Tuesday, June 18, 2024

Why Wont My Ps4 Start

Don't Miss

Reseat The Ps4 Hard Drive

How to Fix PS4 Won’t Turn On or Start (Best Tutorial)

One of the most efficient solutions for this problem is to reseat the PS4 hard drive. You need to unscrew it and pull it out of its cage, then replace it inside. Make sure everything is done correctly, and thereâs no loose.

Remember, you have to do that while the PS4 is completely turned off and plugged out from the power outlet.

Now, restart the PS4 and check if that works or not. If not, try the next step.

Cannot Start The Ps4 Cannot Access System Storage

This error is common among PS4 users. It says: âCannot start the PS4. Cannot access system storage. Press the power button for 1 second to turn off the PS4. CE-34335-8â as seen below in the image:

Although we have already addressed this error in detail here, we will try to provide you with quick solutions. If you need details and expatiations, please do visit the referred-to guide.

Note that the official PlayStation support page does offer a brief solution for this error, but it seems useless to many. You can check it here if you wish.

Problem: Loud Fan Noise

As games like The Last of Us Part II and Ghost of Tsushima demonstrate, the PS4 is on its last leg. The fans inside a properly-functioning PS4 are pinned with these late-generation titles, but if youre experiencing excessive fan noise with less demanding ones, theres a problem somewhere. If youre not getting a red blinking light, your PS4, thankfully, isnt overheating. That doesnt mean the fans are running optimally, though.

Recommended Reading: How To Get Web Browser On Ps4

Solution 7 Insert A Disk Into Your Ps4

Sometimes you can turn on your PS4 by putting in a disk. Your console can detect a disk inserted in and start itself. To turn on your PS4 in this way:

  • Plug the power cable into your PS4.
  • Insert a disk into the disk drive on your PS4. Note that you don’t need to insert all your disk in. Keep pushing it in slowly until you see your console automatically turns on.
  • Pull your disk out.

If this works for you, your PS4 will turn on as usual. If it doesn’t, then please read on.

Use Menu Options To Get Out Of Safe Mode

10 Problems and Solutions for the PS4
  • Connect your controller to your PlayStation’s USB port.
  • Select the first menu option. It is labeled Restart PS4.
  • Wait for the PlayStation 4 to reboot.
  • If your PlayStation boots back into Safe Mode after following these steps, you’ll need to continue further down this article to test another repair option.
  • “Restart PS4” looks like it might reset your console’s memory, but I promise it won’t. Using this option will shut down your PlayStation and attempt to start it in the normal boot-up mode. If your PlayStation boots back into safe mode with this option, your console is still experiencing issues.

    Don’t Miss: Does Ps4 Have Backwards Compatibility

    Have Your Ps4 Serviced

    If you have tried all the methods above and you still cant turn on your console, there may be some issues with the components inside your video game console. And you may need help from a specialist. If your PS4 are still under warranty, you can take it to the vendor of your device or contact Sony support to have it repaired or replaced. Or you can pay someone to fix the problem for you .

    Try Booting Into Safe Mode

    Just as you would troubleshoot a computer, you can launch your PS4 in safe mode in hopes of remedying the signal issues. With the PS4 off, hold down the power button for 7-8 seconds on boot to launch into safe mode .

    Image via playstation.com

    From here, you can choose to restart the system, change resolution, update system software, restore defaults, rebuild the database, and initialize. You can learn more about what each of these does on the PlayStation Support site, but I recommend updating the software first.

    If you don’t have an Internet connection available on your PS4, you can also manually update the software via a USB flash drive.

    But, it’s kind of hard to update your software if you can’t see the menu on your screen. In that case…

    You May Like: How Much Is Playstation Vue Per Month

    How To Recover Lost Data From Ps4 After Fixing White Light Issue

    Often problems like the ps4 pro white light of death have long-lasting effects on your device. The most prominent one is data loss. Now if you are anything like us data loss is a total no-no. So to ensure that no data of yours ever gets lost we have introduced the Tenorshare 4DDiG data recovery. It is an all-in-one answer to the data loss question. Its features include,

    • Recovery of data from Local & External drives, Lost Partitions, Recycle Bin, Crashed PCs, etc.
    • Supports 1000+ files types including photos, videos, music, documents, etc.
    • Recover data from unbootable computers
    • Available for both Windows and Mac.
    • No hidden viruses, malware, or adware.
    • Faster with a greater success rate than other apps available in the market.

    Easy Ways To Fix No Signal On A Ps4

    Cannot start the PS4 (How to FIX in under 2 minutes!)

    This article was co-authored by wikiHow staff writer, Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 237,747 times.Learn more…

    Are you seeing a “No Signal” error or a blank screen when you try to play PlayStation 4? Don’t worry, there’s usually an easy fix. This wikiHow teaches you how to properly troubleshoot the “No Signal” error on your PlayStation 4.

    Read Also: When Does Rust Come Out On Ps4

    Fix Ps4 Console Wont Turn On

    There can be several factors that can cause why your PS4 wont turn back on . The causes can vary widely, ranging from issues with power cable to a software glitch. Some of these causes may lead to a minor power problem while some may require expertise like hardware repair.

    As an end user, there are a number of troubleshooting steps that you can do to identify what the cause of the problem is. Generally, youll want to address the easiest possible cause to address and move to the more difficult ones. This guide will walk you through the steps you must do.

    When The Connection Is Unstable

    • We recommend using a wired connection to connect your PS5 console, PS4 console, Windows PC, or Mac to the internet.
    • We recommend a high-speed connection with upload and download speeds of at least 5 Mbps. Check the estimated connection speed for your PS5 console or PS4 console using in the following ways.

    • On your PS5 console, go to > > , and then select .
    • On your PS4 console, go to > , and then select .

    If your network environment doesnât support a sufficient connection speed, contact your internet service provider or mobile carrier for more information.

  • During Remote Play, streaming video and other media on the client device may cause the video to flicker and not play smoothly. This may also happen if other devices on your network are using a large amount of bandwidth. Wait until theyâre idle before using Remote Play.
  • If youâre using Remote Play to control your PS4 console from your Windows PC, Mac, or mobile device, go to or , and then select to set a lower resolution video quality. This may help the connection become stable, allowing for a smoother Remote Play experience. If youâre using Remote Play to control your PS5 console or PS4 console , the video quality is adjusted automatically, depending on your network status.
  • You May Like: How Much Is Playstation 2 In Nigeria

    Solution 5 Replace The Broken Components

    If it is the roach that destroyed your PS4, you need to replace the broken components. Similarly, if your PS4 is not turning on due to the burnt power supply, power management chip, or problematic components on the motherboard, all you can do is to send your device to a professional and get the problematic part replaced.

    How To Troubleshoot A Console That Won’t Start In Safe Mode

    Ps4 downloading application stuck 99+ hours left

    Learn how to resolve issues when trying to access Safe Mode on your PlayStation®5 console or PlayStation®4 console.

    If you’re having trouble turning on your PS5 console or PS4 console, or you find that your console won’t go into Safe Mode, there are a couple of steps to take.

    How to start your console in Safe Mode

  • Turn off your console by holding the power button for three seconds. The power indicator will blink for a few moments before turning off.
  • Once the console is off, press and hold the power button again. Release it after you hear the second beep one beep will sound when you first press, and another seven seconds later.
  • Connect the controller with the USB cable and press the PS button on the controller.
  • Is there an issue with a USB, HDMI, or power cable?

    Try using different USB/HDMI/power cables. It’s also a good idea to test your cables using a different system such as a Blu-ray player. Testing each cable and port will help identify where the issue is occurring.

    You May Like: How To Remove Credit Card From Ps4

    Check If You’re Blinking Blue

    If your PS4 is blinking blue, and never entering the powered state , then it could be a power issue. Turn off the PS4 using the force-shutdown method of holding down for at least 7 seconds until the PS4 beeps twice. Disconnect the PS4’s power cord from the wall outlet, then inspect the power cord for damage, including the pins where you connect it to the PS4 directly.

    If there is any visible damage, that can be your culprit.

    How To Fix It When A Ps4 Wont Turn On

    To troubleshoot a problem where your PS4 won’t turn on, perform each of the following steps in order.

  • Interrupt power to the PS4. First unplug the power cable from your PS4 for at least 30 second, and then plug it back in. Once it’s plugged back in, you can attempt to turn the console on.

  • Power cycle your PS4. Turn the console off by holding down the power button even if the console seems to be off already. After the lights stop flashing, or about 30 seconds have passed, remove the power cables and let your console sit for at least 20 minutes. Press and hold the power button again, while the console is still unplugged. Then plug the console back in and see if it will turn on.

  • Try a different power cable. If you have another power cable available, remove the current cable and try the other one.

    Your PS4 uses a standard IEC C7 power cable, which is the same cable used by the Xbox One S and a variety of other electronics devices. If you don’t own any such devices, these cables can be found at most electronics stores.

  • Try a different power strip or outlet. If you’re using a power strip or surge protector, it may have gone bad. Check to see if other devices work using the outlet your PS4 is connected to, and try plugging your PS4 into a different outlet.

  • Read Also: How To Turn Off Voice In Minecraft Ps4

    What To Check First When Remote Play Isnt Available

    • Check to make sure that your PS5 console or PS4 console can connect to the internet, and that you’re able to sign in to PlayStationâ¢Network.

    • On your PS5 console, from the home screen, go to > > , and then select or .
    • On your PS4 console, from the function screen, go to and then select . Make sure that the checkmark is selected for . You can also check by going to , and then selecting or .
  • Check to make sure that the system software on your PS5 console or PS4 console is updated to the latest version.

  • On your PS5 console, from the home screen, go to > > > , and then select .
  • On your PS4 console, from the function screen, go to and then select .
  • Check to make sure that is updated to the latest version on your Windows PC, Mac, or mobile device. If itâs not updated to the latest version, launch , and then follow the instructions on your screen to update the app.
  • Causes Of Playstation 4 Not Turning On

    Why won’t my PS4 turn on? | Asurion

    This is a relatively hard question to answer. There are many different reasons which can cause your PlayStation 4 to malfunction. One of the top reasons which cause this error is dust clogging into your system, which ultimately damages your electronic boards.

    Although this cause can be remediated pretty quickly, others require a little more effort. Blown sockets, faulty motherboards, and burnt power supplies are a few on a list of many. But, worry not as were going to cater to all of these issues individually.

    Without further ado, lets get into solving your PS4 not turning on:

    Related guide:How to reset PS4 to factory settings

    Don’t Miss: How To Send Game Invites On Ps4

    Replace The Ps4 Hard Drive

    If youâre still using the old stock PS4 hard drive, it might be the reason for all whatâs youâre suffering. Any PS4 user must seriously consider replacing their consoleâs hard drive in order to get better performance and reliability.

    Itâs not weird that the PS4 stock hard drive fails eventually, especially that itâs a piece of hardware manufactured 10 years ago . You can read on the PS4 hard drive specs for additional details.

    If you seek a good PS4 hard drive replacement, please visit this guide.

    Solution : Disable Hdcp

    HDCP refers to High-bandwidth Digital Content Protection, which is a protection technology designed to prevent the digital content from being pirated. It is often used with digital video standards like DisplayPort, DVI, HDMI and so on.

    However, if your monitor isnt compatible with HDCP, your PS4 wont output any video or audio, which leads to PS4 black screen.

    If you encounter PS4 black screen, you can try disabling HDCP on your PS4.

    You just need to go to Settings and select System. Then find the option Enable HDCP and uncheck it.

    Now you can check if the problem has been solved.

    Also Check: How To Play Ps4 Games Without Disc

    Fixing The Ps4 Controller

    Check whether the PS4 controller works or not. To do that, try the following:

  • Connect the PS4 controller to another PS4 console if possible. If not, connect it to a PC and see whether the PC recognizes it or not. Check for any damage in the cable or USB connector.
  • If you figure out that itâs defective, simply seek a replacement. Otherwise, the problem might be with the PS4 console itself. But before you buy a new PS4 controller, try to reset it as the last resort, as sometimes the failure is due to an error in the controllerâs driver, and a reset will fix that.
  • Whether you have bought a new controller or you have reset it, connect it to another PS4 USB port and check whether everything is ok or not.
  • Now, do you still get the âcannot start the PS4â message? If yes, check the next solution.

    Remove The Hard Drive

    How To Start Ps4 Out Of Safe Mode

    Removing your hard drive and then trying to turn the PS4 on can help you pinpoint if your drive is the issue.

    Important: Removing your hard drive may void your PS4’s warranty, so you should check that before trying this tip.

    To remove the hard drive, first make sure your device is powered off and then press into the area where the LED light appears on the top of your PS4, pulling to the left side of the device to pop off the plastic covering.

    Then, use a Phillips head screwdriver to remove the screw that’s marked with the PlayStation button icons it’s located in the front-left corner of the device.

    Finally, use the metal handle-like protrusion at the front of the exposed area of your device to pull the hard drive out of your PS4.

    Once that’s removed, try turning the device on, either as usual or in safe mode. If the problem is in your hard drive, it should power on as usual. In that case, you’d have to replace the hard drive with a new one.

    Recommended Reading: Do Ps1 Games Work On Ps4

    Solution : Change Resolution In Safe Mode

    Changing Resolution in Safe Mode is another effective way to help you get rid of PS4 black screen of death. Safe Mode is present in almost every console or computer to enable the user to perform advanced diagnostics and help in upgrading firmware, resetting databases etc.

    Here are the detailed steps.

    Step 1: Turn off your PS4.

    Step 2: Press and hold the power button until you hear two beeps.

    Step 3: Connect your PS4 controller to the console with a USB cable. Then press the PS button on the controller to boot your PS4 in Safe Mode.

    Step 4: Select Change Resolution and choose OK to confirm the operation.

    Step 5: Then PS4 will restart. After it is restarted, you can select the video output resolution.

    Once you change the resolution, PS4 black screen should be removed.

    If there is still something wrong with your PS4, you need to check if the HDMI port is working properly. Here are some tips for you:

    • If you suspect that the port may be damaged, you need to get the port checked by a technician.
    • If your PS4 is still under warranty, go to find the vendor of your device or Sonys customer service to have your console repaired or replaced.

    More articles

    Popular Articles