Tuesday, November 29, 2022

How To Clean Original Ps4

Don't Miss

How To Clean Ps4 Consoles Safely

Opening and Cleaning My Old PS4… (First Time Ever)

Dust, dirt, and grime are everywhere. They are unavoidable and can easily stick to the things around us. Fortunately, its not particularly hard to get rid of them. Nevertheless, cleaning electronic devices like the PS4 can become cumbersome after a while. If you dont regularly clean your PS4, its performance will be affected, and it could eventually be broken. For this reason, you need to learn how to clean your PS4 to maintain its optimal performance.

To keep your PS4 in good condition, its a must that you clean it once in a while. Also, you must know what are the things can make it dirty and give it enough room to breathe and operate.

In this article, we will discuss the reasons why you should clean your PS4, the ways you can clean it, and the tools that can help you achieve this task.

What Is Inside Your Ps4

The PS4 has many moving parts, so it’s important to keep them clean. As you know, dust can cause overheating in computers, and that’s not something any gamer wants to deal with.

You probably know that the PlayStation 4 has a Blu-ray disc drive, but many other vital parts make up the console. The PlayStation 4 comprises three main parts: the power supply unit , the motherboard, and the hard drive bay.

The PSU converts AC from your wall socket into DC for use by the motherboard and a hard drive bay. It also has a cooling fan that helps reduce heat generated by components inside the console.

The motherboard contains many chips, including CPU, GPU, and memory modules. You can see these chips on the surface of your console in between vents on either side of its top panel they’re usually covered by rectangular shields with small holes on them.

Your console’s hard drive bay sits underneath its disc tray and houses your 500GB or 1TB hard drive .

How To Clean A Playstation Four

A dirty PS4 can soon become a dysfunctional PS4. With dust and debris getting into the fan, your PlayStation will run loud and become laggy.

Were here to teach you how to clean your PlayStation. This method is for the original PS4, but we have some tips for the PS4 Pro and Slim, too.

Well show you how to clean the PS4 fans and the exterior, as well as the controllers. Soon your PS4 will be looking brand new and hopefully running a lot smoother.

How to Clean a PS4

Once youve exposed the fan, spray compressed air into the vent while holding the fan in place. Use a cotton swab to clean the blades. Reassemble the PlayStation and wipe the exterior with cleaning wipes. Remove dust with a can of compressed air or your vacuums nozzle attachment. Wipe the PS4 once more with a dry microfibre cloth.

Don’t Miss: Is It Possible To Connect Airpods To Ps4

How To Clean A Ps4 Ps4 Pro Or Ps4 Slim

Knowing how to clean a PS4 can come in handy if it stops working properly or if the fan is too loud. It’s good practice to clean your console before selling your PS4 or giving it away.

The images below are of the PS4 Slim model, but you can follow these instructions to clean any PlayStation 4 console:

  • Make sure your PS4 is turned off and everything is unplugged.

  • Use the compressed air to clean out the USB ports on the front of the console, the ports on the back, and the vents along the device’s side. Gently use a toothbrush or cotton swabs to remove any remaining debris.

    Hold the can of compressed air upright and six inches away from the console to prevent moisture from getting into the internal components of your PS4.

  • To remove the outer casing, gently lift under the top cover of the PS4 from the console’s front. Clean off any dust inside the casing with a cloth.

    Opening your PS4 will void the warranty. If you purchased your PS4 within the last year, contact Sony PlayStation customer support to report problems with your console.

    To open an original PS4 model, you must remove the warranty stickers on the back of the console and use a T8 or T9 Torx screwdriver to remove the screws.

  • Put your finger on the center of the fan to hold it in place, then apply compressed air in short spurts to blow dust out of the fan.

    Do not let the fan spin while blowing air on it. A rotating fan can cause an electrical short.

  • How To Clean A Ps4

    The back tabs on the console are unsealed due to being dust cleaned ...

    Phillips screwdriver

    A cotton swab

    Before we take you through the steps, its worth flagging that as soon as you start dismantling your PS4 to clean the interior, you will void the warranty. So, if your PS4 is overheating within the warranty period , contact customer service rather than cleaning it yourself.

    You also need to be aware that the steps are different depending on whether you have an original PS4, a PS4 Slim or a PS4 Pro. And to further complicate matters, theres a second version of the original PS4 that was made after September 2015 and which is slightly different again. The photos here are for the first original model, but weve indicated where the steps differ for the others.

    1. First, make sure that your PS4 is switched off and all cables are disconnected from the consoles body.

    2. Next, you want to clean the outside of your PS4. To do this, take your can of compressed air and spay bursts of air into each of the ports, front and back, as well as the vents. Make sure you keep the can upright as you spray and keep your distance so you dont spray moisture into the PS4. If you dont own a can of compressed air, we recommend Falcon Dust, Off Compressed Gas ).

    3. Next, run a dry microfiber cloth along the surfaces of your PS4 to get rid of obvious dust. While you have this cloth to hand, wipe the surface and around the area where your PS4 sits as well. This clears away any potential dust your PS4 may collect once back in place.

    Read Also: How To Fix Your Ps4

    Don’t Let A Glitched Controller Mean Game Over

    The Asurion Home+ protection plan offers peace of mind for all of your eligible home tech, including your favorite gaming systems, for less than $1 per day. From graphical glitches to faulty drives, we cover your video game console and original controller from the unexpected breakdownâno matter where or when you purchased it. Learn more at asurion.com/homeplus.

    *The Asurion® trademarks and logos are the property of Asurion, LLC. All rights reserved. All other trademarks are the property of their respective owners. Asurion is not affiliated with, sponsored by, or endorsed by any of the respective owners of the other trademarks appearing herein.*

    The devices we love arenât cheap. Protect them with Asurion Home+.

    Weâll cover all your favorite home tech for less than $1 per day. No receipts or registration forms required.

    How To Clean Your Ps4 Controller

    With sweaty palms, crumbs, and a plague of dust, keeping your PlayStation 4 controller clean can be a chore. From sanitizing to cleaning out the gunk lodged in between the creases, were here to show you how to clean your PS4 controller.

    Were going to cover cleaning the outside and inside of your controller. Although most jobs simply require an external wipe down, you may have to take apart your controller to fully clean it out. As a warning, you could break your controller if you need to open it up, so proceed at your own risk.

    Read Also: Spider Man Ps4 How To Unlock Suits

    When To Clean A Ps4

    You should clean your PS4 externally every month to prevent dirt and dust from building up on and inside your PlayStation. If you dont protect your PS4 from dust, it will become a problem.

    Symptoms of a dust issue include a noisy fan, overheating, and hardware failure. If youve noticed this happening with your console, it might be time for a deeper internal clean so it works better.

    However, the bad news is that cleaning the original PlayStation Four internally can void the warranty. So only do this if your warranty is up and youre okay with the potential consequences, like a broken PlayStation. To repeat our main advice, keep on top of dust control so that you dont end up in this predicament.

    How To Clean Ps4 The Right Way

    How to CLEAN PS4 and FIX PS4 LOUD FAN! (EASY METHOD)(2021)

    Learning how to clean your PS4 begins with the right tools and these are:

    • Microfiber cloth
    • Can of compressed air
    • Cotton swab like Q-tip

    You will also need to learn how to clean PS4 controller as dust and dirt can easily accumulate on its cracks and crevices. Blowing out the buildup using your can of compressed air is recommended then wipe the off with The Crown Choice microfiber cloth. Another tip on how to clean gamepads is to mix 50:50 isopropyl alcohol and water in a spray bottle and dampen the cloth with it before wiping your controllers with it. Or dip a cotton swab in the solution, press the tip to remove excess solution, and use it on the crevices on your game buttons.

    Yes. 10% off your order for reading this article. Use code 10TCCBLOG at checkout.

    Don’t Miss: How To Get Open Nat Ps4

    Cleaning The Motherboard Of The Ps4 Controller

    The motherboard is the most critical part of the PS4 controller. It is responsible for processing all the information from the buttons and joystick and sending it to the PS4 console. To clean the motherboard, you can follow these steps:

  • First, carefully remove the circuit board from the controller housing.
  • Once the circuit board is exposed, use a soft brush or compressed air to remove dust or dirt.
  • To remove stubborn stains, you can dip a soft cloth in rubbing alcohol and use it to remove them, as shown below gently.
  • Finally, return it to the controller housing, ready to be reassembled again. Be sure to be careful not to disconnect any wires in the process.
  • Use A Can Of Compressed Air

    A can of compressed air will be very helpful in the cleaning process. Before using it, bear in mind that you need to take extra precautions with it. You need to hold it upright to lessen the possibility of releasing moisture inside the can. Hold the nozzle at least five to six inches from the part that you want to clean. Then blow the compressed air around areas that you would like to clean. Continue blowing for short bursts and gently go through the remaining surfaces of your console.

    You May Like: Why Does My Ps4 Disconnect From Wifi

    How To Clean A Ps4 Without Breaking It

    Heres how to clean a PS4 and get it back up to speed

    Its not a bad idea to learn how to clean a PS4 if you own one of these consoles.

    A lot of us still have yet to take advantage of the PS5 restocks, which means we continue to play some of the best PS4 games on our trusted console. The problem is, with everyday use, dust will inevitably collect both outside and inside of the casing and this can be very tricky to remove. You cant leave it as it is though a build-up of dust will lead to your PS4 overheating, which can cause serious frustration in the middle of a game.

    Cleaning the dust out of a PS4 has somewhat of a reputation for its difficulty, and for good reason. This is by no means a simple process unless you know what youre doing one wrong move and your PS4 may not run properly when you start it up again. The good news is cleaning a PS4 is straightforward with a little guidance. Here, we take you through exactly what you need to do step-by-step so you can get your PS4 running as good as new.

    Remove The Back Stickers And Screws

    How to Clean PS4? Detailed Steps and Pictures Are Here

    Now that you’ve got your PS4 ready to work, turn it around so the back is facing you, then flip it upside-down. You’ll see three stickers along the “top” that you must remove.

    Note that if you have the slightly revised model of the original PS4, you’ll only see one sticker and screw here in the middle.

    The middle one has a special warranty sticker that damages itself when you remove it. The other two are a bit thicker and might require a bit of extra work to peel off. Use your knife or another pointed tool to peel back a corner of the stickers, then they should come off easily. Be careful not to scratch your system while you remove them.

    Set them aside if you want to re-apply the stickers later, or throw them out if you don’t care. Once you’ve removed the stickers, use your TR9 screwdriver to remove the screws underneath. They’re short, so they shouldn’t require much effort. Take care not to strip them, and set them aside in a safe place.

    Read Also: How To Reset Strike Pack Ps4

    Shut Down Your Ps4 And Unplug Everything

    Before you start cleaning your PS4, make sure the console is turned off. It should have no lights on the top if you see an orange light, then it’s in Rest Mode and you’ll need to shut it down fully.

    To fully shut down, turn your PS4 on, then press and hold the PlayStation button on your controller to open the Quick Menu. Head to Power > Turn Off PS4. Wait until all lights on your PS4 turn off, then unplug the power cable, HDMI cord, and anything else connected to it .

    Bring your PS4 to a place where you have some room to work. Since you’ll be removing small screws, you should have a safe place to set them.

    Like when building a PC, you should take care not to build up static electricity. Don’t work on a static-prone surface, such as a shaggy carpet, and try to only touch the plastic components when cleaning.

    To Properly Clean A Ps4 You Will Need:

    Before we discuss how to clean a PS4 itself, note that to clean a PS4 controller, you simply need to use compressed air to blow off any dust, and then wipe it down with a microfiber cloth. If the controller is still visibly dirty, use a cloth lightly dampened with a 50:50 blend of water and isopropyl alcohol.

    Also Check: When Can You Pre Order Playstation 5

    Enjoy A Clean Ps4 Controller

    A clean PS4 controller can help improve your gameplay by ensuring that the buttons and sticks are responsive. By following the above steps, you will have a clean PS4 controller that you can be proud of. Just remember to clean it regularly to maintain it in tip-top condition.

    A build-up of dirt and grime can make the controller less responsive, making it more difficult to control the game. Dirt and dust can cause wear and tear on the buttons and joystick, eventually leading to faulty ones. Using a clean controller just feels nicer! It’s more pleasant to hold and use a controller free from dirt and grease.

    Cleaning The Ps4 Slim

    Clean Your PS4 Safely!!!
  • 1Clean the outer vents. Use a small brush and canned air to clean the outer vents and intake ports around the sides of the console.
  • 2Clean the heatsink. Use the same brush to clean the heatsink, as well as canned air for a deeper clean.
  • 3Clean the fan and blades. Use canned air and cotton swabs dipped in rubbing alcohol to thoroughly clean the fan and its blades.
  • Read Also: What Came First Xbox Or Playstation

    What You’ll Need For Cleaning A Ps4

    PS4 cleaning is a relatively simply job, but does require a few materials:

    • A TR9 Torx security bit screwdriver. The PS4 uses TR9 security screws. A TR8 screwdriver may work, but you should use a TR9 for best results. Make sure you get a screwdriver with a security bit, which has a tiny hole in the center.
    • If you don’t have this already, consider the TECKMAN PS4 cleaning repair toolkit, which has the right screwdriver plus a few more handy tools. If you already have a Torx set or computer opening toolkit, it likely has the bit you need.
  • A standard Phillips-head screwdriver. There are a few screws inside the PS4 that require this screwdriver to remove. A smaller screwdriver will work best here.
  • A knife or other sharp object. You’ll need this to peel off the stickers covering the PS4’s rear screws.
  • A can of compressed air. You’ll need this to blow out the dust. You can purchase , or in stores like Walmart.
  • For a more efficient cleaning, you may also want to use these optional materials:

    Note that if you have an original model PS4, opening your console and cleaning it will void your warranty . However, you can remove the cover from the PS4 Slim and PS4 Pro models without voiding the warranty. Chances are that if you’ve had your PS4 for long enough that dust buildup is an issue, your warranty has probably expired anyway.

    We’ll show steps for cleaning the original PS4 in this guide . At the end, we’ll mention the differences for the other models.

    Cleaning The Joysticks And Buttons

    Like the other parts of the controller, the most effective way to clean the joysticks and buttons is to use rubbing alcohol and a cotton swab. You can follow these steps to clean them.

  • First, pop off the joysticks and pull off the cradles holding the buttons to remove them.
  • Now, dip the cotton swab or clean cloth in the alcohol and gently rub it over the buttons. Move the cotton swab around frequently to avoid spreading dirt and grime everywhere.
  • Next, using the cloth, clean the sockets of the buttons thoroughly, as shown below.
  • Once you’re finished, let the controller joysticks and buttons dry before inserting them into the controller again.
  • Also Check: Does Rebuilding Database On Ps4 Delete Everything

    More articles

    Popular Articles

    How To Take Apart A Ps4