Friday, July 19, 2024

How To Take Ps4 Off Safe Mode

Don't Miss

How To Fix Ps4 Safe Mode Loop Without Losing Data

How to take your ps4 off of safe mode

Troubleshooting options to fix PS4 Safe Mode loop error

Update System Software – You can download and install any new updates that are available, by which you may get rid of the Safe Mode loop if the problem resulted from outdated system software.

Restore Default Settings – It restores the PS4 to the default factory settings. After factory reset, you need to set again the time zone and a few other console settings.

Initialize PS4 – All data and settings will be lost by performing this step. It deletes all user data and restores the PS4 as if it just came out of the box. So, make sure that you backed up the PS4 data before taking the step.

Initialize PS4 – It works the same with “Initialize PS4” by which all user data will be permanently erased, afterward a reinstallation version of PS4 system software will be installed.

Dust And Clean Your Playstation 4 Console

Dust and grime buildup will cause system errors for your console if you let it get bad enough, causing stutter when you play the best PS4 games, or even keeping them from running entirely. Also, some homes are more prone to dust than others. If you notice build-up on your PS4, you may need to look into getting a dust cover. Having one will help protect your console when it’s not in use. To clean up your PlayStation 4 properly, here’s what to do.

  • Point the nozzle of the compressed air at the vents. Make sure to keep it about 1-2 inches from the vent.
  • Keep the can upright to prevent any moisture from going into your console.
  • Spray in short measured bursts.

  • Periodically look into the vents to ensure you’ve gotten all the dust.
  • Take your microfiber cloth to clean any dust or residue that may have broken loose and claimed space elsewhere on the console.
  • Use the microfiber cloth to wipe down the top, side, front, and back of your console.

  • If the microfiber cloth is dirty, change the cloth out. Do not rinse the cloth and continue to wipe while it is wet.
  • Once you’ve cleaned your PlayStation 4, follow the instructions below for updating your console and rebuilding your database. Neither of those options will affect the saved files on your PlayStation 4 and correct any issues your console is experiencing. Finally, boot up your console after you’ve completed all of those steps. If you’re still booting in safe mode, it’s time to use your last resort option.

    Safe Mode On Ps5 Consoles And Ps4 Consoles

    Learn how and when to access Safe Mode, a troubleshooting tool designed to help resolve data and display issues on PlayStation®5 consoles and PlayStation®4 consoles.

    What is Safe Mode?

    Safe Mode allows you to start your PlayStation console with only the most basic functions active. The Safe Mode options are designed to help you solve issues by rebuilding the console storage database, changing your resolution or “hard” resetting the console to its factory settings.

    Some Safe Mode options will result in the loss of data. Be sure to back up data to a USB drive or Cloud Storage before selecting these options.

    How do I start my console in Safe Mode?

  • Turn off your console by holding the power button for three seconds. The power indicator will blink for a few moments before turning off.
  • Once the console is off, press and hold the power button again. Release it after you hear the second beep one beep will sound when you first press, and another seven seconds later.
  • Connect the controller with the USB cable and press the PS button on the controller.
  • How can I update my system software using Safe Mode?

    If your console has been offline for a long period, or has lost connection to the internet during a system software update, you may need to manually update the system software. A manual update can be downloaded directly to your PlayStation console or to a USB drive. Please follow the guides below.

    Read Also: How To Turn Off Voice In Minecraft Ps4

    Solution 7 Initialize Ps4

    This option is quite similar to the Initialize PS4 method. Using this will also remove entire PS4 game data,saved pictures and also the system settings. So it will be better if you keep the proper backup of your PS4 system data on secondary storage devices before approaching this solution.

    It will also take your PS4 system to its original state but the only difference is that in this option your PS4 Firmware will also get removed.

    Solution : Check Ps4 Cables

    How to get a PS4 out of Safe Mode in 4 different ways ...

    If there is something wrong with your PS4 cables, PS4 stuck in safe mode will appear. So you need to make sure the cables are working well on PS4. To check PS4 cables, you need to:

    1. Try to connect the USB/power/HDMI cables to other ports to see if they work.

    2. Plug out the power cable for 10 or more minutes and then plug it in again.

    For some users, if you hope to get PS4 out of safe mode without USB cable, you can move on.


    Read Also: Gta 5 Mod Menu Xbox One Usb Download 2021

    Solution 5 Rebuild Database

    Using this option you can make an easy scan on your PS4 drive and then create fresh data of the entire PS4 system content.

    It is a very effective method to clean unwanted PS4 data. This will ultimately make the PS4 system performance better and you can easily get out of PS4 safe mode.

    After this, you can use this rebuild database option to fix issues like PS4 games freezing or frame rate drops.

    Note: As per the number and type of data items Rebuild Database process may take time to get over. So dont be impatient.

    Way : Restart Your Playstation 4

    The first and easy way you can try is restarting your PS4. Note that this option wont damage the data saved on the game console.

    To restart your PS4 to get it out of Safe Mode, you should complete:

    • Connecting a DS4 controller to the PS4 using a USB cable
    • Selecting Restart PS4 in the Safe Mode menu to exit.

    Read Also: How To Hook Up Ps4 Controller To Phone

    Clean & Reconnect The Cords

    If you are on this method, the chances are that the first method failed. Often safe mode occurs because of loose cables or unconnected chords. It can be the HDMI cable, power cable, and other important cables. So what this method talks about is to make sure that all the cables are connected correctly.

    HDMI Cords

    Makes sure that before reconnecting the chords, your system is turned off properly for safety purposes.

    • STEP 1. Gently unplug the HDMI cord from both TV and your PlayStation 4
    • STEP 2. Now gently clean the ports with a dry cloth, make sure to clean them out correctly
    • STEP 3. Clean both the ports of the TV and your Console
    • STEP 4. Once done, connect the Cord tightly

    Power Cord

    Once you are done with the HDMI cords, the next thing is the Power cord. Perform the same steps as you are done for HDMI cords.

    • STEP 1. Unplug the Power cord from the PS4 as well as the Socket
    • STEP 2. Clean out the port on PS4 gently with a dry cloth
    • STEP 3. Let the cord be disconnected for about 15-20 minutes
    • STEP 4. Connect the cords and try starting the PS4

    Update Your Ps4’s Software

    Cannot Start the PS4 – Safe Mode Loop – How to Fix

    Try updating your PS4’s system software from the Safe Mode menu.

    Press “X” to select elect option 3 on the menu, “Update System Software.” Then, press “X” to select “Update Using Internet.” From there, follow the instructions on the screen.

    If nothing else works, select option 7, “Initialize PS4 ,” and press “X.” Follow the instructions on the screen.

    You May Like: Can You Transfer Apex Legends Account From Ps4 To Pc

    How To Exit Safe Mode On Windows 10

    Marshall Gunnell is a writer with experience in the data storage industry. He worked at Synology, and most recently as CMO and technical staff writer at StorageReview. He’s currently an API/Software Technical Writer at LINE Corporation in Tokyo, Japan, runs ITEnterpriser, a data-storage and cybersecurity-focused online media, and plays with development, with his RAID calculator being his first public project. Read more…

    Booting Windows 10 in safe mode is a good idea if you cant start Windows 10 normally, and you need to do some troubleshooting. Heres how to get out of safe mode when youre finished and want to use your PC normally.

    How Do I Rebuild My Ps5

    How do I Rebuild the PlayStation 5 Database?

  • Turn off your console by pressing the power button. …
  • Once the system is off, press and hold the power button again.
  • Release it after you hear the second beep. …
  • Connect the controller with the USB cable.
  • Press the PlayStation button on the controller.
  • Select Rebuild Database.
  • You May Like: Veterinarian Sims 4 Cheats

    Solution 3 Update System Software

    If your PS4 undergoes lost internet connection meanwhile the firmware update or it is not updated for a long time. In such a situation, you are required to manually update the software.

    By updating your PS4 system software you can easily fix several PS4 bugs and problems.

    The PS4 Software update is also compulsory because its just impossible to proceed with the classic update procedure. But if you are already in a situation where PS4 is not working then its impossible to normally update it.

    In that case, you need to manually download the PS4 system software from Sonys official website.

    After the completion of the download process, connect your USB storage devices such as a hard drive or pen drive. Now transfer the updated file which you just downloaded.

    • On your USB device create a folder with the name PS4 and inside this make a subfolder named UPGRADE. Now copy the downloaded file into this UPGRADE subfolder.
    • After that, shift your update file within the formerly existing PS4UPDATE.PUP folder of your PS4 system.
    • Launch the PS4 console. Now from the safe mode window, you have to choose the Update system software option.

    Note: If the update fails to recognize then check whether you have kept the updated file in the right folder within the PS4 system or not.

    How Do I Fix My Ps4 System Update Error

    How to Turn ON/OFF PS4 &  Use Safe Mode Properly

    Press the PS pairing button on the DualShock 4 controller after connecting it to the console with its USB cable. Then, press the Safe Mode button twice to start the console in Safe Mode. Safe Mode can be accessed by selecting Update System Software > Update from USB Storage Device. If you want to proceed, select OK.

    Also Check: How To Play Ps3 Games On Ps4 Without Ps Now

    How To Get Ps4 Out Of Safe Mode Easily And Quickly

    Is your PS4 stuck in safe mode? Recently, it is frequently reported that users cant stop PlayStation 4 from starting up in safe mode. You just failed to exit safe mode after you try troubleshooting issues with safe mode in PS4, for instance, fixing PS4 not turning on or PS4 not connecting to the internet. It is frustrating to get stuck in PS4 safe mode.

    Therefore, you may as well follow up to consult powerful methods to get your PS4 out of safe mode, or simply, turn off safe mode on PS4. And if necessary, it is also available for you to learn more about PS4 safe mode, such as what it means and how to put PS4 in safe mode.


    What Is Ps4 Safe Mode

    PS4 safe mode are the options that your console can undertake when there might be a problem with some of its data. This happens, for example, if you have been trying to update your system and the process fails. In this situation, instead of throwing you an error message, the console will automatically restart in safe mode so that you can try again.

    Safe Mode is also used to troubleshoot your PS4 if there are any problems with its software or game files, like a corrupted update file for example. You would need to enter Safe Mode and use update system from the menu options, which would replace the corrupted file with a new one.

    You might need to enter Safe Mode in order to recover your game save data if it is not available or accessible on the system anymore, and you dont want to delete anything else off of your console just yet. This way, you could copy them onto an external storage device before erasing them or reformatting the storage device.

    But the problem here is when you find yourself in a situation that PS4 system is stuck in Safe Mode and the controller is not working, so youll want to get out of safe mode without using a controller.

    Read Also: How To Play Movies On Ps4 From Usb

    How To Stop Your Ps4 From Starting Up In Safe Mode

    Sometimes, your PS4 suffers from a random fluke and won’t stop starting in safe mode. There are several reasons why your PS4 may be stuck in safe mode. The problem often revolves around a loose cord or a console update, but other times it’s more complex. So while you’re going through this guide, make sure you test out all of those simple fixes first before you take the route of initializing your entire console. After all, while the PS5 is available, it’s still hard to get, and if you’re still actively gaming on the PS4, you’ll need to take care of it as much as possible.

    How To Launch Safe Mode


    Note: Do not attempt to launch your PS4 in safe mode if your USB ports are not working. After you start your console in safe mode, you need to sync your controller through a USB port. If your USB ports aren’t working, you will need to fix them before attempting this step.

  • Turn off your PS4.
  • Press and hold the power button until you hear two beeps: one when you first press and another seven seconds later.

  • Connect your DualShock 4 controller with the USB cable.

  • Press the PS button on the center of the controller.
  • There you have it! If your PlayStation is experiencing issues that just can’t be solved in the normal startup or isn’t booting like it used to, you can use safe mode to find more solutions.

    Any of the options below will help you get out of safe mode.

    Read Also: How To Stream On Facebook Gaming Ps4

    Check Your Hdmi Cables

    If your PS4 is starting in safe mode and you can’t navigate the menu options, it might be a hardware issue. Before you do anything, try changing out your HDMI cables.

  • Unplug your HDMI cable from both your PlayStation 4 and the back of your TV.
  • Before buying a brand new HDMI cable, try switching the ends of the cables.

  • Use the end of the HDMI cable that was plugged into your PlayStation 4 and plug it into your TV.
  • Use the end of the HDMI cable the was plugged into your TV and plug it into your PlayStation 4.
  • Another PlayStation user suffered this terrible fate and found that changing his HDMI cables allowed him to navigate the menu, use the “Restart PS4” option, and get back to his regular boot mode. Why this option works is a mystery, but it’s worth a shot!

    About Ps4 Safe Mode Loop

    Here’s the story. When PS4 suddenly powered off and can never be powered up again in normal mode, then you come up with the idea – why not boot into Safe Mode? So, you just start off by following the formal procedures.

    • Completely turned off the PS4 console.
    • Press and hold down the power button for approximately 8 seconds until you hear 2 beeps.
    • Now you’re welcomed by the PS4 Safe Mode screen.

    However, in the coming hours or so, no matter how long you expect to access PS4 system storage from the Safe Mode, it just stuck on the screen with an endless loop.

    Read Also: Ps4 Parental Controls Password

    How To Boot In Safe Mode On A Ps5

    Now, lets see how to boot in Safe Mode on a PS5 console.

    Step 1: Hold the power button for about three seconds to power off the PS5 console. The indicator will blink during the process.

    Step 2: After the console is completed off, press the power button again and hold it.

    Step 3: When you hear the second beep that will appear after about seven seconds, you can release the power button.

    Step 4: Connect your controller to the console and then press the PS button. Then you can boot in Safe Mode and see 7 options.

    After booting in Safe Mode, you can select a troubleshoot method from the available options.

    Way : Update Your Ps4 System Software

    How To Turn Off Safe Mode On Ps4

    Here comes the last way. Updating the PS4 system software may also be helpful in terms of how to get PS4 out of Safe Mode.

    To do that, you should select Update System Software on Safe Mode menu and then select Update Using Internet. Then follow the on-screen instructions.

    If the Update System Software option fails to help you get out of PS4 Safe Mode, please select Initialise PS4 . Then you should also follow the on-screen instructions.

    Now, this article comes to an end. Hope all the mentioned ways can help you get out of PS4 Safe Mode Loop effectively.

    Read Also: Why Does My Ps4 Overheat When Playing Certain Games

    More articles

    Popular Articles