Wednesday, September 28, 2022

How To Format External Hard Drive For Ps4 On Mac

Don't Miss

Convert Ntfs To Fat32 Without Data Loss

How to Format External Hard Drive Mac

Format to exFAT is one method to use PS4, after backing up and restoring data to the external disk, may take some time but won’t meet the limitation of FAT32 file system, which is 4GB maximum size of single /individual file. But if you don’t want to spend time on making a backup and restoring after formatted, you can do a conversion on NTFS file system, just convert it to FAT32, another supported file system for PS4, with Partition Expert. Besides, single file maximum size gets over 4GB is not common in small sized games in PS4. Steps to convert to FAT32 for PS4:

  • Download the portable bootable partition software from here:
  • Run it to show disk-map on your computer, still the same, check the status of the external disk: unallocated space or single volume or uninitialized?
  • For unallocated space disk, we click Create Volume and select FAT32;
  • For single volume disk, click the partition and click Convert to FAT32
  • For uninitialized disk, we click Initialize and Create Volume to make FAT32 partition
  • Ps4 Extended Storage Error Codes

    Use a USB External Storage Device that fulfills the following requirements:

    • 250 GB minimum, 8 TB maximum capacity

    Use a USB External Storage Device that fulfils the following requirements:

    • USB 3.0 or later
    • If your HDD is definitely USB 3.0, connecting it too slowly might cause this error message. Connect the USB External Storage Device quickly and firmly, but carefully.
  • Reconnect the HDD and repair file system following instructions.
  • Format the HDD again.
  • If the error persists, you may need to use a different HDD.
  • How To Transfer Ps4 Data To External Hard Drive

    When the PS4 external hard drive format has been finished, you can finally start to move games and applications to PS4 external storage from system storage.

  • Go to PS4 Settings.
  • Select Storage from the list.
  • Select System Storage where the apps are located right now.
  • Choose Applications under System Storage.
  • Click on the Options Menu button.
  • Choose Move to Extended Storage option.
  • Add a checkmark to all the applications you want to move .
  • Click on the Move button in the lower right corner.
  • Choose OK to confirm your selection.
  • Wait for the moving process to complete.
  • Sometimes, you will find the applications you need are lost during the transferring/deleted by mistake/disappeared after drive formatting. On this occasion, you must use a reliable data recovery tool to recover lost files immediately.

    How to get the data back from the System Storage of PlayStation:

    Step 1: get MiniTool Power Data Recovery and install it properly on your PC.

    Step 2: connect your PS4 to PC properly, and then launch the data recovery software.

    Step 3: select This PC or Hard Disk Drive from the left sidebar.

    Step 4: choose the target drive from the right pane and click Scan in the lower right corner.

    Step 5: browse and preview the scan result to pick out which files are needed. Then, check them all and click Save.

    Step 6: choose another drive as the storage path for the recovered files. Then, click on the OK button to confirm and wait for the recovery to complete.

    Recommended Reading: Ps4 Controller With Dolphin

    Ok What Are My Alternatives To Using Exfat

    The good news is, it’s not exFAT or nothing. The alternative solutions do require more tinkering.;

    Option 1: Format to NTFS and buy this app for your Mac

    If you keep your hard drive’s out-of-the-box NTFS format, you’ll be able to read the drive when it’s connected to a Mac, but you won’t be able to write to it. In other words, you can look at files saved on the drive, but you can’t save any new files from your Mac. In order to enable read/write access, you’ll need to purchase a third-party solution such as Paragon NTFS. It’s $20, and is compatible with all Macs, even the more recently announced M1 Macs.;

    Option 2: Format to APFS and use a different Paragon app

    Conversely, you can format the HD to APFS and use Paragon’s APFS for Windows to read and write to the Mac-formatted hard drive. The only downside is that it’s $50. With it installed, you’ll be able to read/write to APFS drives on a Windows PC.;

    You aren’t stuck with your drive formatted for one platform forever.;

    Option 3: Create two partitions on your hard drive to use with each OS, separately.

    This solution is a little different than the previous two because instead of having one hard drive that works with both machines, you’re splitting your HD into two sections, each dedicated to a different OS. For example, if you have a 1TB hard drive, 500GB of storage can be used with your Windows computer, and 500 will be dedicated to your Mac computer.

    See also

    The Best Formats For External Hard Drives For Mac And Pc

    How To Format A Hard Drive (Mac)

    Choosing an ideal file system and format for external hard drives can be really befuddling. Picking some unacceptable one can transform into a genuine agony when you need to reinforcement and reformat a whole drive since it will not work for its proposed reason. One of the middle ground and best format when you need to interchange and share data between mac and windows pc is ExFat.

    External Hard Drive Compatible With Mac and PC without Formatting

    Both working frameworks can peruse and compose data to the ExFat external hard drive. You can easily transfer your data files, video and photos. Tune into and enjoy the similar mp3s. Work on similar documents, insofar as youve appropriate applications that can peruse those records.

    In the event that you need your hard drive viable with macintosh and pc without any additional formatting and designing, you should utilize exFAT. With that, you can easily save documents of any size, and use it with any PC made over the most recent 20 years. Another best external hard drive formats compatible for mac and PC both are FAT32 or MS-DOS FAT as it is approached on mac computers.

    You May Like: Rainbow Six Crossplay

    Format To Exfat In Disk Management

    • 1. Press Windows + R to open Run box and type: diskmgmt.msc, hit Enter and Disk Management will show;
    • 2. Check the disk map in the main interface to see if the external hard drive shows unallocated space or volume;
    • 3. If it shows unallocated space, right-click on it and click New Simple Volume, follow the wizard to create new partition, click NEXT slowly and stop at the Format Partition window. Now it’s time to click exFAT under File system option.
    • 4. If the external disk shows volume label in Disk Management, just click Format⦠from the right-click menu after you backed up private data.
    • 5. In the popup window, we select exFAT and start to format.

    This Usb Storage Device Cannot Be Used Ps4 Faqs

    Here are a few more questions related to PS4 can not use this USB;storage device problem. If you also have any of these questions, you can find the answers here.

    Why does my ps4 not recognize my USB?

    PS4 can only recognize the file systems exFAT and FAT32. If your PS4 USB storage device cannot be used,;the;file system limitation;is the reason.;In other words, your USB drive is formatted as NTFS, which is not compatible with PS4.;So, to make your PS4 use the USB drive, you need to convert the file system to FAT or exFAT.

    How do you fix USB storage on PS4?

    To fix the USB storage device on PS4, first, make sure the;storage device;is FAT or exFAT formatted.;Then, connect the;USB;drive to PS4, go to;”Sound/Devices”;> “Stop Using Extended;Storage”;on the quick menu and then reconnect it.;

    Why won’t my PS4 find the update file?

    When PS4 cannot find a system software update file on the USB storage device, you may get the SU-41350-3 PS4 error code. Before upgrading your PS4, make sure that:

    • The USB storage device you are using to update the PS4 is formatted to FAT32 or exFAT.
    • Ensure the file path is exactly:;USB storage > PS4 > UPDATE;.
    • The file name should be PS4UPDATE.PUP.

    You can find the update file;on the PS4 System Software page;to upgrade.

    What is a USB storage device for Playstation 4?

    When you connect a USB storage device to your PS4, it will;appear in a list. You can use it as;extended storage. Go to “Settings”;> “Devices”;> “USB Storage Devices”.;

    Was This Page Helpful?

    You May Like: How To Edit Faster In Fortnite Ps4

    Why Do You Want To Format An External Hard Drive

    A brand-new external hard drive is usually partitioned into s single partition with NTFS file system. Still many users would like to format the external hard drives and people do that due to various reasons:

    • Format external hard drive to required file system. The brand-new disk you purchase might not be formatted to the file system type you need. To change file system type, formatting should be done.
    • To quickly remove content from external hard drive. Quick formatting is able to format a partition within seconds, and all data on the volume will be deleted. This is a good solution to delete data and free up disk space.
    • To optimization performance for disk. Formatting can clear data fragmentation quickly and easily.
    • Remove virus or malware. Since external hard drive might be used on many computers, it tends to infect virus. Many users would format it to clear virus and avoid more damages.
    • To fix file system errors. Sometimes external hard drive may become RAW or reports errors like The file or directory is corrupted and unreadable, you can fix these errors by formatting the volume after file recovery.

    So Isn’t Exfat The Obvious Solution

    How to install a hard drive into any PS4 (Formatting & OS Install)

    According to the list above, formatting your hard drive to exFAT so that you can read and write on either a PC or Mac seems like the obvious solution. And if that’s how you plan on using your drive, then you’re right — exFAT is the way to go. However, if you plan on only using a drive on your Mac and it has MacOS High Sierra or newer installed, you’ll want to stick to Apple’s APFS format. And the same can be said for a Windows HD, if you only plan on connecting it to a PC, then NTFS is the way to go.;

    Mac or PC? That is the question.;

    Also Check: How Long To Fully Charge Ps4 Controller

    Why You Cant Use The Same External Hard Drive For Mac And Pc

    As external hard drives are becoming the essential storage medium for both the mac and windows PC users. But normally it is impossible to read or write the data files from one hard drive between both mediums. You might be asking, why is it like that. Normally there are these main issues

    • Macintoshes and PCs utilize totally distinct file framework. Windows data system is non-functional by Mac. As, Mac uses the different system formats i.e. HFS file system, which is not recognized by windows without introducing outsider programs. Similarly windows utilize the NTFS record framework. They both use the distinctive record framework albeit a few configurations are general like JPG.
    • Windows can read or write only those hard drives that are formatted on NFTS framework. Hard drive designed for Mac has either a HFS or HFS+ record framework. Thus, a Mac-organized hard drive isnt straightforwardly viable, understandable or comprehensible by a windows PC. Because its HFS format is not discernible by PC.
    • You just have perused authority to external hard that is formatted on different file system.
    • You cannot write or add anything to the macs external hard drive due to hard drives file and data corruption.

    Best External SSD For Gaming

    External Hard Drive Not Recognised On Your Mac It Could Be Down To The File Format

    ByLewis Painter, Senior Staff Writer| 28 Apr 2020

    If youve just bought yourself a shiny new external drive and cant get it to work on your Mac, its possible that the drive isnt compatible with macOS. But unlike other electronics on the market, its possible to reformat an external drive to work with the operating system of your choice. Its easy to do on a Mac using Apples built-in Disk Utility, and heres where we show you how.;

    Read Also: How To Reset Ps2 Parental Control Password

    External Hard Drive For Mac And Pc With Data Interchangeable

    Youd like an external hard drive where both your Mac and your PC can interchange files or listen to the same MP3s?

    Or is it that your household has a few Macs and PCs.

    Macs and PCs you use for various jobs. And youd like a central external hard drive to share and pop files onto.

    The Good News!

    The good news is. You can shape pretty much any external hard drive that can plug into both your Mac and your PC.

    And ;change your drive so that both Mac and Windows can read and write to it.

    And all you need is a little know how.

    Samsung T5 Portable Ssd

    Format External Hard Drive for Mac [ Reformat External ...

    Accessible from the minimum of 250 GB size as far as up to 2TB, this external SSD by Samsung composes at 540MB/s, its an outstanding rate. It utilizes a USB-C like cable. This drives is labeled as one of the best portable SSD drive available today.

    It is already formatted to deal with Windows, Mac and even android also. ;An assortment of capacity alternatives makes it simple to pick the correct size for you. This drive is additionally every durable, solid and extremely portable.

    You May Like: How To Play Roblox On Ps4

    What Is The Best Format For External Hard Drive Mac

    The first step to formatting your external drive for a Mac computer is choosing the right format. There are four possible choices:

    • APFS
    • exFAT
    • FAT

    To understand which is the best for you, let’s have a comprehensive overview of each of them.

    1. Apple File System

    The APFS was first introduced in 2017 as a replacement for the HFS+. Nowadays, all new Macs come with the operating system preinstalled on APFS, as this system is optimized for use with SSD and flash storage drives. However, it still works with traditional HDD drives too.

    This is the best format to pick if you have an external SSD or USB flash drive that you don’t intend to use with a Windows device.

    The biggest strength of this system is the speed, as well as the encryption and metadata handling. However, you won’t be able to use this system with Time Machine.

    2. Mac OS Extended

    The HFS+, or Hierarchical File System plus on its real name, was the main file system used for Mac until 2017.

    This type of file system is suitable to use with both HDD and SDD drives, but the latter will perform slightly better with the APFS mentioned above. If you have an older Mac, though, choosing the HFS+ is your best bet.

    In general, all external drives formatted to HFS+ work nicely with older Mac versions but are incompatible with Windows.

    3. Extended File Allocation Table

    4. MS-DOS

    Typically, there is no reason to choose this option unless you’re planning to use the external hard drive on a Windows XP or earlier machine.

    Spotlight Search Disk Utility

    Youve free software on your Mac. Its part of your Macs operating system. And that software will format your Seagate drive for you.; The name of the software is Disk Utility.

    You find it by doing a Spotlight search.

    Then type in Disk Utility and press the return key.

    Double click on Disk Utility to start up the program.

    Also Check: How To Cancel Ps Now

    Best For Thunderbolt 3 Ssd Speed

    Pros

    • Extremely fast data transfer speeds, thanks to Thunderbolt 3 and PCIe NVMe interfaces.
    • Multiple capacity options.

    Buying an external hard drive for your Mac is not all that different from buying one for your Windows PC, except for one very important complication: The latest Mac laptops only come with Thunderbolt 3 ports, but the arrival of Thunderbolt 3-equipped drives has been a trickle, rather than a flood. Most of the current models that use the Apple-friendly interface are designed for photographers and video editors who need to store mountains of footage and access it very quickly. As a result, they are typically external SSDs, or multidrive RAID arrays, which means they’re also very expensive.

    So what’s a Mac user to do who just wants to back up his or her files using Time Machine, or stash a large video collection? Read on as we solve this and all of your other Mac external-storage quandaries.

    Why Format External Hard Drive For Ps4/ps3

    How to Use External Hard Drive On PS4

    It is necessary to realize the file system compatible with PS4/PS3 before using external hard drive for PS4/PS3 For PS4, it can support FAT32 and exFAT; for PS3,it can support FAT32 file system. But external hard drive is typically formattedwith NTFS file system. Therefore, it is necessary to format the external hard drivefor your PS4 or PS3.

    As both of FAT32 and exFAT is compatible with PS4, you can havea basic understanding before making a decision to format external hard drive toexFAT or FAT32 for PS4.

    To put it simply, FAT32 shows an advantage in compatibility while has limitation infile size and partition size. It doesnât allow you to save single file larger than4GB and supports up to 2TB in volume size. exFAT file system makes up thelimitation of FAT32 in file size and volume size but it is easier to be corrupted compared with FAT32.

    Don’t Miss: How To Edit Faster In Fortnite Ps4

    Way : Format Ps4 External Hard Drive Via Disk Management

    Disk Management built in Windows is also a good utility to help you format disk. To format an external hard drive for PS4, please refer to the follwoing steps.;

    Step 1: Connect the external hard drive with Windows computer.

    Step 2: Press Windows;and R;on the keyboard simultaneously to get the following picture. ;And then input diskmgmt.msc;and then click OK.

    Step 3: Get the interface of Disk Management and select the partition on the external hard drive you want to format.

    Step 4: Right-click the partition on the disk and then click;Format.

    Note:

    Step 5: Select File System FAT32 in the new pop-up window for the external hard drive and click OK.

    More articles

    Popular Articles