Connect Ps4 Controller To Ps3 Console Through Wire
Its very simple to connect PS4 controller to PS3 console through wire. You just need to prepare a USB cable. The USB cable should be able to plug to the PS4 controller and the PS3 console at the same time. A USB 2.0 A to USB Micro B cable is what youll need.
Then plug the cable to the controller and the console. Once the controller and the console are connected, the controller will be paired automatically. You can check it by playing games with the PS4 controller on PS3 console.
How To Connect Ps4 Controller On Ps3 Read This Guide
To use PS4 controller on PS3, you need to connect the controller to the console. If you dont know how to connect PS4 controller to PS3, this guide is what you need. In this post of MiniTool, two methods to connect PS4 controller to PS3 will be illustrated.
Using A Wireless Controller
You can use DUALSHOCK3 wireless controllers and DUALSHOCK4 wireless controllers with your system. Up to 4* controllers can be connected at the same time.
- *
- Some games can be used with only a certain number of controllers at one time. For details, see “Playing a game on a PlayStation®Vita card“, “Playing a game for the PSP system on your system“, “Playing PlayStation® format software on your system“, and “Playing PlayStation®Mobile format software on your system“.
Read Also: How To Turn On Aim Assist Fortnite Ps4 Chapter 2
Differences Ps4 Controller Vs Ps3 Controller
Before we bring any comparison, it is essential to note that the DualShock 4 controller is better than the PS3 controller.
It is miles ahead of the PS3 controller in almost every department. Also, the DualShock 4 is so much better to the extent that most gamers love it more than the Xbox One controller.
It is that good. Just take a look at PS4 and the PS3 controllers below side-by-side, and only by looking at them, you will identify how different they are.
The Analog Button: Ps4 Gives A Better Hold Than The Ps3 Controller
The next difference between the PS4 and the PS3 controller that makes it better is the analog sticks. The DualShocks analog stick is concave. And has divots in the center while the rims are raised. It helps to keep your thumbs in place when you are using the analog button.
Besides, it differs from the DualShock3 controller, which has very uncomfortable concave analog nubs that let your thumb slide off the center quickly. It is something gamers have been struggling with for a while now. So, the PS4 controller has finally solved this problem.
Also, the PS4 controller analog buttons are spaced a bit wider apart, which makes the hold more comfortable, unlike the PS3 controller. These perks make the PS4 controller a better option than the PS3.
Don’t Miss: How To Improve Ping On Ps4
How To Connect Ps4 Controller To Ps3 Easily
If your PS3 controller is not working any more, you may just want to purchase a new controller rather than a new console. Your question now may be if PS4 controller is compatible with PS3 console, and how to connect a new controller to the previous console.
Sony had announced PS4 controller was compatible with PS3 console not long after PS4 was launched. But you had to connect with a USB cable. Now you can also connect wirelessly. In this article, Ill show you how to pair your PS4 controller to PS3 console wired and wirelessly.
NOTE
How Do You Connect A Ps4 Controller To A Ps3
Connecting a PlayStation 4 controller to a PlayStation 3 is as simple as connecting it with a wire.
This will provide you with full functionality for a majority of the PlayStation 3s expansive library of games.
However, its also possible to wirelessly connect the controller.
Youll still need a physical cable to wirelessly connect a DualShock 4 to a PlayStation 3, but once set up is complete, you can disconnect the cable and play wirelessly.
First, connect the controller to the console and power on both devices.
Next, open the settings menu and go to Accessory Settings.
Select Manage Bluetooth Devices and click Register New Device. Click on the Start Scanning option and immediately disconnect the DualShock 4 from the PlayStation 3.
Hold down the PS button near the controllers built-in speaker and the Share button at the same time.
When the light bar on the controller begins to flash, simply plug the controller back up.
Wireless Controller will appear on the screen.
Now you can use your DualShock 4 controller wirelessly with the PlayStation 3.
The entire process takes some trial-and-error and can become quite tedious when required every time you switch the controller from PlayStation 4 to PlayStation 3.
Also Check: How To Cancel Ps4 Pre Order
How To Use A Ps4 Controller On Your Ps3
Even after so many years of use, I still love my Playstation 3. I cant imagine a life without it. As such, I get nervous thinking about the fact that native PS3 Controllers are no longer in production. What happens when my ever so slightly worn out two controllers give up? How will I play my favourite platform games?
Thankfully, Sony made it possible since software version 4.6 to use the newer Playstation 4 controllers on our Playstation 3 systems. Those are available in great numbers and colours, and from what I hear, they even have the same batteries inside as the PS3 controllers did.
Heres how to pair a PS4 controller on your PS3 console:
- switch you the PS3 console using a regular PS3 controller
- head over to Settings Accessory Settings
- select Manage Bluetooth Devices
- choose Register New Device
- on your PS4 controller, press and hold the PS and Share buttons together for a couple of seconds, until the light starts to flash
- select it from the list when your PS3 console finds the controller
And thats it! Now you can use your PS4 controller with your PS3 console. How cool is that? Now you can use a brand new controller on your old console, or play that multiplayer game youve never had a second controller for.
Connect Ps4 Controller To Ps3 Wirelessly
If you prefer your controller to be wireless as explained above, then you can connect your PS4 controller to your console using Bluetooth.
Before you attempt to set this up, you need to make sure that the system software of your PS3 is up-to-date. As explained before if it is not recent, then it will not work. If your software version is not 4.6 or higher, it will not work.
To check your system software version, you go to Settings > System > Settings > System Software. It will show you the version of your software. However, the current version of Sony is 4.82, and it is better to get that, to avoid problems and be on the safe side.
After you are sure that your system is up to date, then you can follow the steps below to pair the controller to the console:
Step 1: Connect your DualShock 4 to the PS3 console using a USB cable. Make sure that you are using the right USB cable. Put the controller and the console on at the same time.
Step 2: Now, go to the XMB Menu. After that, select the Settings tab, after which you click on Accessory Settings and then choose Manage Bluetooth Devices.
Step 3: If you have not paired any Bluetooth device to your PS3 console in the past, you will see the message: The Bluetooth device has not been registered. Do you want to register it? In this situation, select Yes using the X button on your controller.
Also Check: How To Link Ps4 Accounts
How Many Controllers Can You Connect To A Ps4
A great question regarding the PS4 is how many controllers can you connect to it? You may want to play a game with your friends or family but arent sure how many people can play at once.
Although some party games only require 1 controller to play, you might want to play some other couch co-op games like Borderlands 3 or Overcooked, so youll need some more controllers.
The PlayStation 4 can support up to 4 controllers connected at the same time. Providing a game supports couch co-op of up to 4 players, this means you and 3 other people can play a video game at once.
In fact, when you have connected 4 controllers to your PS4 youll see that each of them has a different colored LED to signify which player you are:
- Blue Player 1
- Green Player 3
- Pink Player 4
To learn more about the ins and outs of the PlayStation 4 controller, I wrote an in-depth article that you can read here:
To connect a DualShock 4 controller to your PS4 console:
If you have any issues connecting your DualShock 4 to your PS4 here is a link to the PlayStation Support page on DualShock 4 troubleshooting: Pairing and Connecting DUALSHOCK 4
Using Bluetoothctl To Connect Your Ps3 Controller
1. With the PS3 Controller now ready to be connected with our Raspberry Pi we can move onto actually pairing it with the Raspberry Pi.
To do this, we need to first start up the Bluetooth configuration tool by running the following command on the Raspberry Pi.
sudo bluetoothctl
2. Now that we have launched up the Bluetooth configuration tool, we need to switch the agent on and set it to utilize the default-agent. Just type in the following two commands to do this.
agent ondefault-agent
3. Once we have enabled the agent we now want to actually scan for new Bluetooth devices, running the following command will tell the tool to start scanning.
scan on
You will notice immediately that any Bluetooth device in the area will start showing up in your command line.
Ignore these for now as we only want to pay attention to the PS3 controller itself.
4. Now is the time to press down the PlayStation button on the controller, so it begins to talk to the Raspberry Pi. You should soon start to see entries appear in the command line.
5. Once you see something like the following appear, make sure you copy down the MAC address that is displayed. It is the sequence of text that is separated with : symbols.
Device B8:27:EB:A4:59:08 B8-27-EB-A4-59-08 Device B8:27:EB:A4:59:08 Connected: no Device B8:27:EB:A4:59:08 B8-27-EB-A4-59-08
6. Now that you have a MAC address available copy it down, in our example, this is B8:27:EB:A4:59:08.
connect YOUR_MAC_ADDRESS
trust YOUR_MAC_ADDRESS
quit
Read Also: Can You Connect Ps4 Controller To Pc
Using Sixad To Connect Your Ps3 Controller
1. Before we get started with compiling and setting up SIXAD on our Raspberry Pi, we must first install a few packages that we require.
The essential packages here are libusb-dev and libbluetooth-dev as they contain the code that we need to compile the sixad software.
Libusb-dev contains code that allows us to interact with USB devices that are plugged into the computer through code.
Libbluetooth-dev provides the code required to be able to interact with the operating systems Bluetooth stack. In sixads case this is used to detect when a PS3 device is connected to the Raspberry Pi.
sudo apt install git libbluetooth-dev checkinstall libusb-devsudo apt install joystick pkg-config
2. Now that we have all the packages that we could need lets go ahead and clone the SIXAD repository from Retropie, the reason we use Retropies fork is that it has a few improvements and is tested on the Raspberry Pi.
Run the following two lines on your Raspberry Pi to clone the GIT repository.
cd ~git clone https://github.com/RetroPie/sixad.git
3. With the repository now cloned to our Raspberry Pi, we can now move onto actually compiling it. Compiling SIXAD is simple to do and just requires to run the following two commands.
The first command moves us into the folder, the second line runs the makefile and compiles the program.
cd ~/sixadmake
4. Now with the sixad software now compiled there are a couple more things to be done before we can use it.
sudo mkdir -p /var/lib/sixad/profiles
How Do I Connect A Ps4 Controller To A Ps3 Wirelessly
Wireless seems to be the in-thing at the moment, and rightly so. Who wants loads of cables all over the place? Theyre just a tripping hazard!
Evidently Sony thought the same, so they made the PS4 controller wirelessly compatible with a PS3!
A few years ago a new update was sent out to improve the PS3s firmware. This so-called 4.60 update allowed for wireless connections between PS4 controllers and PS3 consoles! There was also a new update to the PS4 controller itself too the 1.72 update.
A win for all!
Anyway, back to business. Heres how you connect your DualShock 4 wirelessly to a PS3:
Step 1: Plug in your PS4 controller to your PS3 using the USB cable and switch on your PS3
Step 2: Go to Accessory Settings and select this option
Step 3: Select Manage Bluetooth Devices
Step 4: Press Register a New Device
Step 5: Now the PS3 will start to scan for possible devices disconnect USB cable now
Step 6: As the PS3 scans for new devices hold down the PS and Share buttons on the PS4 controller
Step 7: When the light bar on the PS4 starts to flash the PS3 and PS4 controller have synced plug the USB cable back in
Step 8: Select Wireless Controller and unplug the USB cable. The process is complete
Okay, so the wireless route may seem a little bit more fiddly but in the end, youll get a wireless controller to play with! You really dont need to spend more than 10 minutes tops doing this too.
Recommended Reading: How To Record Shows On Playstation Vue
Dualshock 4 Compatible Playstation 3 Games
This page contains a list of DualShock 4 Compatible PlayStation 3 Games. You can simply plug a DualShock 4 into a PS3 to play the games on this list. These PS3 games are fully compatible with the PS4’s DualShock 4 unless otherwise stated.
With the recent 4.60 update, the DualShock 4 can now be used wirelessly
-Under “Accessory Settings” on your PS3, locate and select “Manage Bluetooth devices”. Select “Register New Device.” The PS3 will begin Bluetooth scanning. Simultaneously press and hold the DualShock 4’s “Share” and “PS” buttons until the controller light bar starts blinking. The controller should then appear in the PS3’s list as a “Wireless Controller.”
However, there are some limitations when using the DualShock 4 on the PlayStation 3. These are:
- No Rumble Feedback
- Motion Sensing does not work
- Touch Pad does not work
- PS Button does not work
- Speaker on DualShock 4 does not work
- Headset port does not work
- Light bar has no effect on the game, as it just stays a whiteish, blue colour
Unpair The Ps4 Controller
Before you connect the PS3 controller to your PS4 console, you might need to unpair the PS4 controller that is currently connected at first. Heres how to do that.
Step 1: Connect the PS4 controller to the CronusMax Plus adapter and then connect the adapter to the PS4 console.
Step 2: Turn on PS4 and navigate to Settings> Devices> Bluetooth Devices.
Step 3: Now choose the PS4 controller and choose Forget Device from the right pane.
Step 4: Select OK to confirm the operation.
Also Check: Where To Get A Playstation 5
Preparing Your Ps3 Controller To Connect To The Raspberry Pi
1. Before we get started with installing anything on our Raspberry Pi, we must first run the following two commands.
These commands will ensure that your Raspberry Pi is up to date.
sudo apt updatesudo apt upgrade
2. To begin we first need to install a package, this is so we can compile the sixpair software. This package being the libusb-dev, this is for programs to interact with USB devices.
sudo apt install libusb-dev
3. With our required package now installed we can go ahead and download the sixpair code and make a folder for it.
mkdir ~/sixpaircd ~/sixpairwget http://www.pabr.org/sixlinux/sixpair.c
4. Now with the sixpair code downloaded to our Raspberry Pi, we need to compile it, to do this we can just run the following command.
This command will tell the GCC compiler to compile the code.
gcc -o sixpair sixpair.c -lusb
5. With Sixpair now compiled on our Raspberry Pi, we need to plug our PS3 Controller into the Raspberry Pi using the USB mini cable.
6. Once the controller has been plugged in, we can run sixpair by running the command below.
Sixpair will re-configure the controller so that it will talk with our Bluetooth device.
sudo ~/sixpair/sixpair
7. If the sixpair software has successfully reconfigured the PS3 Controller to talk with your Raspberry Pis Bluetooth dongle, then you should see something like below appear on your command line.
Current Bluetooth master: b8:27:eb:a4:59:08Setting master bd_addr to b8:27:eb:a4:59:08
Setting Up Playstation Controllers On The Raspberry Pi
If you have ever tried to utilize a PlayStation controller with the Raspberry Pi, you may have found its not very simple to do. Hopefully, this tutorial will help simplify the process.
Our Raspberry Pi PlayStation controller guide will walk you through the process of setting up and connecting both PlayStation 3 controllers and PlayStation 4 controllers.
For PS3 controllers, we show you how to install the six-pair software and utilize it to set up your PS3 controller so it can connect to whatever Bluetooth device you are using on your Raspberry Pi.
In this PS4 controller tutorial, we walk you through the process of pairing it with the Raspberry Pis Bluetooth and also offer alternative solutions if your controller doesnt work with the standard Bluetooth stack.
You can also set up Xbox controllers on the Raspberry Pi, as well as several other types of game controllers.
Setting up controllers is the perfect way to have your Pi ready to play some games. You might also be interested in using the controllers in other Raspberry Pi projects that make use of a gamepad.
Recommended Reading: How To Sign Out Playstation Network