What Is A Torx Screwdriver
A Torx screwdriver is a tool used to drive screws and bolts that have a hexagonal socket in the head . The Torx screwdriver bits are available in 6-point and 12-point versions. The 6-point fits only Torx screws, while the 12-point will also fit Torx-style screws that have been damaged or cross threaded.
What Size Torx Screwdriver For Ps4
If youre like me, youre always on the lookout for the perfect tool for the job. And when it comes to video game consoles, theres no job more important than opening up your PS4 to clean it out . But what size torx screwdriver do you need for the PS4?
Never fear, dear reader! I did the research so you dont have to. According to Sonys official PlayStation 4 te
What Are Todays Most Popular Best Screwdriver For Ps4 Models
There are many best screwdriver for ps4 items accessible today for men and women seeking quality and reliability. Every best screwdriver for ps4 model follows the same essential premise. But they appeal to various users.
Inevitably, certain products will only appeal to particular types of people. Which products are the most popular amongst customers as a whole, you could ask. If you’d want a list, we have one here. Check out our wide range of products that look to be appealing to people of various ages, genders, and places.
Recommended Reading: How To Enable Admin Commands Ark Ps4
What Kind Of Screwdriver Is Needed For A Hard Drive
Lowerys law. A part is stuck. push it. If it broke, nothing: it still had to be replaced.
Schmidts law. If you spoil the car for a long time, it will break down.
Woodds first law of opposition. Push something heavy and it will tip over.
Anthonys Law of Force. Dont waste your energy, take a bigger hammer!
Horners postulate. Experience grows in direct proportion to the disabled equipment.
Lowerys law. A part is stuck. push it. If it broke, nothing: it still had to be replaced.
Schmidts law. If you spoil the car for a long time, it will break down.
Woodds first law of opposition. Push something heavy and it will tip over.
Anthonys Law of Force. Dont waste your energy, take a bigger hammer!
Horners postulate. Experience grows in direct proportion to the equipment disabled.
When there are some hardware problems with the hard drive, if you have the proper experience, it makes sense to inspect the device yourself, without the help of specialists. Also, those people who only want to gain knowledge related to assembly and the general view from the inside resort to self-disassembly of disks. Usually, non-working or unnecessary HDDs are used for this purpose.
How To Install Your New Ps4
In order to install your new PS4, you will need a small Phillips screwdriver. Once you have screwsdriver, follow these steps:
1. Unplug your PS4 from the power outlet and disconnect all cables.
2. Remove the top panel of your PS4 by undoing the screws at the back.
3. Locate the hard drive bay and remove the screws that secure the hard drive cover.
4. Take out the hard drive and replace it with your new one. Make sure to screw it in place securely.
5. Replace the hard drive cover and screw it back in place.
6. Put the top panel back on and screw it in place.
7 . Reconnect all cables and plug your PS4 into the power outlet
Also Check: How To Deactivate Ps4 As Primary
How To Disassemble And Clean Ps4
The user must do everything in his power to prevent damage. To do this, it is enough to do a complete cleaning of the system and replace the thermal paste once every 5-7 months.
This article was written for informational purposes only. If you are not sure that you can disassemble the PlayStation 4 yourself and then reassemble it correctly, contact a workshop. Cleaning in the workshop on average takes no more than 2 hours.
PS4 disassembly starts with preparation of the workplace and necessary tools.
Remove all unnecessary things from the table and prepare:
- Phillips screwdriver
- PS4 disassembly screwdriver
- Tweezers for working with small parts
- Thermal paste
- Medical gloves to ensure the sterility of the procedure
- Alcohol and cotton pads for cleaning parts from dust.
So how to disassemble a PS4:
Flip the PS4 over onto the top cover. Take a pair of tweezers and carefully peel off the 4 stickers from the back of the case. You now have access to 4 9mm TR9 Torx screws to be removed.
Once you remove the sticker, the official warranty will be void. If your PlayStation 4 is under warranty, it is better to postpone self-disassembly and contact the service.
Lift the back cover and set it aside. Moving on to the power supply: remove 3 TR9 screws and 2 Phillips bolts.
Self Disassembly Of The Hard Drive
First, I would like to warn beginners who want to try to fix the hard drive on their own if any problems arise, for example, knocking under the cover. Incorrect and inaccurate actions can easily damage the drive and lead to irreversible damage and loss of all data stored on it. Therefore, you should not take the risk, wanting to save money on the services of professionals. Whenever possible, back up all important information.
Do not allow debris to fall on the hard drive plate. Even a small grain of dust is larger than the flight height of the disk head. Dust, hair, fingerprints, or other obstacles to the movement of the read head caught on the plate can damage the device and your data will be permanently lost. Disassemble in a clean and sterile environment, wearing special gloves.
A standard hard drive from a computer or laptop looks like this:
The back is usually the back of the controller, which is held in place by star screws. The same screws are also found on the front of the case. In some cases, an additional screw can be hidden under the factory sticker, therefore, after unscrewing the visible screws, open the cover very smoothly, without sudden movements.
Under the cover there will be those components of the hard disk that are responsible for writing and reading data: the head and the disk platters themselves.
The controller contains the following elements:
Thank the author, share the article on social networks.
Don’t Miss: How To Change Area Code On Playstation Vue
How To Troubleshoot A Torx Screwdriver
If your Torx screwdriver isnt working properly, there are a few things you can do to troubleshoot it. First, make sure that the screwdriver is compatible with the screws youre trying to use it on. Second, check to see if the blades are dull or damaged. If they are, you may need to replace them. Finally, if all else fails, you can try using a different type of screwdriver.
Ps4 Vs Ps4 Slim Comparison Of Characteristics
Throughout the history of the existence of consoles, during their life cycle, and this is 6. 9 years, manufacturers did not allow themselves to change key characteristics. The first precedent of this kind happened with the eighth generation of consoles. It happened when the Playstation 4 Pro and Xbox one X saw the light of day.This is a long story worthy of a separate publication, so lets go back to ps4 and ps4 slim and look at their technical parameters and compare them.
As you can see, those parameters related to power have remained unchanged. Here between ps4 and ps4 slim we expect to set equal. From communication with the outside world and peripheral devices. ps4 slim received a new standard Bluetooth, HDMI and is able to recognize Wi-Fi at 5 GHz. However, instead of the innovations, slim has lost the S / PDIF digital audio output. Therefore, surround sound lovers will have to look for workarounds for audio output.
We note that the Playstation 4 slim has become a quarter lighter and a third smaller in volume. But the biggest upgrade is in the power consumption. The Playstation 4 Slim consumes 34% less power than the Playstation 4 under the same load. Agree, the difference is significant. Energy consumption goes hand in hand with heat generation, which in turn requires a more powerful cooling system, which is usually noisier. And this rule works in the case of ps4 and ps4 slim.
Read Also: Can You Use Steam On Ps4
How Does It Affect Games
Without getting into the technical details, the difference in graphics power will be critical in supporting 4K resolution. Microsoft is committed to delivering full, native 4K at 60fps, while not all PS4 Pro games can boast the same. Some run at 30 FPS at 4K resolution, while others run at 60 FPS in native 4K. Other games only support 30FPS / 4K, or offer smart upscaling for a 4K gaming experience.
All Xbox One games will perform much better on the One X, whether they were specifically designed for the newer console or not. Plus, you can run apps in Full HD on the One X. To do this, you need to choose whether you want to scale down to Ultra HD for ultra-precise graphics, or run the game at 1080p for better performance.
This is very different from the PS4 Pro, which constantly hides any settings from you until you specifically launch the console in Full HD mode.
How To Use A Torx Screwdriver For Ps4
Using a Torx screwdriver for PS4 is easy and straightforward. You just need to follow these simple steps:
1. Firstly, remove the back panel of your PS4 using a Phillips screwdriver.
2. Then, locate the screws that are holding the hard drive in place. These will be the smaller Torx screws.
3. Use your Torx screwdriver to loosen and remove these screws. Be careful not to strip them.
4. Now, you can remove the hard drive from your PS4 and replace it with a new one. Simply reverse the steps above to put everything back together again.
Also Check: How To Play Online On Ps4 Without Playstation Plus
What Size Phillips Screwdriver To Upgrade Ps4
Welcome to my blog! Im here to talk about the best way to upgrade your PS4 with a new Phillips screwdriver! Ill tell you what size you need and where to find the best deals on Phillips screwdrivers. So whether youre a PS4 gamer looking to upgrade your console, or just in need of a new screwdriver, stay tuned!
Games And Other Content
Microsoft has confirmed backward compatibility between Xbox One and One X. Currently, the service has over 300 games, which is not as few as you might think at first.
Exclusive games are available for both consoles . They differ significantly from each other: if Sony relies on expensive single-player games, then Microsoft prefers mainly online entertainment.
If you are a fan of UHD Blue-Ray, the Xbox One X will definitely not disappoint you in this regard. the console fully supports the format and Dolby Atmos. As for the Sony Playstation 4 Pro, the box only works with HD Blue-Ray, no Dolby Atmos. At the same time, both consoles support the HDR 10 standard equally well.
A lot of time has passed since the PS4 Pro release, and today the console boasts not only improved performance, but also the recently introduced Boost Mode. This feature was introduced in Update 4.50 for PS4. It improves the performance of all PS4 games to varying degrees, with some performing up to 40% better. This is the best iteration for PS4 to date, although if you dont have a 4K display it wont make much of a difference.
Also Check: When To Buy Playstation 4
How To Disassemble Ps4 Pro
To begin with, carefully remove the warranty seals with tweezers . Behind them are the black T8 security torx screws. We unscrew them and put them in the organizer.
Next, lets dismantle the hard drive. Carefully remove the cover .
Next, unscrew one flat cross bolt for fastening the basket.
We take out the basket with the hard drive.
Gently pull the front part of the console body with the PS logo upwards by the rear corner. We pry on the latches. We completely remove the cover, where we will see the turbine. It can be blown out or cleaned with a brush already at this stage.
WARNING: different PS4 Pro revisions have different mounts. For example, the white PS4 Pro lids are much tighter than the black ones. You may have to make an effort.
Using a Torx 8 screwdriver, unscrew all the bolts under the cover. They hold the power supply. Remember carefully where the silver long bolts were .
Remove the shielding from the power supply.
Carefully remove the bottom cover similar to the top one. Be extremely careful not to break the bolt fasteners .
Before us is the motherboard plate and PS4 Pro cables. First you need to carefully remove the cables.
You need to grab the blue tongue and gently pull the trains towards you. Please note: the largest train has a black fastening cap. you need to pry it up with your finger, then the train can be pulled out.
Small trains have no caps, so we boldly take them out, trying not to break. If you have tweezers, use it.
Disconnect the fan power cable.
What Screwdriver To Open Ps4 Controller
No controller, no gaming. The controller is a core part of a PS4. Many of us get comfortable with one controller and we love to use it whenever we are playing a game. But if this controller is not working properly, we all try to fix it first before going for another. So, for fixing it we need to open the PS4 controller. But the question is what screwdriver must be used to open the PS4 controller.
You cannot use the same screwdriver for opening the controller that you have used for opening the PS4. The screws on the controller are very tiny and specially made. Thus, you need Philips head screwdriver #0. The screwdriver is easily available and you must make it a part of your PS4 Toolkit.
You can easily find this screwdriver but you need to make sure that it offers certain features such as the grip of the screwdriver should be cushioned so that you dont put more effort and pressure on the controller, it should give you precise control and optimum rotation, and the tip should be magnetic and heat treated.
You May Like: Can Minecraft Pc Play With Ps4
Required Tools And Components For Ps4 Pro Disassembly
- Phillips head screwdriver .
- Screwdriver or Torx 8 bit with a hole . Regular T8 will not work, please note!
- Alcohol or isopropanol for cleaning and degreasing surfaces.
- Cotton pads or cotton swabs.
- Thermal paste, preferably with a good endurance parameter. The author chose Deepcool Z3, you can take Arctic Cooling MX-4 2019.
- Thermal gaskets . The author used Arctic 1mm thick, 50mm by 50mm. Such pads can be easily found in Russian retail.
- Scissors or a good stationery knife for cutting thermal falls.
- Organizer for screws . You can just take a piece of cardboard and draw squares with signatures on it, in which you will put the bolts. You can hardly get confused here , but this greatly speeds up the assembly.
- Use a flat thin object to pry on the latches
- Soft surface for the console motherboard
HELPFUL TIP: If you are not sure of your memory, then check the photos in this material. They are removed so that you can remember which bolts go where and which loops are connected to what.
A Simple Guide To Open A Hard Disk:
Here I would like a small step-to-step guide that will help you in opening your hard drive.
- Next to the Ethernet port, you will find a plastic panel that must be covering your hard drive. You need to remove this plastic panel first.
- You will find one large screw and you need to use your crosshead screwdriver while holding your hard drive caddy in one place.
- Once the screw is out you need to use your fingers for pulling the caddy out of the PS4.
- You will find four small screws that should be unscrewed for driving the hard drive out of the caddy.
- After inserting the new hard drive, you will fasten the small screws back into their place and put the caddy back where you took it out from.
Recommended Reading: When Can I Buy Ps5
Laoa S2 Steel Screwdriver Review
It is useful to have a compact screwdriver made of good steel with you, since it is not very convenient to carry a full-fledged screwdriver with you, and screwdrivers in multitool and multi-object knives are rarely convenient for long-term work.
Personally, I bought a screwdriver as an addition to a good multitool NexTool Flagship Pro 16 in 1. Testing has shown that it is possible to turn the screws only out of complete despair.
Well, Ill show you right away why the screwdriver is . Here it is in comparison with a high-quality large Xiaomi Wiha and an ordinary old Soviet screwdriver.
Few would think to keep it as the only full-fledged screwdriver in the house, right? But to put it in a bag just in case, for this it looks great.
There is this screwdriver on Ali 5.91
In this lot there is a variant with an additional longer bat with two PH2 stings at the same price. Why not choose it?
This is what a screwdriver looks like. Two-component handle. green rubber and black and yellow plastic.
There is a little flash on the plastic.
Screwdriver length 90 mm. Stick diameter at the thickest part 33 mm.
The main working tool is a standard double-sided extended bit
If necessary, it can be replaced with another option to work with the required splines.
One side is suitable for use with PH2 cross recesses.
The other side is for slotted fasteners. It is difficult to determine the size by eye, but the dimensions of the working part are 6 x 1 mm.
Okay, lets try again.