How To Open Your Ps4

Cleaning The Inside Of Ps4

Start by powering off your PS4 and unplugging any attached cords, as described earlier.

Before removing the case to delve into those sensitive PS4s components, youll want to ground yourself by touching a metal surface. Grounding means to negate electrostatic discharge that you may accidentally transfer to the PS4s parts, potentially rendering them useless. Although this is quite rare, its better to be safe in this regard.

Dismantling the PS4

Its worth noting that cleaning your PS4 thoroughly will require you to remove pieces of the hardware and take the console apart. This may void your warranty, so only attempt this if youve had your console for a while and are no longer under warranty.

Taking apart the PS4 isnt really as difficult or daunting as it sounds, but even still, youll want to carefully follow the instructions and make sure youre keeping all the various screws and pieces in a safe place. Make sure your workbench is clean and that you have all the right tools you need before you start work.

Rather than explain how to do this in writing, its much easier to follow a video taking you through the step-by-step process.

Cleaning Process

Now, after you have successfully dismantled the PS4, please follow the steps below to completely clean the inside of PS4.

Remove The Back Stickers And Screws

Now that you’ve got your PS4 ready to work, turn it around so the back is facing you, then flip it upside-down. You’ll see three stickers along the “top” that you must remove.

Note that if you have the slightly revised model of the original PS4, you’ll only see one sticker and screw here in the middle.

The middle one has a special warranty sticker that damages itself when you remove it. The other two are a bit thicker and might require a bit of extra work to peel off. Use your knife or another pointed tool to peel back a corner of the stickers, then they should come off easily. Be careful not to scratch your system while you remove them.

Set them aside if you want to re-apply them later, or throw them out if you don’t care. Once you’ve removed the stickers, use your TR9 screwdriver to remove the screws underneath. They’re short, so they shouldn’t require much effort. Take care not to strip them, and set them aside in a safe place.

Cleaning The Outside First

To start the cleaning process, begin with the peripherals we just removed. Grab your can of compressed air and hold the trigger to release a burst of air onto an area with a lot of dust buildup.

Now, follow these simple steps to completely clean the outside of the PS4.

Also Check: How To Use A Ps4 Controller On Project 64

Now Your Ps4 Is All Clean

Now you know how to clean your PS4. You should notice it running much more quietly than it was before, especially if you’ve had the system for years. While you could clean even deeper into the system, doing so would require some potentially risky operations. It’s better to avoid damaging your system and stick to this basic cleaning.

For future maintenance, take a brush, some compressed air, or cotton swab along the outside edges of your system to remove the dust once in a while. This should help prevent dust from building up inside, so you don’t have to go through this process as often.

Some people have recommended placing plastic bottle caps or similar small objects under the four corners of your console. This lifts it off the below surface and should help with air flow. Aside from this, make sure your PS4 has room to breathe . Paired with the above cleaning process when needed, your PS4 should stay cool and quiet.

To get even more from your PS4, there are other ways to boost the performance of the system.

What Tools Can Help You Clean Your Ps4

If you want to thoroughly clean your PS4, here are some of the tools that are needed:

• TR9 Torx security bit screwdriver. This screwdriver is needed since PS4 uses T9 security screws.
• Standard Phillips-head screwdriver. Some of the screws in PS4 require this screwdriver to remove them. If you have a smaller screwdriver, it can also do the job.
• Utility knife or any sharp object. This can help to peel off the warranty stickers attached to the screws.
• Can of compressed air or canned air. This is an ideal tool to blow out the dirt and dust.
• Cotton swabs or cotton balls. This can be used to remove stubborn dirt that a can of compressed air cant get rid of.
• A clean towel or microfiber cloth. This is what youll use to wipe dust off your PS4s exterior. It can also be used as a safe place to put your screws.
• A brush or a toothbrush. You can use it to brush off the dust and dirt on the edges and the air intakes.
• Tweezer. This can be used to remove clumps of dirt from the blades of the fan.
• Flashlight. It can help check the corners for hidden dust or dirt.

Recommended Reading: How To Remove Parental Controls On Ps4

Does Ps4 Port Forwarding Help Ps4

Sony Ps4 Port forwarding allows online gaming servers to connect to your PS4 console, which is part of a local area network. Your PS4 will automatically get NAT Type 2 , which allows you to enjoy your gaming experience without any issues.

NAT type 2 is good for PS4 download and playing online games. It is similar to having DMZ enables so all the ps4 ports are open and it may lead to a security threat to your network.

How Nat Affects Gaming

Online gaming is latency-sensitive, and other functions such as voice chat require a less restrictive NAT for the best online experience. It becomes difficult to connect to other players online or for them to connect to you when you are behind a strict NAT.

Both Sony and Microsoft give you a clear indication of the NAT type in use. Game publishers detail ports that the particular game uses for communication. Ports are virtual gates that govern the entry and exit of certain types of data. Some applications may find it difficult to communicate if ports are restricted.

Read Also: How To Alley Oop In 2k21 Ps4

Reassemble The Power Supply

To reassemble the power supply, plug the connector back in. Make sure that you securely replace all the five screws, the three security screws, and the two head screws with clips.

If youre satisfied with the thorough cleaning you just gave your console, it is now time to reassemble your PS4. Its suggested you start reassembling your PS4 by putting the back cover. Press it down lightly to be sure that it is secured. Do not forget to replace all the screws back on your console as well. If you are confident enough for the time that you gave for your console to air-dry, you can now plug it and enjoy gaming without worries.

How To Connect Your Ps4 Controller

1. Turn on your console.

2. Plug the USB end of the cable for the controller into the consoles USB port, and then connect the other end to the controller. The ports are located on the front of the console and the top-center of the controller.

3. Press the PSbutton, located in the center of the controller. Youll see a light appear on the back of the controller when its properly connected.

4. Once connected, you can unplug the cable and use your controller wirelessly assuming its charged.

Also Check: Does Ps4 Have Backwards Compatibility

Problem: Damaged Dualshock 4 Analog Sticks

We like a lot of things about the DualShock 4 as a PS4 controller, but the soft rubber padding on its analog sticks can tear quite easily when playing a game that requires quick movements, like Bloodborne or Dark Souls. But just because the rubber tears, that doesnt mean you have to ditch the controller!

Putting Your Ps4 To The Dmz:

• The first thing youll need to do is check your router manual to find your routers DMZ settings, that is if you dont already know where it is.
• Then enable DMZ and there should be a box for you to enter in the IP address you wrote down from the view connection status screen in your consoles settings. Make sure to save and apply settings before exiting out of your routers settings
• Check to see if your NAT type has now changed and if the connection has improved.

Don’t Miss: When Will Scuf Have Ps5 Controllers

Bug: Playstation Network Connectivity Problems

Network connectivity problems are the most persistent complaint with the PS4 and often manifest themselves as either NW-31201-7 and WV-33899-2 errors. The PSN goes down more often than wed like, but luckily, its usually not down for long stretches. Typically, network errors can be attributed to the PSN undergoing service maintenance , and you will just have to wait it out. Outside of maintenance periods, however, there are several methods you can easily perform to get back online.

How To Enable Open Nat On Ps4/xbox/pc

The name for an unrestricted NAT when it comes to gaming varies between platforms, but they achieve the same level of NAT openness. Heres a quick rundown:

• Type 1, Type 2, Type 2 PlayStation
• Open, Moderate, Strict Xbox/PC

It turns out that its extremely difficult to get Type 1 on PlayStation, so Type 2 is what Sony recommends and what well be aiming for. For Xbox/PC, achieving an Open NAT is easy.

There are three ways to achieve Type 2/Open NAT. You can manually allow ports, put the console in DMZ mode, or enable UPnP in the router. Demilitarized allows the device to bypass the firewall and talk directly to the internet. For security reasons, we do not recommend enabling UPnP. It allows applications to use the ports without manual intervention. But it also presents a security risk because your device is exposed to external networks.

For example, if UPnP is enabled, malware can use the ports that it wants to communicate with the internet, allowing an attacker to exploit your system and by extension, other devices on the network.

You May Like: Ps4 Turn Off Recording Notification

How To Change Your Nat Type On Ps4 What Youll Need And How To Do It

Now well get into how exactly you can go about changing your NAT type on your PS4. While changing your NAT type is ultimately just one small change, it does take a few steps and will potentially require you to have your manual for your router handy. There are two main methods of changing your NAT type, because you cant unfortunately just change it directly on your console though they both follow these first few steps.

As previously explained, youre going to have to navigate your way to the page where you can see your NAT type, within your network settings on your PS4s settings. Once youve found it, jot down the IP Address on screen, the Default Gateway as youll need these numbers.

Then open a computer and type in the Default Gateway number you just noted in the search bar and hit Enter to search. Youll be prompted to sign into your router with your username and password, and after doing so be able to change your router settings to enable UPnP. This stands for Universal Plug and Play, and allows for devices to be able to discover each other.

DMZ is short for demilitarized zone, which is essentially a sort of limbo between your secured home network and the rest of the insecure Internet. Your devices will communicate with the network and other devices better than it otherwise would, but once again you are leaving yourself open to attacks, so consider this method carefully.

How To Clean A Ps4 Console

1. Power off the console and disconnect all cords and cables.

2.Blow dust off the unit with compressed air and wipe down the exterior with a dry microfiber cloth.

3. Peel off the stickers on the back and then remove the screws using your T9 screwdriver.

4. Slide off the case, then blow dust out of the exposed interior using short bursts. making sure to keep the can upright.

You May Like: How To Connect Playstation Controller To Iphone

How To Forward Port For Ps4

Now comes the part to know how to port forwarding a PS4 game. There are many ways for port forwarding on PS4 the common ways are:

• You should release the button and before switching on the router, you should wait a few minutes.

Apex Legends: Managing Your Inventory On Ps4

Managing your inventory is pretty much necessary in Apex Legends. Lets say that your teammate lacks a certain type of ammo. If you currently have some ammo to spare, you would probably want to share it. On the other hand, if your backpack is full and you come across a grenade that you want, you will need to drop something to make room for it.

Either way, you realize how beneficial and important managing your inventory is. Apex Legends developers have definitely thought about this as theyve made it quite easy for someone to drop, exchange, and store different items in their inventories.

To drop a certain item from your backpack on PS4, youll first need to press Options and open your inventory.

While the inventory screen is open, hover over the item that you wish to drop. You will notice that the prompt for dropping items will appear each time you hover over an item. The prompt will give you an option to drop the item that youve hovered over.

Press X to drop one item at a time on PS4. To drop all of them at once, youll need to press the Square button.

After youve pressed X or Square, you will notice your item appearing in front of you on the ground. Unfortunately, dropped items wont automatically transfer to your teammates inventory. An enemy player thats near you can pick up your dropped item.

If your goal is to share an item with your teammate, make sure that theyre nearby.

Don’t Miss: How To Lag Switch Ps4

Recover Lost Ps4 Hard Drive Games Via Cloud Storage

If you are a PS Plus user, then it will be very easy to recover all lost and deleted PS4 games data. The reason is the built-in autosave feature. This feature enables a user to backup games data constantly to a cloud storage. So how to do PS4 data recovery from a cloud storage? Here is the method:

• In your PS console, go to Settings at Home menu.
• Go to Application Saved Data Management.
• Here click on Saved Data in Online Storage.
• Here choose the option.

• Now browse for your saved game data and select all your required files.
• Next, click the button in the bottom right corner.
• Now just wait for downloading to finish and thats all.