How To Reassemble Your Fat Ps3
wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 11,919 times.Learn more…
Most of the time it’s easy taking something apart but trying to put it back together can be a struggle. If you’ve taken apart your fat PlayStation 3 to try to fix the yellow light of death or replace the battery, you now need to reassemble it. The steps can be performed by beginners, intermediate, and expert users.
How Do I Keep My Ps3 Alive
Theres a few things you can do.
Playstation 3 Yellow Light Of Death Repair
When it comes to the infamous Yellow Light of Death, dont take chances by going to an inexperienced technician. This problem equivalent to the often requires board level repairs, as it is most commonly caused by motherboard issues. Our technicians have training and experience fixing hardware issues like this on PS3 consoles, so you can depend on us to diagnose the issue quickly, and get your console back up and running.
Read Also: How To Clear Cache Ps4
How To Disassemble A Ps3 Fat To Clean
wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 13 people, some anonymous, worked to edit and improve it over time. This article has been viewed 495,497 times.Learn more…
Is your old PlayStation 3 starting to get loud or slow? It may be suffering from a buildup of dust after years of use. If you want to protect your PlayStation, you may want to take a stab at cleaning out the insides. This can be a daunting task, as the PlayStation 3 is carefully constructed, but with a little preparation you can take a lot of the stress out. See Step 1 below to get started.
How To Fully Take Apart A Fat Ps3
The Fat or Phat PS3 was the first model of Playstation 3 that was released. This system is the most dust-prone of all PS3 models and if you want to keep this system from getting the YLOD you should make sure that it is free of dust. If you are looking to clean the dust from your PS3 or have some other reason to take it apart, this video guide will show you how to fully take apart a fat PS3.
Due to the design of this PS3, you need to be extra careful when taking it apart. If you are too rough you can end up causing the YLOD. This model of PS3 has a lot of weak solders that have the potential to break away from the motherboard. This is what causes the YLOD. If you are too rough when taking apart the layers of this system you can end up breaking these solders so it is very important you take it slow and be gentle.
You should use a cloth that is 1 solid color to keep all of your screws on as you take the system apart. This way you can keep track of them all and prevent them from rolling ooff the desk that you are working on.
Also Check: How To Use Ps4 Controller On Dolphin
Help And Support For Your Playstation Products
Website ©2021 Sony Interactive Entertainment Europe. All content, game titles, trade names and/or trade dress, trademarks, artwork and associated imagery are trademarks and/or copyright material of their respective owners. All rights reserved. More info.
How Much Will It Cost
When youre in need of PlayStation 3 repair services that wont break the bank, depend on the professionals at CPR! While repair costs vary based on the type and extent of damage to your PlayStation 3, our repairs are always budget-friendly. For a free estimate on your PlayStation 3 repair, call your local Cell Phone Repair store!
Read Also: How To Stream To Facebook From Ps4
How To Disassemble A Dual Shock 3 Controller
wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 37,023 times.
This guide shows the steps for taking apart a Dual Shock 3 controller for the Playstation 3. It focuses on four main components: the battery, buttons, vibration motors, and logic board. This makes replacing each components easier.
This Video Shows Playstation 3 Slim Power Supply Replacement
All necessary steps presented here in this video guide. From this video you will learn how to replace the power supply module in your game console.
This information is provided for informational purposes only. We accept no liability for damage caused to your device while following the video instructions. Also note that if your laptop or any other device is still under warranty period, then in the process of dismantling the guarantee may be canceled because traces remain after disassembly and it violates the terms of the warranty period. Before disassembling, make sure that the warranty on your laptop has been over.
Read Also: How To Use A Ps4 Controller On Project 64
How To: Open And Tear
Break Down a PS3 Console to Motherboard Tutorial
What Tools Are Need:
- Small Flat Head Screw Driver
- Regular Philips Screw Driver
- Remove the screw from the side of the console and the warranty sticker. This is done with the small flat head screwdriver.
- Then slide the lid of the top of the console
- Remove 7 Screws from top of console shell, and then pull upward.
- With enough force the shell of the console pops loose.
Removing the internal Components:
- Remove the Disc Drive remove two ribbon cables and a small connector cable.
- Remove the Card Reader remove the two screws holding this down.
- Remove the Wi-Fi Board remove the antenna cable, four screws and the ribbon cable.
- Remove the Power Supply remove five regular screws, and the ground screw. Then un-plug the two connectors
- Remove the Antenna there is only one small screw for this.
- Remove the Eject Board this is the small board just in front of the disc-drive. Remove the four screws holding this down.
- Take the Hard Drive Out remove the black plastic door, and remove one screw with your small Philips screwdriver.
Keep in mind the above-mentioned items use smaller screws this will help when you put the console back together.
- Remove all the screws surrounding the Board two of the screws will require the use of the small Philips screwdriver. It also depends on the model of the console.
- Then take out the four screws in the middle of the board, holding the gpu & cpu in place.
How To Take Apart A Slim Ps3
There are 3 different models of Playstation 3 consoles. This video guide will show you how to fully take apart the Slim PS3 model, which was the second Playstation 3 console that was released. If you are looking to clean the dust out of your Playstation 3 without causing damage, follow this video guide to take apart a Slim PS3.
When taking apart this system, keep all screws on a cloth or some other light and plain colored cloth that will not only stop them from rolling, but also stop you from losing. A lot of the screws that keep the PS3 together are very long. Although it might feel like there is nothing left on the thread to screw, do not pull the console apart. Wait until you feel the screw is loose before pulling to avoid damage to your system.
Don’t Miss: Share Ps Plus On Two Ps4
How To Take Apart A Dualshock 3
Taking apart a Dualshock 3 is relatively simple, but putting it back together is not to simple. If you have a broken button or have smashed the controller off the ground in anger and need to repair it. This guide will show you how to take apart a Dualshock 3 controller in order to repair any damage or replace broken components.
The components inside the Dualshock 3 are quite tough, it is difficult to break it by being too rough, but it is possible to break the plastic components that hold the screws and keep the controller together. If you are too rough when taking apart the screws you could break the screw holes. This will not break the controller, but it makes it very uncomfortable to hold.
Take your time taking this apart and keep all of the pieces on a white piece of cloth so you do not lose them. There are 2 springs behind the L2 and R2 trigger buttons. These fall off when you are taking the controller apart and are very easy to lose. The trigger buttons do not work correctly when these springs are missing so be very careful not to drop them.
Stopped Taking Disks Into Itself How Can I Repair
I received a PS3 that was not reading disks and followed the instructions that I found on youtube.com to dismantle it, but my model seemed a little different, after putting it back together it would not take disks, it won’t even pull them in. What might I have missed?
by Day Boi
Mine was weird, I was playing it and all of a sudden I froze in a game. I turned the system off and back on and found that I was not able to see the disk in the system anymore. Almost like a modder had shut my system down on me without my knowledge. I have heard of this happening to other people in the past however I have never experienced it myself. I am unable to reload a disk into my system and also I am unable to get on youtube, HULU, or Netflix. Each time I try i get sent to the black screen and then nothing else happens. Have to restart the system again. I am able to talk to friends with messages but other than that its just a black brick taking up space. How do I fix this problem.
Recommended Reading: Project 64 Xbox 360 Controller Profile Download
How To Open Ps3 How To Disassemble Ps3 Fat Step
In this article, we will look at Sony PlayStation 3 Fat disassembly features– the very first version of the console. If you know how to handle equipment and you are sure that there is a reason for cleaning or repairing, we will tell you everything you need to know.
Without further ado about what you you need to be extremely careful and concentrate on work, we proceed to the question of how to disassemble the PS3 Fat.
First, let’s briefly go through the list of tools that you need to prepare for disassembling the PS3 Fat:
- Phillips # 1 screwdriver
- Spudger .
repair PlayStation 3