Connecting With A Cable
Sony Dualshock Usb Wireless Adapter
This add-on product made by Sony does the Bluetooth pairing in hardware. To the Raspberry Pi and RetroPie, the controller appears as a regular wired USB controller and no additional software setup is required.
One adapter can pair one controller, though multiple adapters can be plugged into the one Pi to allow use of multiple controllers.
To pair the controllers:
- Plug in the USB adapter, it will slowly blink, this is the “searching” signal
- Push the adapter in more, it moves slightly inwards, and hold for 3 seconds
- The USB adapter blinks faster, this is the “pairing” signal
- Put the controller into pairing mode with and PS
- The USB adapter light and controller light bar will go solid, they are now paired
Repeat with additional adapters and controllers as required.
Troubleshooting: Ps4 Wireless Connectivity Problems
If your controller wont turn on when you hit the PS button, plug it into the PS4 to make sure it has a charge. If the light bar doesn’t glow, it could be a problem with your USB cable, or the controller’s internal battery could be damaged. If you have an extra cable handy, try using that instead to eliminate the first possibility.
If the controller can’t connect to the console wirelessly even though it is charged, then the problem lies with either your console or your controller’s Bluetooth connectivity. If your other PS4 controllers are working wirelessly, the faulty controller is to blame. Nonetheless, you can continue playing with the controller connected to the console via a USB.
If you’re unable to pair a PS4 controller with your console, try resetting it.
Also Check: How To Delete Psn Account On Ps4
Enable The Dualsense Controllers Pairing Mode
For any additional controllers you buy, youll have to pair them up with the console via Bluetooth pairing.
The first step to get your DualSense controller paired is to put it in pairing mode. To do this, hold down the PlayStation logo button and the Create button at the same time. The PlayStation button is between the two analog sticks, while the Create button is at the top-left of the trackpad.
Youll know the controller is in pairing mode when the light under the trackpad blinks blue rapidly, goes dark for a second, then blinks again.
Next, go to your PS5 settings by select the small gear icon in the top-right corner of the main menu.
Next, navigate to Accessories.
Go to General and then Bluetooth Accessories.
In this menu, if your PS5 controller is still blinking, you should see Wireless controller on the list of Accessories Found. Select it, and your secondary controller is now paired with your PS5 and will appear under Registered Accessories.
If you want to turn off pairing mode without pairing, press the PlayStation button again.
Which Controllers Work On Switch
Along with the Joy-Cons that come with the system, the Switch supports several alternatives, including the Nintendo Switch Pro and Wii U Pro controllers. You can even use a GameCube controller if you have the GameCube adapter for Wii U. You can also use one of the many third-party gamepads available for the Switch.
Surprisingly, the Switch supports controllers for other game consoles, including the DualShock 4 and many Xbox controllers. Most controllers that work with the PS4 and Xbox One are compatible with Nintendo’s console, including arcade-style fight sticks like the Mayflash F300.
Using a PS4 or Xbox One controller is not ideal for playing Switch-exclusive games like Zelda: Breath of the Wild, but they might be better for playing retro games and 2-D platformers like Mega Man 11.
Read Also: How To Connect A Ps4 Controller To Pc With Bluetooth
Using The Wireless Controller
Press the PS button on the controller, and then select a user.
- The first time you use a controller, you’ll need to pair it with your PS4 system.
- Up to four controllers can be used at the same time. When you press the PS button, the light bar will glow in a uniquely assigned color. The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.
How To Charge Your Ps4 Controller
The controllers internal battery will charge while it is connected to the PS4. If the controller remains connected while your PS4 is in rest mode, it will continue charging, and the light on top will turn yellow. The light will also flash yellow when your controller is running low on power, and you should see an on-screen message telling you to plug it in.
When charged, the light bar on the top of the controller will glow different colors depending on which player the controller is assigned to player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink.
Recommended Reading: Can Pc Players Play With Ps4 Players
How To Pair Your Playstation 4 Controller With Bluetooth
If you can’t get your hands on one of the official DS4 wireless adapters, you can always give Bluetooth a shot. Fair warning, the connection might not always work depending on your PC’s hardware, but it’s at least worth a shot if you don’t want to snake a long cable to the controller.
Make sure the controller isn’t paired with a PS4 a good way to start is to pair the controller with your PC using the wired method before proceeding.
Drivers should now be automatically installed. Like with the wired connection, hitting the PS button with Steam running will launch Big Picture mode.
How To Connect A Ps4 Controller To Your Iphone In 4 Simple Steps And Play Mobile Games With A Real Controller
- You can connect a iPhone through the phone’s Bluetooth menu.
- Before you connect it to your iPhone, be sure to put your PS4 controller into pairing mode by holding down the PlayStation and Share buttons.
- Connecting a PS4 controller to your iPhone will let you play a variety of mobile games with a controller.
As addicting and fun as iPhone games are to play, some gameplay mechanics can be tricky to navigate when all you have is a touchscreen. This is especially true for first-person shooters, and other games that require fine movement.
But there’s good news for PlayStation 4 gamers: You can connect your PS4 controller to your iPhone, and use it to play iPhone games.
Note that not all games have controller support, and the App Store generally won’t tell you which games allow it or not. The only real way to tell is to do research online, or test it yourself.
You can get started by connecting your PS4 controller through the iPhone’s Bluetooth menu.
Also Check: How To Reconnect A Ps4 Controller
How To Connect A Ps4 Dualshock 4 Controller To A Pc
The PlayStation 4’s DualShock 4 controller is a fantastic gamepad, and with some tinkering you can get it to work with your PC.
Ive been PCMags home entertainment expert for over 10 years, covering both TVs and everything you might want to connect to them. Ive reviewed more than a thousand different consumer electronics products including headphones, speakers, TVs, and every major game system and VR headset of the last decade. Im an ISF-certified TV calibrator and a THX-certified home theater professional, and Im here to help you understand 4K, HDR, Dolby Vision, Dolby Atmos, and even 8K .
How To Pair Your Playstation 4 Controller With A Wireless Connection
Sony has an official USB-A wireless adapter meant to bridge the gap between the DS4 controller and any PCs without Bluetooth capabilities. Unfortunately, it seems like the product has been discontinued, making it much harder to track down.
This Japanese version which by all means should work no matter where you are located costs about $60 , making it the most expensive route. If your PC doesn’t have Bluetooth capabilities and you don’t want a long cable running between your PC and controller, though, it becomes quite attractive.
To use this adapter, just plug it into your PC and let the drivers install automatically. From there, the DS4 should operate just as though you have a wired or Bluetooth connection.
Don’t Miss: How To Gameshare On Ps4 With More Than One Person
How To Sync Additional Ps4 Controllers Wirelessly
Once you have at least one controller synced with your system, you can add more wirelessly:
With your synced controller, locate the Settings option in the row of icons above the PS4 home menu, represented by an icon that looks like a briefcase.
Navigate to Settings > Devices > Bluetooth Devices. You should see a list of devices presently synced with your console.
On the PS4 controller, you wish to sync, hold down the PS button and the button simultaneously for 5 seconds.
When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.
Using A Ps4 Controller On Mac
Mac set up isn’t too different, but it’s a bit harder to connect via a micro-USB cable. If you would rather go the cable route rather than Bluetooth you’ll have to complete a few extra steps. First, connect your controller to the Mac, and make sure it’s on. Click on “About This Mac” from the Apple logo in the menu bar, then go into system report to find USB. Once you click on that, you should see the controller pop up.
A Bluetooth connection on Mac is very easy. Simply open system preferences from your Apple menu, and choose Bluetooth. Put your PS4 controller in pairing mode by holding down the PS and share buttons simultaneously until the light flashes. The controller should soon pop up in the Bluetooth window. Click on it to complete the set up. As with the PC, you can also use Sony’s proprietary USB adapter. You’re now free to enjoy all your PC or Mac gaming with your favorite PS4 controller.
Recommended Reading: How To Delete Ps4 Messages
How To Use A Ps4 Controller On Switch
If your DualShock 4 is synced with a PlayStation 4 console, unplug the console before you begin so it doesn’t interfere with the Switch adapter.
To use a Playstation official DualShock 4 controller with your Nintendo Switch, follow these steps:
Place your Switch in the dock and turn it on.
Plug a , into one of the Nintendo Switch USB ports.
Use the Joy-Con controllers to wake up your Switch and then press L+R to pair both Joy-Cons with the console.
Select System Settings from the home screen.
Select Controllers and Sensors, and then select Pro Controller Wired Communication to turn it on.
Select OK.
Connect the PS4 controller to the Magic-NS with a USB cable. The LED light on the controller should turn on, indicating it’s been detected.
Press and hold the black button on top of the Magic-NS adapter until the light on the back starts flashing.
Press the PS button and the button simultaneously on the DualShock 4. The adapter should automatically detect it.
Unplug your PS4 controller from the adapter and use it wirelessly as if it were a Switch Pro Controller.
Making Your Ps4 Controller Discoverable
Pair your DualShock4 controller with your Bluetooth dongle by making your PS4 controller discoverable. To do this, press the and the PlayStation button for three seconds, or until the light bar at the top of the controller shows a double blinking pattern.
Note: if the PS4 system your controller is synced to is still plugged up, then your controller might try to connect to it if you press the PS button.
Recommended Reading: How To Hook Up Headphones To Ps4
How To Connect Ps4 Controller
Got your new PS4 controller? Thats wonderful! It makes you the envy of others now. Now are you wondering how to connect your PS4 controller to the console? Dont worry. Its exactly easy to connect.
Lets start.Note: If you just want to sync your PS4 controller, go to this guide then: How to Sync PS4 Controller
Set The Ps4 Controller In Pairing Mode
The step I missed when I tried the first time is to put the PS4 controller in pairing mode.When you press the PS key, the controller is searching for the console, but not available for Bluetooth access.
Here is how to put the PS4 controller in pairing mode:
- Make sure the controller is off.
- Then press the keys PS and Share simultaneously:
- The front light starts to blink quickly
The controller is ready to pair with the Raspberry Pi.
You May Like: How Much Was The Ps4 At Launch
How To Connect Ps4 Controller To Ps4
The first time you connect PS4 controller to your console is a little tricky. You usually press the PS4 button on your Dual Shock 4 controller and power up the PlayStation. But if you havent paired your controller yet, youll have to do a little more than that.
To pair a controller to PS4, youll need a USB-cable with a Micro-B end. You get one cable along with your PlayStation, but any other cable can work to connect your controller. Once youve found the suitable cable, here is how to sync PS4 controller.
- Step 1: Plug the USB end of the cable into PS4 and the Micro-B end into the charging port of your controller.
- Step 2: Press the PS button on your controller to power up your PS4. Youll hear the trademark beep as this happens.
- Step 3: Let the controller charge for about an hour.
- Step 4: Press the PS button once youre in the main menu of your PS4. This should bring you to the profiles screen.
- Step 5: Create a profile for yourself while the controller charges or login to an existing account.
- Step 6: After selecting a profile, your controller should change its color from Yellow to Blue .
- Step 7: Once the controller is fully charged , disconnect it.
Caution: If your controller fails to power up the PS4 in Step 2, you might be using a faulty cable. In which case, you may want to use a good quality cable, preferably the one that comes along with your PS4. Connecting a quality USB cable allows you to sync your PS4 controller.
Now You Can Put Your Dualsense Into Pairing Mode
So, there it is an easy process, but now you know how to set your DualSense up ready to pair with another device.
The DualSense is the latest controller from Sony, so it does make you wonder why it doesn’t have a dedicated pairing button. That would surely make life easier for its users.
Saying that, none of the previous Bluetooth PS controllers had such a button, either, so why try to fix what isn’t broken?
Also Check: Can You Connect Oculus Quest To Ps4
Connect Ps4 Controller By Usb
You connect your PS4 controller to your PC using USB cables. Here we are showing how to connect the controller on your PC using USB. All you have to do is:
Step-1: Plug the USB
There is a port for connecting micro-USB cables in PS4 controllers. Plug the cable to your controller using the port.
Step-2: Plug the PC
Now, connect the opposite side of the cable to the USB port of your PC.
Now you have to install a driver named DS4Windows. Download and install that.
Pair A Secondary Dualshock 4 Controller To Your Playstation 4
Your PS4 lets you connect up to four controllers at a time. To add a secondary controller to your console, you dont need the USB cable.
Using your paired controller, from PS4s main screen, select Settings.
Scroll down the Settings page and choose Devices.
Select Bluetooth Devices.
On your new controller, press and hold down the PS and Share buttons for about five seconds. Your controller will appear on your PS4s screen. Select it to pair it.
Your new controller is now paired with your PS4, and you can use it to play your games and perform other tasks on your console.
Don’t Miss: Can You Crossplay Gta 5 Xbox And Ps4
Operating System Windows 10
- If you are using Windows 10, right-click on the Bluetooth icon in the bottom right tray and click Add a Bluetooth Device. This will open up Bluetooth & other devices. Make sure your Bluetooth on your computer is set to on and click Add Bluetooth or other device. When it asks you what kind of device you want to add, click the top option which should be Bluetooth. Your computer will begin searching for a Bluetooth device. If your controller is still rapidly flashing from step 1, it should find it within about 5 seconds.
Thats it the controller is now connected wirelessly. In case you find an issue with detecting the Wireless Controller after turning on Bluetooth, troubleshoot your PC Bluetooth adapter by updating drivers.