How To Use Ps4 Controller On Switch

Pros And Cons In Using A Ps4 Controller On Nintendo Switch

Every gaming console is unique in its own way and some games, especially those that are considered exclusives such as Zelda: Breath of the Wild may only offer partial third party controller support. In my experience, using a PS4 controller with Zelda: Breath of the Wild is awkward and not as intuitive as the default Joy-Con controllers. However, Animal Crossing New Horizons fully supports PS4 functionality. In other words, it all boils down to the game youre trying to play.

If you have an unused PS4 controller lying around, one of the obvious advantages of having Nintendo Switch third party controller support is savings. You dont need to sell, give away, or sell your PS4 controller as it can work as your Switch backup controller, or even the primary one if you want.

A Joy-Con controller is expensive so if you cant afford to get a replacement one right away, you can get a special Bluetooth adapter instead so you can use a PS4 controller and continue playing.

There are a number of understandable limitations when using a PS4 controller on your Switch too. For one, button mapping can be different due to the physical arrangement of the buttons on the PS4.

If you are used to waking up your Switch with your Joy-Con controller, youll find that impossible with the PS4 controller. You want to use one of your Joy-Cons to fire up your console.

Nintendo Switch Gaming Cheaper Price

Compared to the Nintendo Switch Pro controller, buying the adapter is a cheaper alternative when going for Joy Con alternative. As seen on Amazon, the third-party Nintendo Switch wireless adapter costs just $20, often less.

Meanwhile, an official Nintendo Switch Pro controller costs around $50 on . If a DualShock 4 is already available, going for the adapter setup will save you money. However, the only problem on the DualShock 4 setup is that it may not have all the functionality of a Switch Pro controller.

Is Bluetooth Adapterrequired Using A Ps4 Wireless Controller On Nintendo Switch

If you are going to use a PS4 Dualshock controller with your Switch, you will need to get a Bluetooth adapter.

But you wont be able to use the adapter that connects the Joy-Cons to the console. Since it is designed exclusively for the latter. So you must have another adapter in order to connect the DualShock.

Theres no specific Bluetooth adapter that Nintendo recommends but some of the known brands that work seamlessly with the Switch are 8bitdo and Mayflash.

Read Also: How To Delete Saved Game Data On Ps4

How To Connect Ps4 Controller To Pc With Bluetooth

If your PC supports Bluetooth, you can pair and connect your controller wirelessly.

1. Open your PC’s search menu and search for Bluetooth.

2. Select Bluetooth and other devices settings in the search results.

3. Make sure your computer has Bluetooth enabled by setting the switch labeled Bluetooth to On.

4. Hold down the Playstation and on your controller until the backlight starts flashing.

5. On your PC, click Add Bluetooth or other device, and select Bluetooth.

6. You’ll see your PS4 controller listed as Wireless Controller. Click it to finalize the connection. If you’re asked for a passcode, enter 0000.

Is Nintendo Switch Supports Third Party Controllers

The thing is that the Nintendo Switch is an adaptive console. Besides the fact that it can work with the basic Nintendo controllers GameCube and Wii U Pro, it also allows you to play on the controllers of its competitors .

If you have a Wii U adapter, you can safely use your old GameCube controller with the Switch. If you dont have the default Nintendo adapter, third-party adapters can also work fine.

In 2021, with the popularity of gaming consoles, Nintendo did a good thing by giving users the ability to combine controllers of different consoles with the Switch. If you are into fighting games, youll also be pleased to know that you can use specialized arcade fight sticks with the Switch too.

Read Also: Why Can’t I Sign Into Playstation Network On My Ps4

What Games Can I Play With Gamepad

There arent a great deal of Oculus Go games that support gamepads, but there are some good ones all the same. Perhaps the most obvious choice is stealthy sneaking game, Republique, which is pretty well playable once you adjust to the latency. Its a little more of a hassle to control Oculus free Herobound games, but worth a shot if youre willing to put up with the fight. Personally? I have to give a shout out to Lands End, a brilliant exploration game thats slow pace wont be an issue.

You Can Use Controllers From Other Game Consoles With The Switch

Some gamers want to use controllers from other console systems. Other game consoles, including the Xbox One and the DualShock 4 controllers, support controllers for the Switch. The majority of controllers that work with the PlayStation 4 or Xbox One, including arcade-style fight sticks like the Mayflash F300, are compatible with Nintendos console. It works with the Switch if you have an Xbox One, Xbox Series X, or Xbox Series S controller . To accomplish this, youll need to use a cheap USB adapter from Mayflash. The adapter enables you to use your controller on the Nintendo Switch without the need for a new console. When the adapter is connected to your Nintendo Switch, the other end of the cable is routed to the controller. You have now entered the appropriate stage for using your controller.

Recommended Reading: How To Play Two Players On Ps4

How To Connect Controller To Switch Without Adapter

To connect a controller to a Switch without an adapter, you will need to use a USB cable. First, make sure that the Switch is turned off. Then, connect the controller to the Switch using the USB cable. Finally, turn on the Switch. The controller should now be connected.

In terms of sales, the Nintendo Switch is one of the companys most popular consoles. Consoles other than this one are lacking in terms of a unique gaming experience. There is no need to attach an Xbox 360 controller to a Nintendo switch. Both controllers have Bluetooth connectivity, so simply pair them together.

Can You Connect Ps4 Controller To Nintendo Switch Explained

Nintendo Switch owners enjoy the gaming experience with Joy-Cons. These are two separate controllers that are designed exclusively for playing on the Nintendo Switch. However, the thing is, they have a rather non-standard shape for a regular controller, and many people cant take long to get used to them. Some people find the shape of Joy-Cons uncomfortable and the size small and prefer classic controllers from the PS or Xbox.

The good thing is, the Nintendo Switch supports other controllers like that PS4 controller and Xbox One controller so if youre into one of those, all you need is to set it up with the console. If you want to use a PS4 controller with your Switch, follow the steps in this guide.

Also Check: What Do The Lights On The Ps4 Controller Mean

Attach The Controller To Your Computer

Once youve successfully connected a PS4 controller to your Nintendo Switch, attach it to your computer by removing the protective cover that covers up most of its ports . Once inside, you can connect any of its ports to any of the ports on your computer. This includes + Power + HDMI-A HDMI output + HDMI-C HDMI input + USB USB A output + USB USB C input Once youve attached a PlayStation 4 controller to your computer, open up the software that came with it so that you can configure it for use with Windows. This will also allow you to change which buttons are mapped as well as set up macros for certain key presses so that pressing one button will trigger multiple actions or inputs.

Play Switch Games The Way You Want To Play Them

Whether youre suffering from the dreaded Joy-Con drift, have hands too big for the undocked Switch controller, or just happen to prefer the PlayStation Controller, then the option is there. Of course, if its the size or shape of the Joy-Con that is the issue, there are plenty of other Switch controllers to consider using instead.

Recommended Reading: What Does White Light On Ps4 Mean

How To Hard Reset Your Controller

If re-pairing the controller doesnt work, the issue might be with the controller itself and not the PS4. In that case, youll need to reset the controller. Youll need an unfolded paper clip with which to push a hidden button on your PS4 controller to reset it.

Step 1: Turn off your PS4 and unplug both it and your internet router or modem so that your controller wont receive any network signals when you reset it.

Step 2: When thats done, flip the controller over and look for a small hole on the right side. Push the paperclip in the hole and push the button inside for three to five seconds. Its best to hold it down for a count of 10 to be sure.

How To Use A Wireless Ps4 Controller On Your Nintendo Switch

Time Needed :5 minutes

Once you have the compatible Bluetooth adapter taken care of, you simply have to plug it into the dock to connect your PS4 controller to your Nintendo Switch.IMPORTANT: Make sure that you PS4 controller is not synced with the PS4 console. Turn off your PlayStation console first to avoid interference.In this demonstration, I am using the 8bitdo wireless adapter. Follow the steps below to connect the controller to your Switch:

Tools

• Nintendo Switch

You May Like: How To Disassemble Ps4 Controller

How To Use A Ps4 Controller With Nintendo Switch Consoles

Keep this in mind:Wireless adapters only work while the Switch is connected to the Dock or with a USB-C adapter.

1. Plug your wireless adapter into one of the USB ports on the side of the Switch dock.

2. On your Switch, go into the System Settings.

3. Scroll down and select Controllers and Sensors from the menu.

4. Select Pro Controller Wired Communications to turn it on.

5. With your Switch docked and awake, push the Pairing button on your wireless adapter.

6. On the PS4 DualShock Controller, hold down the PS button and Share button simultaneously. The indicator light will blink white to show it’s in pairing mode.

7. Once the white blinking on the PS4 DualShock controller turns solid blue, it should be paired. If it’s not, follow the steps again.

So, there you have it. Now you know how to use a PS4 controller with Nintendo Switch consoles. Now, it’s time to play some of the best Nintendo Switch games. The Joy-Cons are certainly fun, but sometimes you might want a controller with a little more heft to it. This is a great workaround if you don’t want to plunk down some cash on a Nintendo Pro Controller.

Turn On And Sync Your Ps4 Controller

Now, turn on your Bluetooth controller. Press the button on the side of the Mayflash adapter once, and then press the SYNC button on your controller. The LED indicator should light up, signifying that your controller is paired with the adapter. You should be good to go at this point, so fire up your favorite game and enjoy.

You May Like: How To Erase Ps4 To Sell

Limitations Of Using A Ps4 Or Xbox Controller With The Switch

Unfortunately, it’s not possible to wake up the Switch from sleep mode with a non-Nintendo controller, so you’ll still need a pair of Joy-Cons. You may also have to occasionally undock your Switch and put it back in to get the adapter to recognize other controllers. That said, since both Joy-Cons still work while the PS4 controller is connected, you can play multiplayer games with your PS4 controller.

The button mapping is intuitive, although it’s important to note that pressing the PS4 controller touchpad will take screenshots. The button on the DualShock 4 is also mapped to the minus button on the Joy-Con.

Connect A Usb C Cable From Your Computer To Your Nintendo Switch

Once youve installed all of the necessary drivers and successfully connected a PS4 controller to your Nintendo Switch, connect a USB C cable from one end of it to one end of a USB C cable that connects directly between two USB ports on your computer . You dont need both ends of this cable plugged into two different computers simply connect one end to the USB C port on your computer and the other end to a USB C port on your Nintendo Switch.

Recommended Reading: How To Get Barrier Blocks In Minecraft Ps4

Making Your Ps4 Controller Discoverable

Pair your DualShock4 controller with your Bluetooth dongle by making your PS4 controller discoverable. To do this, press the and the PlayStation button for three seconds, or until the light bar at the top of the controller shows a double blinking pattern.

Note: if the PS4 system your controller is synced to is still plugged up, then your controller might try to connect to it if you press the PS button.

Dualshock 4 Wireless Controller Support

Find out how to pair and charge a DUALSHOCK®4 wireless controller with your PlayStation®5 console or PlayStation®4 console, and how to change controller settings.

How to pair your controller with a PS4 console or PS5 console

• If your controller is turned off, press the PS button. After the light bar blinks, the player indicator lights up.
• When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly.
• Please note, your controller can pair with only one console at a time. When you want to use your controller on another console, you’ll need to pair it with that console.
• You can use up to 4 controllers at the same time. When you press the PS button, a color is assigned to each player.
• If youre having issues pairing your controller with your console, please visit PlayStation Repairs.

How to connect a DUALSHOCK 4 wireless controller with other devices

You can use your controller away from your console. Find out more about compatible devices, applications, and feature support by visiting the guide below.

How to charge a DUALSHOCK 4 wireless controller in rest mode

To charge your controller while your console is in rest mode:

Select your console below.

Don’t Miss: How To Reconnect Controller To Ps4

Alternative: How To Go Usb

Its also possible to skip over the Bluetooth wireless connection and play with your DualShock 4 as a wired controller, with a USB-enabled connection. Thats obviously not ideal when you could potentially play wirelessly, but its a potential workaround when connectivity and signal issues persist. You can set a controller to only communicate with the PS4 via USB when its plugged in by changing the controller settings in the Devices menu, as noted above. Under Devices, navigate to Controllers, and then set any controllers to only communicate via USB when theyre plugged in. That way, signal issues or Bluetooth problems shouldnt affect the controller, so long as youve got a wired connection.

Thinking about upgrading to the PS5? Take a look at our guide to see how the PS4 and PS5 compare.

Editors’ Recommendations

Nintendo Switch Controller Adapters

While the Nintendo Switch has Bluetooth capabilities, you need a special adapter to connect third-party peripherals. The Mayflash Magic-NS Wireless Controller Adapter is a versatile tool compatible with many consoles, so it’s a worthwhile investment if you have a lot of old peripherals.

Other options include the 8Bitdo adapter, which also supports Wii remotes and DualShock 3 controllers. Considering the high price tag of the Switch Pro Controller, a $20 adapter is preferable if you already have units for other systems. Just make sure it’s compatible with the Switch.

You can only connect one controller per adapter, so you’ll need two adapters to use multiple peripherals.

• Can I use a Switch controller on a PS4?

  Yes, but you’ll need a Magic-NS wireless adapter and a CronusMAX PLUS adapter. Plug the CronusMAX into the PS4, connect a USB hub, then connect the Magic-NS and the Switch controller to set it up.

• Can I use my PS4 controller on Nintendo Switch in portable mode?

  Not on the original Switch, but if you have a Switch Lite with a USB port, you can connect your PS4 controller using an adapter.

• What is the button layout on a PS4 controller if it’s used on a Switch?

  The layout of the controller is the same based on the position of the buttons, so X=A, Circle=B, Square=Y, and Triangle=X.

You May Like: Should I Buy Ps4 Or Wait For Ps5