How To Connect Ps4 Controller To Pc Steam

Using A Ps4 Controller In Steam

Thanks to official Steam support, theres almost no setup involved in getting your PS4 controller working in Steam. Just be sure to pair or plug in your controller before opening Steam or any Steam games, otherwise your controller may not be recognized.

If you run into any connection issues, closing and reopening Steam should do the trick. Otherwise, try using a USB 2.0 port instead of a USB 3.0 port. DualShock 4s are weird like that.

Once connected, navigate to Steams settings menuunder the top left dropdownto get everything running smoothly. Under the Controller tab, open General Controller Settings you should see your controller listed under Detected Controllers. From here you can register it to your account, so it will remember the settings on any PC you log into.

Back in the Controller tab of the Settings menu, you can configure your controller for Big Picture and Desktop usage, as well, and even set up Guide Button Chord Configuration.

How To Connect An Xbox 360 Controller To A Pc

In case youre wondering how to connect an Xbox 360 controller to your PC, follow these steps:

Step 1: Plug the controller into the port labeled XBOX360 on the back of the console.

Step 2: Open Windows Explorer

Step 3: Navigate to C:\Users\ \AppData\Local\Microsoft\Xbox Live

Step 4: Look for a folder named xboxlive. It may look something like this:

Step 5: Copy all files inside the folder xboxlive to your desktop, leaving only one file, xboxlive.xml.

Step 7: At the command prompt, type:< path\filename> This will extract the contents of the xboxlive folder onto your desktop.

Step 8: Launch the exe file you copied and run through the instructions.

Step 9: Enjoy!

How To Connect Ps4 Controller To Pc With Bluetooth

If your PC supports Bluetooth, you can pair and connect your controller wirelessly.

1. Open your PC’s search menu and search for Bluetooth.

2. Select Bluetooth and other devices settings in the search results.

3. Make sure your computer has Bluetooth enabled by setting the switch labeled Bluetooth to On.

4. Hold down the Playstation and on your controller until the backlight starts flashing.

5. On your PC, click Add Bluetooth or other device, and select Bluetooth.

6. You’ll see your PS4 controller listed as Wireless Controller. Click it to finalize the connection. If you’re asked for a passcode, enter 0000.

Recommended Reading: Where To Buy Playstation 5

Connect Ps4 Controller To Pc Via Bluetooth

Its always easy to use a wireless connection instead of a wired one. This can give you more flexibility while gaming. Besides, wire cables tend to create more confusion.

Did you know?You can play PSP Games on Android.

Todays laptops feature a built-in Bluetooth connection. But, if your PC doesnt support Bluetooth, you can use an external Bluetooth adapter for pairing the gamepad controller.

We highly recommend you go for Sony DualShock 4 USB Wireless Adaptor, the official Sony PlayStation Bluetooth adapter that is compatible with the PS4 gamepad controller.

Steps to connect PS4 controller to PC using Bluetooth

For the first-time connection, ensure to enable the pairing mode.

Note: The steps to pair via Bluetooth are different for Windows 10/11 and Windows 7. Weve mentioned below steps on how to pair your controller on both operating systems.

For Windows 10/11

For Windows 7 or below

How To Connect A Ps4 Dualshock 4 Controller To A Pc

The PlayStation 4’s DualShock 4 controller is a fantastic gamepad, and with some tinkering you can get it to work with your PC.

Ive been PCMags home entertainment expert for over 10 years, covering both TVs and everything you might want to connect to them. Ive reviewed more than a thousand different consumer electronics products including headphones, speakers, TVs, and every major game system and VR headset of the last decade. Im an ISF-certified TV calibrator and a THX-certified home theater professional, and Im here to help you understand 4K, HDR, Dolby Vision, Dolby Atmos, and even 8K .

You May Like: How To Change Your Password On Ps4

How To Connect Ps4 Controller To Windows 10

Below we offer you three different solutions for connect the PS4 DualShock 4 to a PC to play video games the first of them will be in Windows 10, the most direct method. To do this we just have to connect the control pad to our PC via the same USB cable provided with the command once connected we will hear the typical Windows sound that warns us of a new connected device along with the corresponding notification in the operating systems task bar.

Shortly after, another notification will appear that will allow us to configure the command, identified in this case as Wireless Controller. The bad news is that through this method we cant map the buttons and it will offer us a basic configuration that may not be useful for all video games.

Nfs Unbound Controller Not Working On Pc Fix

Home » Guides » NFS Unbound Controller Not Working on PC Fix

If you are having controller issues in Need for Speed Unbound on PC, you should know that you are far from being the only one. NFS Unbound had an early access launch on Tuesday, and since then, many players have reported various controller problems. From the controller not registering in NFS Unbound to buttons not working as they should, there are quite a few annoying problems. Read on as we explain how to fix the NFS Unbound Controller Not Working on PC issue.

Also Check: How To Make Playstation 3 Account

Fix 3 Check For Bluetooth Signal Interference

Sometimes other devices using Bluetooth works against your wireless setup. make sure that you turn off all other devices within the range of your PC or DualShock 4 controller.

Turning off other controller software fixes the steam wont recognize PS4 issue.

• Go into Steam > BPM > Controllers and un-tick every single box.
• Full exit BPM and then Steam Client and Relaunch it.
• Repeat the process but tick just the PS4 controller box.
• If this alone doesnt do it, try the Generic box as well.
• Exit out BPM and relaunch Steam Client again.

Also, check the DS4 Controller in Windows 10. Type Win key+ R, type joy.cpl, and click OK. Check that Axis, Triggers, Buttons, are all working in it.

Unplug Mouse/keyboard Or Other Peripherals

You should also unplug all the external peripherals from your PC, such as the keyboard, mouse, printer, USB drives, and more. Then, reconnect the necessary USB devices to the PC to check for the issue. If the problem gets fixed, that means there is an issue with the USB device or your PC system had some glitch earlier.

Don’t Miss: What Time Does Playstation Live Chat Close

How To Connect The Ps4 Controller To Steam

If we want set up the DualShock 4 on Steam We can configure its buttons without any problem, since the PS4 controller is compatible with Valves video game platform natively. To do this, we just have to connect the remote via USB and access Steam Big Picture via the command-shaped icon at the top right of the Steam top menu.

Can I Use My Ps4 Controller To Navigate Around Steam

Yes. Your PS4 controller can not only be used to play games it can also be used to navigate around the Steam platform. Heres how to do so:

1. With Steam open, go to the upper-right-hand corner and select the big-screen icon.

2. Choose the settings icon from the top left-hand corner.

3. Go to Controller and then Big Picture Configuration.

4. From this screen, you can configure navigating Steam.

Read Also: How To Change Psn Profile Picture Ps4

How To Fix Nfs: Unbound Controller Not Working On Pc

Need for Speed Unbound is the latest entry in the long-running NFS franchise that has released a series of racing games that many consider being some of the best ever in the video game genre. NFS Heat is highly regarded as the best NFS game, leaving Unbound with a lot to live up to if it plans on surpassing the success of Heat.

NFS Unbound is currently available to play for players who pre-ordered the Palace Edition or have an active EA Play Pro subscription. And although the game is running well, some players have reported having controller issues. So in this article, well be guiding you on how to fix NFS: Unbound controller not working on PC.

How To Personalize Your Controller With Ds4windows

Now that you have your PS4 controller connected, you can also personalize your controller depending on your preferences. All you have to do is head over to the Profiles tab in the DS4Windows application.

Unlike personalizing your PS4 controller on Steam, you can do a whole lot customization with DS4Windows application, such as:

• Naming your controller

Read Also: How To Connect Ps4 Controller To Switch Without Adapter

Reasons Why Steam Not Detecting Ps4 Controller

The reasons may vary as to why the steam client is not detecting your PS4 controller. However, the most common causes are:

• Steam client glitch: Due to improper controller setup a glitch may occur.
• PS4 controller malfunction: Be it a controller connected via USB cable or Bluetooth a fault may arise in such devices.
• Outdated computer drivers: The outdated drivers required for USB ports or Bluetooth dongles if get corrupted can cause problems.
• Windows Bugs: Sometimes the operating system gets corrupted so make sure that it is a fully updated OS.
• Bluetooth signal interference: If you connect a PS4 controller to your PC via Bluetooth and Steam is not detecting it then it is because some other devices using Bluetooth are interfering. Make sure that no other bluetooth device is working around the PS4 controller.

How To Connect Ps4 Controller To Pc

I find the PlayStation controller easier than a mouse and keyboard for gaming. Yes, I agree that many PC games, especially first-person shooter games, work best with a mouse and keyboard. However, holding that DualShock PS4 controller and relaxing on my couch while playing Devil May Cry 5 is always the best feeling. Did you ever connect the PS4 controller to Windows and play those PC games?

Many people think that the PS4 controller is only designed precisely for Sony PlayStation 4 console. But the truth is you can easily use your gamepad controller to play PC games. Besides, it is pretty easy to set up, and you dont need any advanced computer skills either. Trust me youll be more comfortable playing games using a controller. Just follow the simple steps below, and youll be able to connect your PS4 controller to play PC games.

You May Like: Can Playstation Play With Xbox

How To Connect Ps4 Controller To Ps4

Syncing a PlayStation 4 DualShock controller to a PS4 is extremely easy, but it does require one piece of hardware: A USB to Micro-B cable. Theres no wireless workaround for pairing controllers via Bluetooth, so to sync new controllers with your PS4, youll need a cable. Your DualShock 4 controller comes with one cable, but any USB 2.0 to Micro-B cable will work.

How To Fix Controller Not Working In Need For Speed Unbound On Pc

The NFS Unbound controller not registering on PC issue is mainly related to the fact that the game doesnt have good native PC controller support. For some players, their controllers would function normally and then suddenly stop. For others, buttons would stop doing what they should and instead do something else. It seems that this issue mostly appears for those players who play the game via the Epic Games Store or EA Play . In this case, many players advise configuring your controller in Steam. Even if you dont own the game on Steam, you can add it as a non-steam game to your library. And then head to Steam Settings Controller General Controller Settings. There you can configure your controller.

If this doesnt work for you, theres a reverse solution. Some players report that if you dont own NFS Unbound on Steam, you should turn off Steam while playing the game on other platforms. Thats because Steam may recognize your controller and load different controller settings, which could mess with your in-game settings. Thus, if you turn off Steam while playing on Epic Games/Origin, you could potentially fix the NFS Unbound Controller Not Working issue. Furthermore, some players report that using a cable connection instead of Bluetooth has fixed their problem.

Recommended Reading: How To Disconnect Ps4 Controller

How To Connect Through Steam

• Plug the micro USB into your connector into your DUALSHOCK.
• Then, plug the USB-A into your PC .
• On your PC, launch Steam.
• Log into your account.
• From your Steam homepage, .
• In Big Picture Mode,
• Once in your Settings, scroll to “Controller Settings” .
• Inside “Controller Settings,”check the “PlayStation Configuration Support” box.
• If your controller is plugged in, checking the box will cause Steam to detect your controller. “PlayStation 4 Controller” will appear at the bottom of the Settings options. Scroll down and select your controller beneath “Detected Controllers:”

From this menu, you’ll also be able to customize the amount of time your PC will leave your controller on if you’ve left your game idle. The default is 15 minutes.

Connecting your DUALSHOCK to your PC via Bluetooth is pretty straightforward with Steam.

Uncheck Controller In Steam Controller Settings

Sometimes unchecking the controller options in Steam Controller Settings may fix the gamepad not detecting or not working issue.

• Launch the Steam client on the PC.
• Now, go to Controller > Click on General Controller Settings.
• Make sure to uncheck all the controller configuration support from the list.
• Restart the Steam client and try running Need for Speed Unbound game again.

You May Like: How To Make Japanese Psn Account Ps4

How To Navigate Steam With A Ps4 Controller

In addition to playing games, you can use your PS4 controller to navigate the Steam platform. For example, you can use the joysticks as a mouse and even enable the controller’s trackpad.

Fix 2 Reset Ps4 Dualshock Controller

Sometimes Steam wont recognize the PS4 controller but when plugged in it shows the device. In that case, you may try to reset the controller. Heres how:

Read Also: How To Take Ps4 Controller Apart

How To Set Up A Ps4 Controller In Steam

On November 1, 2016, in a Steam Client Beta patch, Valve announced the addition of Steam Configurator support for the PS4s DualShock 4 Controller on PC. This went live a little over a month later on December 14 of the same year, as confirmed by a new Steam Client Update announcement.

To use your PS4 DualShock 4 controller in Steam, you need to have the following:

• A PS4 Dual Shock 4 controller
• Micro USB charging cable
• The latest Steam version

Its important to emphasize that this only lets you use your controller on Steam and inside of titles in your Steam library . If you want to use your controller outside of Steam titles, then you will need to skip down to our How To Get A PS4 Controller To Work On PC section.

IMPORTANT: Dont plug your PS4 controller to your computer just yet.

Fix : Reconnect The Controller

Unplugging and re-plugging the cable you use for your PS4 controller is one of the easiest fixes for the Steam Not Detecting PS4 Controller problem.

This solution takes the least of your time, and if it ends up working, you save a lot of time, so why not give it a try as a start?

Take the cable out of the controller, wait about ten seconds, and then plug it in once more. Try using some of its functions as a test.

You can also repeat this process one or two more times, but if it doesnt work, simply move on to the other solutions below.

Read Also: How Do I Connect To Playstation Network

Connect Via Ds4 Windows Utility

If you want to use your wired controller with a non-Steam game, this is another option.

1. In a web browser on your PC, go to the DS4 Windows website. Click .

2. You’ll be redirected to Github. Find and click the DS4Windows.zip file, then download it onto your computer.

3. Find the downloaded .zip file on your computer and open it, then double-click DS4Updater and click Extract All.

4. Pick a location for the files to be extracted to. It should be a location that you can find easily.

5. Once extracted, open the location you picked and double-click DS4Windows. If you’re asked to confirm that you want to run the program, click Run.

6. You’ll be asked where you want to save the program’s files. If you don’t care where they go, pick Appdata. If you want to be able to move them around, pick Program Folder and select a location.

7. Once you’ve picked a spot to save the files, click Step 1: Install the DS4 Driver and let the program install its files. If you’re asked whether you’d like to install the software, click Install.

You can now use the PS4 controller on your PC with a micro-USB cable, although you may need to restart your computer first.