Tuesday, July 9, 2024

How To Connect Ps4 Controller Without Cord

Don't Miss

How To Pair Ps4 Controller Without Cable


Even though the above method works fine when it comes to connecting controllers without USB wired use, the latest versions of Dualshock 4 controllers available in the market help users connect it to the gaming console without hustle. There is a tiny hole in the back of the controller you will find, which is enough to sync it. Like the older versions of controllers, its relatively easy to operate. Here is how you can pair the controller without cable.

  • On the backside of the controller, find the tiny hole next to the L2 button.
  • Now use a pin or anything else to poke in the hole.
  • Push that button inside for a few seconds and then release it
  • Directly connect the Dualshock controller to the USB cable, which is connected to the PS4 gaming console.
  • Now press and hold the PS button for a few seconds it will start the syncing process.

The method mentioned above of syncing controllers to gaming consoles works only for Dualshock controllers. If you are using any other gaming controllers, then it might not be working for it. While using Dualshock, you have to ensure that other nearest Bluetooth devices like your cell phone are not activated because it connects the controller through a Bluetooth connection.

There are various other gaming controllers available in the market that easily connect to the PS4. But the process of operating and syncing them will be different than any others.

How To Sync Ps4 Wired Controller To Ps4 Gaming Console

If you are using a PS4 controller with a USB cable, there is no need to worry about it because its relatively easy to sync the PS4 controller to the gaming console. Follow the steps mentioned below to do it.

  • Press the power button on the PS4 console and turn it on.
  • Plug the PS4 controller wire into the USB port of the gaming console.
  • Now press the PS button on the controller, and hold it for like 5 seconds.
  • Your wired controller will be connected.

These are some of the best solutions for knowing how to connect a PS4 controller to the console without the use of wire. Even though the above methods dont work for you, you should check whether the controller works because some hardware or technical issues might prevent it from syncing with the PS 4 console. If you have any more doubts or questions, leave a comment below, and we will be happy to resolve it.

Solution 2 How Do I Connect My Ps4 To My Laptop Using Hdmi

If you can not installRemote Play on your PC because of not having proper specifications or any other reason, then you can still connect PS4 to a laptop using HDMI. It is quite easy to connect PS4 to a laptop using HDMI via a video capture card. All you need to do is follow the given steps one by one and it will be done easily!

The requirements before you carry out the process are given as follows:

  • A Laptop
  • File sharing enabled

After collecting the above-mentioned items, you have to follow the given process:

Step 1 Enable File sharing Go to the PS4 menu and then go to the settings. Open the Internet Connection Settings and ensure that the device is connected to your internet connection.

Step 2 Connect the video capture card Use the USB port to connect the video capture card to your laptop. The card will function properly only if you install the necessary software and drivers that come along with it.

Step 3 Connect PS4 & HDMI to Video Capture Card Use the S-video connection cable to connect PS4 to the video capture card. The next thing you need to do is connect the HDMI-IN and HDMI-OUT on the capture card and the PS4 respectively.

You May Like: Minecraft How Many Bookshelves For Max Enchantment

How Do I Speed Up My Ps4

8 Ways to Boost the Performance of Your PS4

  • Make Sure You Have Enough Free Disk Space.
  • Physically Clean Your PlayStation 4.
  • Rebuild the System Database.
  • Enable Boost Mode
  • Install the Latest Game Updates.
  • Upgrade to an SSD or Faster HDD.
  • Check Individual Game Settings.
  • Improve Your PS4 Network Performance.
  • Ps4 Controller Is Charging But Not Connecting

    How to Connect PS4 Controller

    · Updated 14/05/2021

    One of the common issues PS4 users encounter with their DualShock-4 controller is that it sometimes would charge properly without any sort of problem, but, on the other hand, it wont connect to the PS4. The reasons for why the PS4 controller is charging but not connecting are somewhat ambiguous to the majority of users. Well try here to address this issue and illustrate why this would happen and how to fix it entirely.

    Read Also: How To Get Backup Codes Ps4 Without Signing In

    How To Connect Ps4 Controllerto Pc With Bluetooth

    If your PC supports Bluetooth and if it was made in the last ten years, chances are it does you can pair and connect your controller wirelessly.

    This method also works for the newer PS5 DualSense controller, although that controller might not be supported by every game.

    1. Open your PC’s search menu and search for “Bluetooth.”

    2. When “Bluetooth and other devices settings” appears in the search results, click on it.

    3. Make sure your computer has Bluetooth enabled by setting the switch labeled “Bluetooth” to “On.”

    4. Hold down the Playstation and Share buttons on your controller until the backlight starts flashing.

    5. On your PC, click “Add Bluetooth or other device,” and select “Bluetooth.”

    6. You’ll see your PS4 controller listed as “Wireless Controller.” Click it to finalize the connection. If you’re asked for a passcode, enter “0000.”

    Dave Johnson contributed to a previous version of this article.

    Install The Ds4 Driver

    Click on Step 1: Install the DS4 Driver button to install the needed PS4 drivers on your Windows 8.1 OS and later computer.

    Click on Step 2: If on Windows 7 or below, Install 360 Driver button only if you have a Windows 7 or older OS since this OS doesnt come with the 360 drivers needed to run the DS4 drivers correctly by default. Otherwise, skip it and proceed to the next step below.

    Don’t Miss: How To Dunk On 2k20 Ps4

    How To Connect A New Ps4 Controller

    Good news for all, this isnt a hard thing to do. Its as simple as getting the USB charging cable and connecting one end to the PS4, and the other to the PS4 controller.

    Thats all you have to do. Make sure you let the controller fully charge before disconnecting it and then youre free to wander about your house to test the range on it.

    If you ever have issues with your current controllers then charging them is often the answer, so always try that before you do anything else. That being said, there are fixes if things go awry too.

    READ MORE:PS5 DualSense controller explained

    Syncing Ps4 Controller Via Ds4 Windows Utility

    Easy way to connect PS4 controller without usb cable

    Below is a guide on how to sync your PS4 controller via DS4 Windows Utility:

    • From your PC, open a browser and visit DS4Windows.com
    • On the site, you will see an option to Download File
    • Then you will be redirected to the DS4Windows.zip file, where you can download the file to your computer.
    • Extract the downloaded file and double-click on DS4Windows
    • Select a folder where you want to save the App
    • After saving the file, you will see the DS4 welcome dialogue
    • Proceed to connect your PS4 controller using a micro USB cable
    • Once the PS4 controller has synced with your device, you can remove the micro USB cable

    Subsequently, you do not need to connect the micro USB cable to use the controller.

    Read Also: How To Turn On Cheats Sims 4 Ps4

    Micro Usb Cable15ft Extra Long Ps4 Controller Charger Cable Deego Durable Android Charging Cord For Samsung Galaxy S7 Edge S6note 5note 4moto G5android Phonekindle Fireblack

    Price: $7.99Get Fast, Free Shipping with & Return this item for free

    • Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
  • Go to your orders and start the return
  • Select the return method
  • USB
    Compatible Devices Sony PlayStation 4 Controller,PS4 Slim Controller,PS4 Pro Controller,Sony PS4 dualshock 4 controller,NES & NES Classic Edition Gaming Consoles,Echo Dot,Samsung Galaxy S7 Edge/S7/S6 Edge/S6/S5/S4/S3,Samsung Galaxy Note 6/5/4/2/3/J3/J7/A3/A5/A7,Samsung Tab A/Tab 4/Tab 3/Tab A/Tab E/Tab S2/Tab Pro/Tab S,Galaxy A2 Core,A10,M10,J4 Core,LG G4/G3/G2,LG Q60,LG K40,LG K50,Portable Charger,Fire Tablet,Fire TV Stick,BlackBerry,Motorola,Sony,NOKIA Lumia/X Series,Huawei Honor 7X/6X,HTC One M7/M8/M9/M9/A9/E8,Google Nexus,Nexus 7 tablets,Motorola Turbo,Moto X,Moto G,Moto E,Moto G4/G5,Motorola Nexus 6,LG Nexus 5,LG Nexus 4,MP3 MP4 Players,Microsoft Lumia 430,Power Banks/Portable Batteries,Bluetooth Speakers,Bluetooth Earphone,MP3 Players,Android Phone,GPS devices,Wireless Charger,Wireless Keyboards,E-readers,Bluetooth Speakers,Printers,PDA’s,Digital Cameras

    Why Ps4 Controller Is Charging But Not Connecting

    Before discussing why the PS4 controller is charging but not connecting, we need to know what that situation really indicates. It indicates that the PS4 controller doesnt have any problem receiving power through the USB connection, but it has a problem transferring data through that connection, or maybe through the Bluetooth connection as well, or even both.

    This situation is caused by several reasons that are:

    • The two data pins inside the USB port/connector are malfunctioning/failing, yet the power pin is working properly. As a result, your controller doesnt have any problem to charge, yet its not able to connect to the PS4.
    • If youre trying to connect your PS4 controller through Bluetooth, there might be a sort of failure in that type of connection. Either the PS4 Bluetooth has suddenly stopped working, or your controllers Bluetooth device is defective.
    • The PS4 system can no longer recognize the DualShock-4 controller due to system file conflict/error
    • The PS4 controller is defective and doesnt send/receive data signals to/from the PS4 system, thus must be replaced.

    So, these are the most common reasons why the PS4 controller is charging but not connecting.

    Below are suggested solutions to this problem that may help eliminate it.

    Recommended Reading: How To Sign In To Playstation Network For Ps4

    Using Your Playstation 4 Controller With Steam

    Steam added built-in support for the DS4 awhile ago, and some PC games even come with further support and settings that can be tweaked from the in-game menu.

    In the case of Steam, you can select the DS4 as the default controller through the Settings menu.

  • Launch Steam from your Start menu, desktop, or taskbar.
  • Click Steam.

  • How To Resync A Ps4 Controller


    Controller giving you problems by not syncing up to your PlayStation correctly? Luckily, DualShock 4 controllers are made so that players can resync their controllers with extreme ease, thanks to a tiny hole on the back of the controller. If your controller isn’t connecting, this is the best way to try and fix it, barring the use of a USB cable all of the time no one wants to be tethered to their console when they don’t need to be.

    You May Like: How To Use A Ps4 Controller On Project 64

    How To Download Remote Play On Windows

    The easiest way to download the official service for remote play ps4 pc is through the official website of Sony. The one thing that you need to do correctly is choosing the OS. If you choose the wrong OS then it might cause problems in installing, launching, and operating it properly.

    So, if you are using Windows then choose accordingly because downloading it for Mac may cause issues or errors.

    How To Personalize Your Controller With Ds4windows

    Now that you have your PS4 controller connected, you can also personalize your controller depending on your preferences. All you have to do is head over to the Profiles tab in the DS4Windows application.

    Unlike personalizing your PS4 controller on Steam, you can do a whole lot customization with DS4Windows application, such as:

    • Naming your controller

    You May Like: How To Stream Ps4 On Twitch With Pc

    How To Set Up Ps4 And Remote Play After Downloading It

    Step 1 After the software gets downloaded through the official website to your PC, then run and install it.

    Step 2- When the installation process gets completed, you have to set up the console for PS4 remote play pc. Open the app from your desktop and you will get a screen as follows:

    Step 3 Click on Settings and a new window will be opened. Now, click on sign in to enter your login information.

    Step 4 The remote play ps4 pc will start searching for the devices. This may take a long time so we can register manually also. If you dont want to register manually, just wait for the detection of the controller and the devices will automatically be connected.

    Step 5 Open the PS4 console and click on Settings.

    Step 6 Now, click on Remote play connection settings from all the options.

    Step 7 Ensure that you check the Enable Remote Play option. Enabling this will help you in the further process of remote play ps4 pc connection. Now, click on Add Device.

    Step 8 A code will appear on the screen so that you can register manually through it. Enter this code on the Remote Play screen and your devices will be connected.

    Through this solution, the remote play ps4 pc will help you in connecting to your laptop or TV easily. More solutions for how to connect ps4 to laptops are mentioned below.

    Connect Your New Ps4 Controller To Ps4 With Usb Cable

    TUTORIAL-How to connect your PS4 Controller to Your PS3 Wirelessly Without a USB Cable

    If youre using a wired PS4 controller, follow these:

    1) Press the power button on your PS4 console to turn it on.

    2) Plug the other end of your PS4 controller wire into the USB port of your console.

    3) Press the PS button of your controller and hold it down for around 3 seconds.

    4) Your wired PS4 controller should then be connected to the console.

    If youre using wireless PS4 controllers, follow these:

    1) Press the power button on your PS4 console to turn it on.

    2) Connect the micro connector of your USB cable to your PS4 controller. You can find the mini USB port on the back of your controller.

    3) Plug the other end of your USB cable into the console.

    4) Press the PS button of your controller and hold it down for around 3 seconds.

    5) Your wired PS4 controller should then be connected to the console. You can unplug the USB cable and enjoy your games wirelessly now.

    6) If you want to add a second or more wireless controllers, just use the same USB cable follow these same steps, and set it to be the New User on your dashboard.

    Don’t Miss: How To Sign Into Ea Servers Madden 17

    How To Use The Ps4 Dualshock Controller In Steam

    Steam, the popular storefront and game launcher, released an update that allows you to use the PS4 DualShock controller on your PC when running the application.

    It’s easy for you to plug in the Dualshock 4 controller and control your PC games. You can control the TV-friendly Big Picture Mode of Steam using the DualShock 4, and your games will now display PS4 button prompts in-game.

    To use the PS4 DualShock controller on your PC in Steam, load up Steam and check for updates, then once the latest update has installed, plug in your DualShock 4 and you’ll be good to go!

    Unfortunately, this solution doesnt work very well for everyone, so to find out how to use a PS4 DualShock controller on your PC without using Steam, read on below.

    Is There Really No Other Way To Connect A Ps4 Controller Without The Usb Cable

    The USB inputs on my ps4 seem to be rusted out. I can’t seem to get them to connect to anything

    Do you have a computer? Download PS4 remote play @ , turn on your PS4, plug your PS4 controller to your computer after installing the program and signing into it, then go to accessory settings on the PS4, then you should be able to sync it there

    Read Also: Xbox Controller Profile For Project 64

    Fix : Check The Charging Port Of Your Ps4 Controller

    Just like the charging cable, the problem can lie in the charging port of the controller of your PS4. So if you observe that there is no problem with your controller and with the USB cable then you can give a check to the charging port embedded in your controller.

    In this scenario you can do is, if one of your controllers is not charging and another one is all good. Charge both the controllers with the same USB cable. If one is charging and another one is not then you are confirmed that there is a problem with your controller charging port.

    Therefore there is no option left other than to completely change the controller and replace it with a new one.

    How To Connect Ps4 To Tv Pc Monitor Without Hdmi Wirelessly

    PS4 Controller Not Connecting? Here is How to Fix

    Got your PS4 or PS4 Pro/Slim, now in search of how to connect PS4 to tv PC Monitor to have excellent gaming experience. Therefore we are here with a detailed solution for you to connect PS4/PS4 Pro/PS4 Slim to any TVs . So lets dive in for detailed step by step solutions instead of further talk.

    Also Check: Ps4 2-step Verification Lost Phone And Backup Codes

    How To Connect Ps4 Controller To An Android Phone

    In order to connect your DualShock 4 via Bluetooth, your phone must be capable of running Android 10 or later. If it can’t, you’ll either need to use a wired connection or buy a new Android phone.

    Open up Settings. The steps here may vary from phone to phone, but on stock Android, you must choose Connected devices > + Pair new device.

    On your controller, press and hold the PS button and the Share button at the same time.

    As we mentioned before, you must hold these until the back LED lights up in a double-blink pattern don’t release the buttons early, or your phone won’t be able to detect it.

    Once the DualShock 4 is in pairing mode, it will appear as ‘Wireless controller’ under ‘Available devices’ for you to select. Tap it, then tap ‘Pair’ to confirm the connection. The LED should become one solid color blue, in our case.

    More articles

    Popular Articles

    What Is R3 On Ps4