Monday, November 28, 2022

How To Start Ps4 In Safe Mode

Don't Miss

Section 4 Of : How To Boot Into Safe Mode

Cannot Start the PS4 – Safe Mode Loop – How to Fix
  • 1Turn off your PS4. If you are not able to turn off your PS4 using the power menu in normal mode, you can turn off your PS4 by pressing the Power button on the front panel of the PS4 on the left side below the disk drive. Wait for it to power down and turn off.
  • 2Press and hold the Power button until you hear two beeps. You will hear the first beep when start pressing the power button on your PS4. Continue holding the Power button until you hear another beep about 7 seconds later. This indicates that your PS4 will boot into Safe Mode.
  • 3Connect the controller using a USB connection. Bluetooth functionally is not available in Safe Mode. You will need to connect your controller using the USB cable you use to charge your controller. Connect a USB cable to one of the USB ports on the front of the PS4 console.
  • How To Boot Your Ps4 Into Safe Mode

  • Turn off the console using the power button located on the front. When the white lights on the console finish flashing it will be completely off.
  • Once your console is turned off, press the power button until you hear the second beep. This will appear seven seconds after the usual start-up beep is emitted.
  • Connect the DualShock 4 controller to the console using a USB data cable and press the PS button.
  • The safe mode menu will appear on the screen.
  • See also:

    Why Should I Use Safe Mode:

    Safe Mode is mostly used by gamers when they are facing some problems with their games. It can be if the games not launching, if the game keeps on freezing, if the PS4 randomly stops working, there are numerous reasons why you should use this feature. In conclusion, if youre facing issues with your PS4 try booting it with safe mode it should fix your problems.

    Recommended Reading: When Will Servers Come To Ps4 Minecraft

    Why Won’t My Ps4 Turn On

    When a PS4 won’t turn on, the cause can be a hardware, software, corrupt software or firmware or power issue. Hardware issues, like bad power supplies and broken power buttons, are best left to the professionals. Software and power issues are often much easier to fix, so there’s a good chance you’ll be able to get your PS4 up and running without an expensive repair bill.

    When software issues prevent a PS4 from turning on, it’s usually cased by an incomplete system update, corrupt files, or even a bad hard drive. These are all easy enough to troubleshoot, and your PS4 comes with a built-in safe mode that you can use to perform a lot of fixes.

    Power issues are also fairly easy to identify and fix most of the time. You may have a problem with your power cable, power strip, surge protector, or even outlet. By carefully trying different combinations, you can safely identify the source of this type of problem and then rectify it.

    How To Start Ps4 In Safe Mode And How To Get It Out Of It

    How To Start Ps4 Out Of Safe Mode

    The PS4 is an amazing console but just like everything tech, it can have its issues from time to time. Now while Sony has done a brilliant job with its interface helping people solve common issues from the console itself, some times thats just not enough.

    Almost every gadget out in the world has some sort of safe mode. This mode is there to help diagnose issues with the device not starting up and sure enough, its there in the PS4 as well.

    In this article, were going over how you can boot your console into its safe mode. Then once youre done, were also going to touch on how you get out of it and boot into the regular console menu.

    Also read: How to lower the ping on PS4?

    You May Like: Is Ncaa 14 On Ps4

    How To Enter Safe Mode On Your Playstation 4

    You can boot your PS4 in Safe Mode using a button on the console itself.

    To do that, first, power off your PS4. You can do this by holding down the Power button on the console for three seconds. When your PS4s light stops blinking, the console has fully turned off.

    After powering down the PS4, press and hold down the Power button on it for about eight seconds. Let go of the Power button when the console makes the second beep .

    Connect your controller to your PS4 using a USB cable as you cant use the wireless mode when in safe mode. On your PS4-connected screen, you now see various options.

    Heres what each option does:

    Once youve finished your tasks, reboot your PS4 in normal mode using the Restart PS4 option.

    And thats all there is to booting your PS4 in safe mode and using various options in it. Enjoy!

    If you have issues with your controller, you can reset your PS4 controller to potentially fix the issues with it.

    What Is Ps4 Safe Mode

    When you start your PS4 console in safe mode, itll be performing only the most basic functions necessary in order to run the system. There are some features available when you boot your console in safe mode that you can use in order to troubleshoot the system.

    When you start your PS4 in safe mode youll want to make sure your USB ports are working, because youll have to connect to your controller through a USB port in order to operate the PS4. Then, you can choose from multiple options that may help you fix issues.

    Restart PS5: This option is pretty straightforward. It will restart the console normally and exit safe mode.

    Change Resolution: This allows you to change the video resolution output for the PS4 display.

    Update System Software: Allows you to update the PS4 system software either through a direct download or from a USB stick.

    Restore Default Settings: This will set the PS4 to the factory settings, meaning all data on the console will be wiped. If you choose this, make sure to do a backup beforehand.

    Rebuild Database: The PS4 will scan the drive and rebuild the database of the content on the system.

    Initialize PS4: This will delete all your data and restart the PS4 to its original state.

    Initialize PS4 : All data will be deleted and the PS4 firmware will be removed.

    You May Like: How To Turn On Cheats Sims 4 Ps4

    Power Down Your Ps4 And Check The Cables

    One of the most common reasons for a PS4 console getting stuck in safe mode is due to damaged, loose, or disconnected cables. If your PS4 console isnt already turned off and youre stuck on the safe mode screen, use the physical power button on the console to force it to shut down. To do this, press and hold the PS4 power button for at least 7 seconds.

    Once the console is shut down, youll need to inspect all cables. Youll need to check both the power cable that runs from your wall outlet to your PS4 console as well as the HDMI cable that connects the PS4 to your screen. Look to see if these cables are frayed, pinched, or exposed.

    If they are, this could be causing your PS4 to get stuck in safe mode, as electrical issues with your cords can cause intermittent power flow to the console. Keep in mind that power spikes can cause cables to heat up drastically, leading to extensive heat damage to internal components within the console.If you have faulty cables, replace them right away.

    How Ps4 Safe Mode Works

    How to Start PS4 in Safe Mode

    Once your PS4 has booted in Safe Mode, youll see a few options:

    • Restart makes your PS4 boot normally ,
    • Change Resolution forces your PS4 to boot up in 480p next time around.
    • Update System Software updates your firmware via a USB drive, the internet, or a disc.
    • Restore Default puts your PS4 back to its factory settings yet keeps your data.
    • Rebuild Database scans the drive and essentially re-indexes its contents.
    • Initialize PS4 wipes ALL of your data from the console and essentially rolls it back to the day you took it out of the box.

    Safe Mode is beneficial if your device has an issue during an update. Rebooting your PS4 in Safe Mode should allow you to proceed, but it doesnt always work that way.

    Recommended Reading: How To Customize Ps4 Controller

    How To Put Ps4 Into The Safe Mode:

    The Safe Mode might sound not that familiar to you though, its easy to start your PS4 system to its Safe Mode. Just go on with these simple steps:

    1) If your PS4 system is on, please turn it off: press the Power button on the front panel of your console.

    2) After your PS4 system is off, press and hold the Power button. Once you hear its second beep release the button: When you press it you will hear the first beep and after around 7 seconds you will hear the second one.

    You should then see a message on your screen saying Connect DUALSHOCK 4 using the USB cable and then press the PS button.

    3) As the instruction says, please connect your DualShock 4 by USB cable with the console.

    4) Press the PS button on your controller.

    5) You should then see the Safe Mode menu screen.

    Were going to show you what each Safe Mode option does for you.

    Send Your Console For Repairs

    The warranty on your PlayStation 4 might cover repairs or replacements for your console. Experts will be able to look at the issues and hopefully fix them without your data being compromised. Most experts offer an option to have all of your data transferred before the repairs start. Make sure you ask about it when you take it in!

    Read Also: How Do I Make My Playstation Controller Vibrate

    Use Menu Options To Get Out Of Safe Mode

  • Connect your controller to your PlayStation’s USB port.
  • Select the first menu option. It is labeled Restart PS4.
  • Wait for the PlayStation 4 to reboot.
  • If your PlayStation boots back into Safe Mode after following these steps, you’ll need to continue further down this article to test another repair option.
  • “Restart PS4” looks like it might reset your console’s memory, but I promise it won’t. Using this option will shut down your PlayStation and attempt to start it in the normal boot-up mode. If your PlayStation boots back into safe mode with this option, your console is still experiencing issues.

    What Is Playstation 4s Safe Mode

    How To Start Ps4 In Safe Mode Without Power Button

    PlayStation 4s Safe Mode loads your system only using the bare essential files. This allows the console to isolate problematic files so you can resolve your errors. In this mode, you can rebuild your system database, manually install software updates, and even reset your console. Note that wireless functions do not work in safe mode, so youll need to have a USB cord handy to use your controller.

    When youve finished your tasks, you can exit Safe Mode and reboot your PS4 in normal mode.

    Also Check: How To Report On Ps4

    Check Your Power Cord Cable

    If your power cord is broken or isn’t plugged in properly, it could be another reason you’re experiencing issues with your PlayStation 4.

  • Turn off your PlayStation 4 safely by holding the power button or using the menu options.
  • Unplug your power cord from the back of your PlayStation 4.
  • Unplug your power cord from the wall outlet.
  • Leave your PlayStation 4 unplugged for 20 minutes.
  • Securely plug your power cord back into the PlayStation 4 and wall outlet.
  • If you are still booting in Safe Mode restart these steps, but use a different outlet next time.
  • Power cords for the PlayStation 4 Pro and the PlayStation 4, and the PlayStation Slim are less than $10 each on Amazon. If you’re not trying to spend any money on repairs, attempt the next few options before making your order. If you’re still experiencing issues after testing everything, your last option is to replace your power cords and HDMI cables.

    Update Your Ps4’s Software

    Try updating your PS4’s system software from the Safe Mode menu.

    Press “X” to select elect option 3 on the menu, “Update System Software.” Then, press “X” to select “Update Using Internet.” From there, follow the instructions on the screen.

    If nothing else works, select option 7, “Initialize PS4 ,” and press “X.” Follow the instructions on the screen.

    Read Also: Will Ps5 Play Ps4 Games

    Try Restoring The Ps4 To Default Settings

    Another option from the safe mode menu is to restore the PS4 to its original or default settings. You can do this without worrying about losing your user data, games, or applications.You can get out of the PS4 safe mode loop by doing this if the console is stuck due to a user setting or a loss of vital XMB files after a power outage. To restore to default:

  • Choose the restore to default settings from the safe mode menu.
  • Follow the on-screen instructions.
  • You will be asked to reset a few different console settings, including the time zone.
  • How To Boot Ps4 And Ps5 In Safe Mode

    How to Start PS4 In Safe Mode and Fix Many PS4 Problems! (Easy Method)

    The steps are the same for both the PlayStation 4 and the PlayStation 5. Likewise, the instructions are the same for either version, like the PS4 Slim or the PS5 Digital.

    Heres how to boot PS4 and PS5 in Safe Mode:

  • Hold the power button for three seconds to power off the console. The power indicator will blink a couple of times before turning off.
  • When the console is off, press and hold the power button again. Hold it for about seven seconds until you hear the second beep. The first beep sounds immediately the second one sounds seven seconds later.
  • Connect the controller via its USB cable
  • Press the PS button on your controller.
  • By now, you should be on the Safe Mode menu.
  • Don’t Miss: Can You Connect Ps4 Controller To Pc

    # 4 Rebuild Ps4 Database

    As mentioned above, the Safe Mode loop PS4 issue is related to a corrupted database. Rebuilding the database can scan the hard drives in your console and clear the corrupted file, and help free up space. Here you can try rebuilding the PS4 database and see if it works. To do so, you just need to select Rebuild Database in the Safe Mode menu.

    What Is The Ps4 Safe Mode Function

    Safe mode on PS4 is a diagnostic tool that you can use to change various settings on your PS4 console, as well as troubleshoot and fix various issues that may arise from time to time. By booting into safe mode on your PS4, you can do the following:

    • Restart your system to end safe mode.
    • Change the display resolution to 480p for troubleshooting purposes.
    • Update the system software via USB, disc, or direct download.
    • Restore the PS4 to default settings.
    • Rebuild the PS4s storage database.
    • Initialize the PS4 into its original state .
    • Reinstall the system software .

    There is an additional option you get if you are on a PS4 Pro console model, which is to set HDCP mode for 4K televisions.

    Read Also: How To Add Another Account On Ps4

    Ps4 Has Display Or Resolution Issues

    Some PS4 units may get stuck in a black screen when the system cant automatically detect the resolution of the TV connected to it. This usually happens when a PS4 is connected to older TV model that has a lower screen resolution.

    If you are in this situation, you can restart your PS4 in safe mode and select Option 2 to fix the problem.

    What If I Am Still Stuck In Safe Mode With Error E

    کاربرد ØاÙت SAFE MODE در PS4

    If youre dealing with a PS4 stuck in safe mode and it is accompanied by the error code E-8200028, then your PS4 safe mode loop is due to an insufficient funds issue.

    What happens with this error code is you end up with a PS4 safe mode loop within a loop, where your PS4 boots up into safe mode but cannot restart and boot normally, as the error code forces you to shut down the PS4 due to an attached card that has insufficient funds.

    The solution for the E-8200002E error is to remove your current payment method and then restart your PS4 console. To remove your payment information, sign in to your PlayStation account on the official PlayStation website here.

    Read Also: How To Turn On Footsteps On Fortnite Ps4

    Make Sure There Are No Power Issues

    If the first method fails, check to make sure all of the cables, including your USB and HDMI connections, are working properly.

    You can also try unplugging your PS4’s power cord and plugging it back in. Also, unplug the HDMI cord and switch which end is plugged into the TV and which end is plugged into the PS4.

    If one of the cables or connections is broken or failing, try replacing it.

    If the cables and connections are working fine, try power cycling your PS4, as explained in our article on troubleshooting a PS4 that won’t turn on.

    How To Put Ps4 In Safe Mode

    You can follow this guide to start your PS4 in Safe mode:

  • Turn off your PS4 console. If you cant use the universal method to do this, you can press and hold the Power button for about 3 seconds until the device is powered off. You can see the power indicator blinks for a few moments before the device is turned off.
  • Press and hold the Power button for about 7 seconds. When you hear the second beep sound, you can release the button.
  • You can see that your PS4 enters Safe mode. Here, you need to make sure the controller is connected to the console and press the PS button on the console.
  • You May Like: Can You Play Portal 2 On Ps4

    More articles

    Popular Articles

    How To Take Apart A Ps4