Page : Ps3 Parental Controls How
Page 3: The Dirt On Blu
Remove The Back Stickers And Screws
Now that you’ve got your PS4 ready to work, turn it around so the back is facing you, then flip it upside-down. You’ll see three stickers along the “top” that you must remove.
Note that if you have the slightly revised model of the original PS4, you’ll only see one sticker and screw here in the middle.
The middle one has a special warranty sticker that damages itself when you remove it. The other two are a bit thicker and might require a bit of extra work to peel off. Use your knife or another pointed tool to peel back a corner of the stickers, then they should come off easily. Be careful not to scratch your system while you remove them.
Set them aside if you want to re-apply the stickers later, or throw them out if you don’t care. Once you’ve removed the stickers, use your TR9 screwdriver to remove the screws underneath. They’re short, so they shouldn’t require much effort. Take care not to strip them, and set them aside in a safe place.
Read Also: How To Take Off Family Manager On Ps4
Removing The Internal Components:
- Remove the Disc Drive remove two ribbon cables and a small connector cable.
- Remove the Card Reader remove the two screws holding this down.
- Remove the Wi-Fi Board remove the antenna cable, four screws and the ribbon cable.
- Remove the Power Supply remove five regular screws, and the ground screw. Then unplug the two connectors
- Remove the Antenna there is only one small screw for this.
- Remove the Eject Board this is the small board just in front of the disc-drive. Remove the four screws holding this down.
- Take the Hard Drive Out remove the black plastic door, and remove one screw with your small Philips screwdriver.
Keep in mind the above-mentioned items use smaller screws this will help when you put the console back together.
Page : Ps3 Hdd Replacement Mini
You May Like: How To Connect Ps4 Controller To Pc Via Bluetooth
Page : Emulate Winxp In Ps3 Under Linux
Page : How To Change From ‘nat Type 3’ To ‘nat Type 2
Don’t Miss: Can I Use Ps4 Controller On Ps3
This Video Shows How To Disassemble Playstation 3 Game Console
All necessary steps presented here in this video guide. From this video you will learn how to replace the broken HDD to the new one, fan cleaning, replace the Optical Disc Drive and etc.
Disclaimer:
This information is provided for informational purposes only. We accept no liability for damage caused to your device while following the video instructions. Also note that if your laptop or any other device is still under warranty period, then in the process of dismantling the guarantee may be canceled because traces remain after disassembly and it violates the terms of the warranty period. Before disassembling, make sure that the warranty on your laptop has been over.
What Causes The Red Light Of Death On Ps3
PS3 blinking red light error can keep you from playing your favorite games, which is rather annoying for gamers. What does blink red light mean on PS3? Actually, PS3 red light of death implies that there is a heavy workload on the console at that very moment. It is a warning before the actual error.
Tip:
The blinking red light on PS3 might appear when you are playing graphics-intensive games. In fact, many factors can sparkle the PS3 red blinking light error. According to an investigation, hard drive failure and console overheating are the main causes for the error.
Now, you can try resolving the PS3 red light of death error with the following fixes.
Recommended Reading: Does Playstation 3 Play Playstation 1 Games
How To Clean The Ps4 Slim And Ps4 Pro
To clean the fan on the PS4 Slim, you don’t need to remove the warranty sticker. It’s much easier to remove the cover, too. All you have to do is pull up on the left and right corners on the front of your system. Pull on the middle, then slide the cover back and it will come right off.
From here, you’ll be able to see the fan even though it’s obstructed by a cover. If your fan doesn’t look too dirty , you can spray some canned air into it and probably call it a day. Remember to use a cotton swab to prevent the fan from spinning.
For full cleaning, you’ll need to remove several screws from the cover and the power supply plate. Since we focused on the original PS4 here, please see the video below for PS4 Slim-specific instructions.
The PS4 Pro is similar, but it’s even simpler. Simply pull up on the front left and right corners to loosen the cover, then slide it back. You can see the fan as soon as you remove this, making basic cleaning quite easy.
Unfortunately, the heat sink is buried deep in the PS4 Pro, and accessing it requires disassembling almost the entire console. Thus, you should stick to just cleaning the fan if you have a PS4 Pro. Check the below video for more details.
How Do I Clean My Self Clean Ps3
0:001:30How to do Sony PS3 self clean – YouTubeYouTubeInício do clipe sugeridoFinal do clipe sugeridoTurn this one on or plug in the PlayStation. If it’s the newer one. You’ll hear the fan. Come on atMoreTurn this one on or plug in the PlayStation. If it’s the newer one. You’ll hear the fan. Come on at a much higher speed. Right so you can hear it blowing out all the. Dust. It runs for a little.
Recommended Reading: Ps4 How To Share Play
Page : Make A Lag Switch
Page : Ps3 Swap To Play Ps2 And Psx Games
You May Like: How To Get Money In Gta 5 Online Ps4
Fix : Troubleshoot Your Hardware
If the PS3 red blinking light error still persists after trying the above fixes, its time to check your hardware. They probably are the root causes for the error. Hardware like hard drive, fan, and disc drive can goes wrong easily.
As hard drive issue has been illustrated in the above content, we focus on fan issue and disc drive here. You can check if the fan is working properly by listening to its sound. Alternatively, hold you hand near the vents to feel if there is any air blown out. If the fan doesnt work properly, you need to replace it with a new one.
How to check if a disc drive is faulty? A simple method is to play a game not requiring disc drive. Download a free game from the PlayStation store and let it run for a while. If the console doesnt shut down, your disc drive probably is faulty. If so, you should change a new disc drive.
How Do You Clean A Playstation 3
9:5212:46HOW TO: TAKE APART/CLEAN DIRTY PS3! – YouTubeYouTubeInício do clipe sugeridoFinal do clipe sugeridoYou most likely have a broom in your house there’s guaranteed you most likely have one also you useMoreYou most likely have a broom in your house there’s guaranteed you most likely have one also you use can of air you can use a leaf blower I bring this thing in your backyard.
You May Like: How To Fix Ps4 Controller Analog Stick
Is Ps3 Self Clean Safe
However it doesn’t hurt to do a self clean every week or two. That’s actually a stress-test mode for the fan, NOT a cleaning mode. All it does it run the fan at it’s max speed, and if you do it more than once it may damage your console in the long term. It’s recommended to take apart your PS3 instead.
How Often Should I Clean My Playstation 3
- Hit the button and watch the dust bunnies fly. This will not completely clean the system. Stubborn dirt/dust will remain on the motherboard, heat sink etc. Preform this test every 1-2 months to ensure longevity of your device. Dirt and dust build up is one of the top killers of video game systems.
Read Also: How To Reload In The Last Of Us Ps4
What You’ll Need For Cleaning A Ps4
PS4 cleaning is a relatively simply job, but does require a few materials:
- A TR9 Torx security bit screwdriver. The PS4 uses TR9 security screws. A TR8 screwdriver may work, but you should use a TR9 for best results. Make sure you get a screwdriver with a security bit, which has a tiny hole in the center.
- If you don’t have this already, consider the TECKMAN PS4 cleaning repair toolkit, which has the right screwdriver plus a few more handy tools. If you already have a Torx set or computer opening toolkit, it likely has the bit you need.
For a more efficient cleaning, you may also want to use these optional materials:
Note that if you have an original model PS4, opening your console and cleaning it will void your warranty . However, you can remove the cover from the PS4 Slim and PS4 Pro models without voiding the warranty. Chances are that if you’ve had your PS4 for long enough that dust buildup is an issue, your warranty has probably expired anyway.
We’ll show steps for cleaning the original PS4 in this guide . At the end, we’ll mention the differences for the other models.