. Keep in mind its a little tricky, so you will need a magnification tool to see clearly and align them with your HDMI port.
  • Turn over the board and apply some flux to your HDMI ports large pins before soldering.
  • Once done, clean the area using a cotton swab damped in alcohol.
  • How Much Will It Cost

    PS4 How to FIX the HDMI Port (No tools) NEW!

    When youre in need of PlayStation 4 repair services that wont break the bank, depend on the professionals at CPR! While repair costs vary based on the type and extent of damage to your PlayStation 4, our repairs are always budget-friendly. For a free estimate on your PlayStation 4 repair, call your local Cell Phone Repair store!

    You May Like: How Much Is Destiny For Ps4

    Desoldering The Hdmi Port

    In this PS4, the shield that covers the HDMI controller chip seems to be heavily corroded.The first step in desoldering the HDMI port is to apply flux to the large pins.desoldering processUse a soldering iron and a desoldering pump to remove as much solder as possible from one of the pins.Engineer SS-02 solder suckerIdeally, the pin would be floating and not connected to the PCB with any solder at all.

    Repeat the steps from above for the other 3 large pins of the HDMI connector.

    Flip the board over and apply flux to the HDMI port pins on the other side of the PCB.Use a hot air gun to melt the solder on the pins.Once the area is hot enough, the solder on the pins will have molten and you can remove the HDMI port.gentlythrough holesWhen the HDMI port is loose, you can use a pair of tweezers to remove it. Use a cotton swab with isopropyl alcohol to remove the leftover flux residue.Clean the solder pads on the other side of the board with solder wick, flux and your soldering iron.Wipe the flux residue from the board and solder pads.

    Select Your Model Playstation To Book A Hdmi Port Replacement

    PS4 HDMI Port Replacement PS5 HDMI Port Replacement

    When the HDMI port is broken, the port connector will be very lose, the pins may be damaged in the port and there will be no display on the TV/Monitor. You will still the PlayStation lights turn on and turn Blue. Before you book this repair be sure to check it using a different HDMI cable first to rule out a faulty cable. The HDMI Normally gets broken when the PlayStation is been moved with the HDMI cable plugged in to the game console.

    If the port is not loose and the connection seems fine. The PlayStation lights up but stays on white then this is not the HDMI port at fault so dont book this repair for this issue as we dont repair a faulty video chip.

    Recommended Reading: How Much Is Playstation Now Subscription Uk

    Why Is My Hdmi Port Not Working

    If your HDMI connection is still not working, its likely there are hardware issues with your HDMI port, cable or your devices. This will resolve any problems you might be experiencing due to your cable. If changing the cable doesnt work for you, try your HDMI connection with another TV or monitor or another computer.

    Why Does The Ps4 Hdmi Port Break

    Sony PlayStation 4 PS4 HDMI Port Replacement Repair Service

    A common indication that an HDMI issue is present on your PS4 is when its unable to connect or render the correct display.

    Wear and tear is also another factor to consider. This is usually the case if youre constantly hauling the cord out of it. The same thing can happen if youre too gruffly when inserting the cord.

    Environmental factors such as dust and dirt that accumulate and get stuck inside of the port are likewise among the possible causes.

    Don’t Miss: Why Won’t My Ps4 Controller Charge

    More articles

    Popular Articles

    How To Dunk On 2k20 Ps4