How To Connect 2 Ps4 Controller

How To Connect A Ps4 Controller To A Mac

How to connect two ps4 controllers

Perform the initial instructions listed under How to connect a PS4 controller to other devices, above, to put the controller into pairing mode.

On your Mac, head into System Preferences -> Bluetooth. Ensure Bluetooth is turned on and your Mac is discoverable.

After a while, the controller should appear on the list of devices.

Once connected, if youre running on macOS Monterey or later, there will be an Options button.

Pressing this gives you a menu where you can change what various buttons will do with compatible games.

Perform A Hard Reset On Your Controller

If re-pairing the controller doesnt work, the issue might be with the controller itself and not the PS4. In that case, youll need to reset the controller. Youll need an unfolded paper clip with which to push a hidden button on your PS4 to reset it.

Turn off your PS4 and unplug both it and your internet router or modem so that your controller wont receive any network signals when you reset it. When thats done, flip the controller over and look for a small hole on the right side. Push the paperclip in the hole and push the button inside for three to five seconds. Its best to hold it down for a count of 10 to be sure.

When youve done that, plug in both your router and your PS4 again. Turn on the PS4, then plug your controller into the USB cable. That should re-pair the controller from scratch. If it doesnt work, you may have a broken controller on your hands.

How To Connect A Ps4 Controller To An Android Smartphone

The best part about smartphones today is that you can spend hours enjoying some high-quality games right within the palms of your hands. While short term gaming is healthy, long term gaming sessions can be tiresome, especially if you are interacting with the smartphone directly. Games that come under the racing, sports, or shooter genres require us to interact with multiple zones on the smartphone display. This can be very difficult especially if you have to act in realtime.

In such cases, the best solution is to play games on your smartphone using a game controller. There are many controllers available in the market that can easily pair with your Android smartphone and get a more engaging gameplay experience. However, you dont need to spend a single penny if you own a PS4. The Dualshock controller on the PS4 is probably the best wireless controller in the market, and if you are an Android smartphone user, you can connect the Dualshock controller to your smartphone and start playing your games.

In this tutorial, we will show you how to connect a PS4 controller to an Android smartphone.

Step 1. On the PS4 controller, click on the PS and buttons together and hold them for a few seconds until the led indicator starts blinking. This puts the Ps4 controller into the pairing mode.

Step 2. Open the Settings app on your Android smartphone.

Step 3. Tap on the Bluetooth option from the Settings menu.

Also Check: Plugging Ps4 Into Laptop

Connect Your Wireless Controllers To Ps4 Without A Usb Cable

If you want to add second or more wireless controllers to your PS4 console, but you do not have the USB cable, you still can connect them without the USB cable. Here is how to do it:

Step 1: On your PS4 dashboard, go to Settings, then, Devices then, Bluetooth Devices, through a media remote for your PS4 or a connected PS4 controller.

Step 2: On your PS4 controller, the one you want to connect, press down the SHARE button and the PS button for around 5 seconds.

Step 3: Your PS4 controller should then show up on the Bluetooth Devices screen. Choose it.

Step 4: Your PS4 controller should then be connected to your console now. Enjoy your games.

How To Connect Ps4 Controller To Ps5

How to Connect Your PS4 Controller to Your Android Device ...

There are several reasons why you might want to know how to connect a PS4 controller to PS5. For starters, you might have been put off buying a second PS5 DualSense pad by the price or reliability scares. And you also might want one if you plan to play certain PSVR games on the PS5.

The good news is that you can use a PS4 controller with a PS5, and in this tutorial well show you how to connect and disconnect your spare DualShock 4 pad.

Before we begin though, you should know of the one big limitation: you cant use a PS4 pad to play PS5 games. This is especially infuriating as Sony lets you do just that when streaming your PS5 games to another device, but there we are.

So why would you want to use a PS4 pad with your PS5? Backwards compatibility. While the DualSense pad will work with all PS4 games , connecting a second DualShock 4 pad will allow you to play local multiplayer PS4 games on your PS5 without buying additional hardware. In my house, this has proved invaluable for splitscreen Rocket League, and cooperative exploration in Spelunky 2.

So without further ado, heres how to connect a PS4 controller to PS5.

You May Like: How To Turn On Cheats Sims 4 Ps4

How To Disconnect Your Dualshock 4 From Your Iphone Or Ipad

Once youre done playing with the DualShock 4, heres how to turn it off. If you want to use the controller, you simply need to hold down the PlayStation button for 10 seconds. On the iPhone, the most convenient method is to use the Control Center.

Open your Control Center on a Face ID-compatible iPhone by swiping diagonally from the upper right of your screen toward the lower left. On a Touch ID-compatible iPhone, swipe up from the bottom of the display.

Press and hold down on the blue Bluetooth icon.

In the menu that pops up, press and hold down the icon that says Bluetooth: On.

You should see DUALSHOCK 4 Wireless Controller in the options that pop up. Press it, and your controller will immediately disconnect.

And heres the less convenient method:

Open the Settings app and press Bluetooth.

Under My Devices, youll see DUALSHOCK 4 Wireless Controller. To the right, youll see a letter i within a blue circle. Press it.

In the menu that pops up, press Disconnect. The controller should immediately stop working.

When you want to use the controller again, just press the DualShock 4s PlayStation button and it should immediately start working.

Theres a good chance it might accidentally turn on this way if you have the DualShock 4 stuffed in your bag. If youre on a trip, its wise to simply unpair the device and re-pair it when you want to play. As youve seen above, doesnt take long.

Connecting With A Cable

1Plug in your PS4 controller to your PS5 console. Use the charging cable that came with your PS4 controller . The charging cables that come with PS5 controllers are different cables .XResearch source

2Choose which profile you want to assign the controller to. On your PlayStation 5, you’ll see a list of all the profiles logged into the system. Navigate to the profile you want to use and press the x button.

3Unplug the cable and continue playing. You only needed the cable for the immediate connection from your controller to your console, but you can continue without it.XResearch sourceAdvertisement

You May Like: How To Split Screen Fortnite On Ps4

How To Unpair A Ps4 Controller

Make sure the controller you want to unpair is turned off.
Using another PS4 controller, turn on your console. From the PS4 home menu, go to Setting then, Devices then, Bluetooth Devices.
You should notice a list of controllers. Select the one you want to unpair and select delete.

We have explained the simplest ways to let you know how to connect ps4 controller to ps4 with the potential problems you could face and how to resolve them. We hope this simplest guide will be helpful for you.

Use More Than One Ps4 Dualshock Controller Over Bluetooth

How to connect 2 Playstation 4 Controller on PC Tutorial

bluedbluetoothhardware

I have two Playstation 4 Dualshock controllers and am thinking of getting two more. They have both bluetooth and usb connections, but prefer bluetooth to avoid cable salad and of course to be able to conveniently play games on the big screen from the couch. Am thus far unable to use both wirelessly at the same time.

How to connect and use both controllers using bluetooth at the same time?

Tested on macOS High Sierra and macOS Sierra on two separate 2015 model Macbooks.
Can pair with both controllers individually, if turning bluetooth off/on between.
Cannot connect with both at the same time.

As soon as one controller is connected, the other is basically ignored. As soon as the first controller is disconnected, the second one can be connected, and vice versa.

Would prefer not to use third-party software.

Note: using Apple’s Bluetooth Explorer I can reset the bluetooth stack, clear device caches, restart blued etcetera. This has not helped in this case, but am also not familiar enough with this advanced tool to know all the tricks.

Best Answer

I’ve so far been unable to use 2 PS4 Dualshock controllers over Bluetooth with my 2016 Macbook Pro running Mojave.

Pairing either one with my mac would make the other unable to pair. Renaming the Wireless Controller connection to something more decent did not help.

Note: all tested controllers were connected wirelessly via BT, games used were Cuphead and Knights & Bikes running on Steam.

The Way To Connect Both The Devices

First, unplug the PS4 controller from the console.

Secondly, press and hold down the Share and PS buttons together for approximately 3/4 seconds.

When your controller starts to blink white, stop pressing the button.

Now you can pair it with your device.

For Android-based devices, first, launch the Settings app. After that, tap on Bluetooth & device connection. Then, you have to tap on a pair of new devices at the top. When you will find your wireless controller, pair them.

You will be sure when the white light will stop blinking on your controller. Because it indicates that the Android device is finally paired with the controller.

How To Connect A New Ps4 Controller

Good news for all, this isnt a hard thing to do. Its as simple as getting the USB charging cable and connecting one end to the PS4, and the other to the PS4 controller.

Thats all you have to do. Make sure you let the controller fully charge before disconnecting it and then youre free to wander about your house to test the range on it.

If you ever have issues with your current controllers then charging them is often the answer, so always try that before you do anything else. That being said, there are fixes if things go awry too.

Connecting A Controller To Parsec

Using a controller to play games via the Parsec app is as simple as connecting it to your device. For a more in-depth look at the steps, check out the process below:

Launch Parsec.

Connect your controller via USB cable to your device.

Parsec automatically detects controllers when mounted to your computer.

If youd like to confirm your controller set-up or remap it, this is how you do it:

Go to Settings in the Parsec app or press the gear icon located in the left pane.

Select Gamepad to view your current connected controller.

Re-map buttons as desired.

Play a game.

These steps work with most controllers except for PS4 or Dual Shock 4 controllers. You can still use them, but unless youre on a Mac OS, you need to download this software first. Its an emulator that converts your PS4 controller into an Xbox 360 controller. More importantly, though, it enables the controller to play nicely with the app.

Mac OS users can simply connect a PS4 controller to their computer. The operating system and Parsec do the rest.

How To Personalize Your Controller With Ds4windows

How to Connect PS4 Controller to Android Phone

Now that you have your PS4 controller connected, you can also personalize your controller depending on your preferences. All you have to do is head over to the Profiles tab in the DS4Windows application.

Unlike personalizing your PS4 controller on Steam, you can do a whole lot customization with DS4Windows application, such as:

Naming your controller

Also Check: Use Ps4 Controller On Project 64

How To Sync A Ps4 Controller

If you are using a wired PS4 controller, follow these steps,

Turn on your PS4 console by pressing the power button.

Connect the opposite end of your PS4 controller wire to your console’s USB port.

Press and hold the PS button on your controller for around 3 seconds.

Finally, connect your wired PS4 controller to the console.

How To Connect Your Ps4 Controller

1. Turn on your console.

2. Plug the USB end of the cable for the controller into the console’s USB port, and then connect the other end to the controller. The ports are located on the front of the console and the top-center of the controller.

3. Press the PSbutton, located in the center of the controller. You’ll see a light appear on the back of the controller when it’s properly connected.

4. Once connected, you can unplug the cable and use your controller wirelessly assuming it’s charged.

Also Check: How To Remove Parental Controls On Ps4

How To Connect A Ps4 Controller To Other Devices

All other devices have a similar pairing mechanism, which starts as follows:

Make sure the light bar on the back of the controller is not illuminated. If it is, hold the PS button down until it goes off.

Make sure your controller is not connected to USB.

Press and hold the SHARE button and, at the same time, press down the PS button until the light bar starts to flash.

You will then need to continue using one of the sets of instructions below, depending on the device that youre connecting the controller to.

When pairing is complete, the light bar should turn to a solid colour.

6. Now click on the link below to jump straight to the instructions for the device you wish to connect the controller to:

iPhone or iPad

The Easier Way: Steam

This is how you connect 2 or more controllers to you PS4

If your favorite games are on Steam, they’ll work with the DualShock 4 with a quick tweak.

Go to the Settings menu in Steam .

Select the Controller menu.

Check the box marked “PlayStation Configuration Support.”

Connect the DualShock 4 to your PC.

Steam’s DualShock 4 compatibility is pretty hit-or-miss, and this technique obviously won’t work with non-Steam games. As a result, you may have better luck simply using DS4Windows.

You May Like: Project 64 Xbox 360 Controller Setup

How To Sync Additional Ps4 Controllers Wirelessly

Once you have at least one controller synced with your system, you can add more wirelessly:

With your synced controller, locate the Settings option in the row of icons above the PS4 home menu, represented by an icon that looks like a briefcase.

Navigate to Settings > Devices > Bluetooth Devices. You should see a list of devices presently synced with your console.

On the PS4 controller, you wish to sync, hold down the PS button and the button simultaneously for 5 seconds.

When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

How To Connect A Playstation 4 Controller To Your Pc

Windows 10 and Xbox are understandably great bedfellows, and it’s easy to use your Xbox controller across the two platforms. However, many people have a PlayStation 4 lying around, complete with a DualShock 4 controller. Whereas connecting the DS4 to a PC was once a bit of a nightmare, it’s now pretty easy thanks to better software integration. Here’s how to get the two working together and how to use the DS4 in a couple of different scenarios.

Using your PlayStation 4 controller with Steam

Also Check: Take Apart A Ps4

How To Connect A Ps4 Controller To A Pc

The following instructions are for Windows 10. If youre using a different version, your experience may vary.

Perform the initial instructions listed under How to connect a PS4 controller to other devices, above, to put the controller into pairing mode.

Now go into Settings -> Devices.

Ensure Bluetooth is switched on and then click on Add Bluetooth or other device.

If youre prompted to select the kind of device to add, choose Bluetooth.

A list of Bluetooth devices should appear, amongst them one named Wireless Controller.

It should now appear under a list of Mouse, keyboard & pen devices.

Option : Connect Via Usb

Turn on the PS4 using the button on the PlayStation itself .

Connect the USB cable to one of the PS4’s USB ports.

Connect the micro USB side of the cable to the micro USB port on your PS4 controller.

Press the round PlayStation button in the middle of your controller until the controller’s light bar glows blue.

How Many Bluetooth Controllers Can I Use At Once Mac

The official Bluetooth specifications say seven is the maximum number of Bluetooth devices that can be connected to your Mac at once. However, three to four devices is a practical limit, depending on the types of devices used. Some devices require more Bluetooth data, so theyre more demanding than other devices.

How To Connect An Xbox One Controller To A Mac

How to Connect My Xbox One Controller to My Mac 1 With an Xbox Wireless Controller, press the Xbox button to turn on the controller. Then press and hold the Connect button for a few seconds. 2 With a DUALSHOCK®4 Wireless Controller, press and hold the PS and Share buttons at the same time until the light bar begins to flash. See More.

You May Like: How Many Games Can A 1tb Ps4 Hold