Sunday, June 23, 2024

How To Repair Ps4 Controller

Don't Miss

Ps4 Controller Not Syncing

How to FIX ANALOG DRIFT in PS4 Controller! (100% Works!) (Cleaning Method)

How to sync PS4 controller?

Method 1: sync with USB cable.

  • Turn on PS4.
  • Connect the DS4 controller with PS4 with the official USB cable.
  • Wait for the light bar to pulsate.
  • Press the PS button on the controller and hold it for a few seconds.
  • Method 2: sync via Bluetooth.

  • Turn on PS4.
  • Select Settings -> Devices -> Bluetooth Devices.
  • Press & hold the and PS buttons for about 5 seconds.
  • Choose the controller from the Bluetooth Devices list.
  • Method 3: reset the DS4 controller and try again.

    What about the PS4 controller repair on DS4 controller light blinking orange or controller buttons sticking? Please .

    Solution : Replace Loose Or Worn Out Thumb Pads

    Weve already discussed how you can determine if your Controllers thumb pads are loose. If they are, here is how you can replace them:

    • Disassemble your PS4 Controller using a T8 or T9 screwdriver.
    • Check the thumb pad positions and if they are anomalously placed.
    • Remove the anomalously placed thumb pads or the worn-out ones.
    • Place the new thumb pads in place of the old ones and reinforce them in their position.
    • Reassemble the Controller and check if it has fixed the drifting.

    How To Reset Your Ps4 Controller

    1. Get a thin sharp implement A safety pin or a needle is ideal 2. Look at the back of the DS4 3. Find the small hole next to the left of the screw on the top right on the controller 4. Push your implement into the hole and hold it down for a few seconds 5. Repeat the steps on how to sync a PS4 controller

    Still not working?

    Theres a few things now that you could also try.

    1. Your mini-USB synching lead it faulty. Do you have a new one you could try? 2. Unplug the PS4, connect controller to USB and power if back up.

    Also Check: How Many Games Does 2tb Hold

    How To Fix Ps4 Controller Input Lag

    The PS4 is one of the most popular gaming consoles. It provides us with various amazing games that we can enjoy playing. The Dualshock controller helps us to enhance our gaming experience. Its important that your controller is connected properly without any interruption, as this will help you to achieve lag-less inputs while you are gaming.

    Its very annoying when there is an input lag on PS4. It completely ruins your gaming experience. There are very few users who face the input lag issues on their PS4 controller. If you are one of those users, then this article is for you.

    When Do You Need To Reset The Ps4 Controller

    How to fix PS4 Controller Analog Sticks

    Many PS4 users would ask that when to decide to reset the PS4 controller? Is there any sign/situation that second this decision? The answer is YES.

    You need to reset the PS4 controller when one of these signs appear:

    • PS4 Controller does actually work but it behaves weirdly and doesnt work as it should .
    • In the middle of playing your game or working on your application, the PS4 controller totally or partly stops responding, while the PS4 app/game you have run seems to be fine.
    • There is a power issue with the PS4 controller, such as that the battery doesnt fully charge and it lasts less than 4 hours, or it doesnt charge at all.
    • One of your two analog sticks start moving things onscreen when they shouldnt. Although the most likely cause of analog stick drift is dust, dirt and grime working its way into your controller, there are possibly some other reasons for this situation that can be fixed with a reset.

    These are the situations that will impel you to seriously consider PS4 controller reset.

    Now, lets learn here how to reset the PS4 controller and get it back working just like the time when you first used it.

    You May Like: Why Is My Ps4 Controller Flashing White

    How To Reset Ps4 Controller Soft Reset

    In this section, we will show you how to soft reset the PS4 controller. A soft reset generally refers to turning a device or a computer off and then on again, which can flush out memory and correct many issues. In order to perform a PS4 controller reset, you need to reset the connection between the controller and the console. But to do this, you need to prepare a working PS4 controller. If not, you need to navigate to the hard reset part.

    Now, we will show you how to soft reset a PS4 controller.

    1. Login in your working PS4 controller and navigate to the Settings.

    2. Then choose Device from the drop-down menu.

    3. Next, select Bluetooth Devices.

    4. Then you can see that all your PS4 controllers are listed here. Choose the abnormal one.

    5. Then press Options button on your controller, at the front to the touchpad.

    6. In the pop-up window, choose Forget device.

    7. After that, you have forgotten the malfunctioning PS4 controller. Then you can choose to turn off PS4.

    8. Use a USB cable to connect the inactive PS4 controller to your PC.

    9. Then turn on it and wait for it to boot up.

    10. Then log in it.

    Once all steps are finished, you have reset the PS4 controller and some system issues may be resolved.

    How To Fix Ps4 Controller Drift A Briefly Explain

    If you are a gamer, playing some of the popular games on PS4 is a dream come true. However, some things can ruin the experience of that dream, including the controller drift issue. It is frustrating when you are aiming for a headshot for a long time, and it does not go as planned due to the controller shift.

    Sometimes the game characters start to circle around like they have been possessed. It can both ruin the gameplay and experience of the games. So, if youre facing this issue, you need to address it as soon as possible. Whether you are using a PS4 or any other controller from PS4, it can happen to you.

    Most people are not that gentle with their controller and use it pretty aggressively. However, the issue happens due to the bad manufacturing of the company as well. So, lets jump to find the fixing methods to learn how to fix PS4 controller drift.

    Also Check: Is Rainbow Six Siege Crossplay Pc Ps4

    Separate The Chassis And Mainboard Meeting

    Flip the controller the wrong way up and separate the mainboard meeting from the highest half of the chassis. The friction-fit buttons and get in touch with pads within the prime half of the chassis might drop underneath gravity, so train warning whereas dealing with it.

    Now you can pop off the plastic thumbstick covers/grips to reveal the analog stick modules.

    You Might Not Need To Desolder Everything

    HOW TO: Easily repair the PS4 controller micro USB connector in your Playstation 4 controller

    The Alps Alpine branded analog sticks used in DualShock 4 wireless controllers can be split into three discrete components for the context of this repair: the main housing and two potentiometers. The former contains a spring-loaded joystick constrained along a two-axis gimbal mechanism.

    The loss of spring tension in this gimbal assembly is one of the two primary contributors of controller drift. The joystick will not return to the center position as the springs deteriorate over time. This can be verified by checking for play in the mechanism.

    Excessive play allows the joystick to be moved more than a few degrees off-axis before you can feel return pressure from the springs. Controller drift occurs when this axial play increases beyond the preset dead-zone threshold of the sensors.

    Related: How to Set Up and Use External Storage on Your PS4

    These sensors, or potentiometers to be precise, bring us to the remaining two physically distinct pieces of the analog stick assembly. Moving the joysticks rotates the two potentiometers, which record joystick movement along the X and Y axes. These components are the culprits in an overwhelming majority cases of controller drift.

    Potentiometers translate rotational motion into voltage signals by sliding one electrically conductive piece of metal across another one. This high-friction affair eventually wears out these sensors until they output faulty signals, which manifest as controller drift.

    Whats the point of this engineering lecture?

    Also Check: How To Dunk On 2k20 Ps4

    How To Fix Ps4 Controller Red Light Problem

    Seeing the PS4 controller red light keeps flashing is the most terrible problem and encountered by various PS4 users all of a sudden. The red light on the PS4 controller means that your controller is facing a problem due to a hardware failure, or a damaged USB port, broken or a faulty charger.

    You can fix the PS4 controller red light error by restarting the PlayStation 4 console, changing the controller ribbon cable, restarting the DualShock controller, etc. You will get detailed instructions in the below section.

    In this article you will get all the possible solutions to fix the PS4 controller red light wont turn off the problem. But before heading straight to the fixes, lets discuss What does the red light on the ps4 controller means and the common causes behind this issue?

    Let us begin

    How To Sync A Ps4 Controller Wirelessly

    1. On your PS4, go to Settings > Devices > Bluetooth Devices 2. Hold down the PS button and SHARE button on your controller at the same time 3. Keep them held down for approximately 5 seconds 4. Select the controller on the Bluetooth screen on your PS4 to complete the pairing.

    Still not working? Lets try resetting your PS4 controller

    Also Check: How To Turn On Cheats Sims 4 Ps4

    Ps4 Controller Issues Patched Up

    Now you know how to fix the most common PS4 controller issues. More specific problems, such as a button that stops working, unfortunately fall under the hardware fix solutions mentioned above.

    Hopefully, your issue was easy to fix. But if not, and you need to pick up a new PS4 controller, you have plenty of great options.

    Image Credit: Joeri Mostmans/Shutterstock

    Ps4 Controller Won’t Pair Or Connect

    PS4 Controller Schultertasten Reparieren / Fix / repair ...

    Normally, when you press the PS Button on your controller, it should turn on and connect to your system. However, when it’s not connecting, you’ll instead see the light bar on your controller flash for a bit, then turn off.

    This usually happens if you’ve used your DualShock 4 with another device. For instance, if you pair your PS4 controller with your PC or a friend’s console, it will remember that device going forward.

    You’ll need to re-pair your DualShock 4 with your own PS4 in these cases. To do this, connect your controller to your PS4 using a micro-USB cable. Make sure you’re using a high-quality cable that you know works properly.

    Related: Understand USB Cable Types and Which One to Use

    Press the PS Button on your controller for a moment, and the light should flash briefly before turning blue. This signifies that your controller has paired and connected successfully.

    If you have your DualShock 4 paired with another nearby device, like your phone or a PlayStation 5, doing this will likely turn on and connect the controller to that device. You should thus turn off and unplug whatever device your DualShock 4 is connected to first.

    After you re-pair your controller, you can disconnect the USB cable and use your controller wirelessly as normal. Your PS4 will remember it until you pair the controller with another device in the future.

    Also Check: How To Edit Faster In Fortnite Controller

    Ways To Fix Ps4 Controller Not Charging Issue

    Last Updated on by Rajeesh Nair

    If youre an ardent PS4 gamer, then you must know the value of a wireless PS4 controller in the overall gaming experience. Just imagine the scenario when your PS4 controller wont turn on and doesnt charge anymore. This is also the most common problems with the PS4 controller as it stops charging after regular usage. Well, we dont have one or two but 7 different solutions to fix PS4 controller not charging issue.

    There could be many reasons leading to the PS4 controller charging error. Hence, theres no straightforward solution for this issue. Let me share a few troubleshooting methods that would help you fix PS4 controller not charging issue.

    Use The Controller In Wired Mode

    Before you give up on the controller, you should try playing with it permanently connected via a USB cable. However, keep in mind that this only works for the revised model of PS4 controllers. You’ll know you have this model if there’s a light bar inside the touchpad on the front of your controller. If not, you can’t force wired communication.

    If you don’t already have one, purchase a long cable so you can still enjoy gaming from the couch. The Ailun three-pack of 10-foot micro-USB cables is a good cost-effective option.

    To force your PS4 to connect controllers over USB, head to Settings > Devices > Controllers > Communication Method and choose Use USB Cable. This will prevent the DualShock 4 from using Bluetooth, even when connected via USB.

    Also Check: How To Mod Your Gta 5 Account Ps4

    Remove The Battery Tray

    The battery tray isnt fastened down, so you can either use a plastic pry tool or your fingers to lift it off the four retention posts to expose the mainboard.

    It is now possible to desolder the components without physically separating the mainboard any further. Skip to Step 6 if you prefer to keep the mainboard assembly intact.

    Thermally Isolate The Structural Joints

    How To Fix Controller Drift PS4! PS4 Analog Stick Drift Easy Fix!

    Only four soldered joints stand between you and success, but these are nearly impossible to solder unless you have access to high-wattage JBC, Pace, or Hakko soldering stations.

    These are structural joints meant to securely anchor the analog stick to the PCB. This has the unfortunate side-effect of introducing the tremendous thermal mass of the metal casing housing the gimbal assembly.

    These joints act like massive heatsinks, so regular soldering irons cannot supply enough power to maintain the minimum tip temperature necessary to melt solder. This necessitates inordinately long dwell times which, in turn, increases the risk of PCB delamination and/or lifted pads.

    If the solder doesnt melt within three to four seconds, flip over the PCB and use sturdy flush cutters to sever these leads from the metal body from the opposite side. This will significantly reduce their thermal mass and make soldering easier.

    Read Also: Playstation Parental Controls

    Hard Reset Your Controller

    If removing and re-pairing the controller didn’t work, you can next try the full reset procedure for the DualShock 4. You’ll need a small pointed object, like a bent paper clip or a SIM card ejection tool, to do this.

    Turn off your PS4, then flip your controller over. You’ll see a small hole next to the screw by the L2 button . Use your pointed tool to press and hold the button inside this hole for roughly five seconds.

    Once you’ve done this, connect your controller to your PS4 again via USB cable and see if it pairs successfully.

    Fastidiously Pry Off The Potentiometers

    Flip over the PCB to pry the potentiometer from the primary analog stick housing. The module ought to come off simply. Dont try to pressure it out if its caught, as a result of that may elevate a pad. A tiny sliver of solder could be holding again one of many leads. Heating the offending pad with the soldering iron ought to launch it.

    Repeat this process for one more potentiometer. Skip to Step 13 in the event you solely want to exchange the potentiometers.

    You May Like: How Much Does A Ps4 Controller Cost At Walmart

    Causes Of Controlled Drift

    Before we jump to find out the fixes, lets learn some of the common causes of this issue.

    • One of the common causes of this issue is dirt and debris. If your controller is filled with dirt, then the chances are high that dust can enter between the gap of the analog stick and cause analog stick drift.
    • Many gamers use the PS4 controller aggressively and wonder what is causing it and how to fix drift on PS4 controller. Aggressive use can damage the potentiometer or analog stick.
    • Similar to the last one, if the controller falls accidentally, it can get damaged and cause this issue.

    Prevention: Avoid Common Causes Of Drift

    How To Fix A Broken PS4 Controller!

    The best way to prevent stick drift is to make sure your controller isnt passively exposed to stuff that might be floating in the air. Put it in a cupboard thats clean inside, to make sure your controller is basically living in a quarantine zone from The Last Of Us. You should also avoid drinking or eating while you play, since that can dirty your sticks quite easily. Its hard not to snack on peanuts while you are surveying an open world, but its necessary.

    All things considering, keeping your hands clean is a no-brainer here, but you dont need to use hand sanitizer whenever you pick up your controller. Just make sure you are exercising a moderate level of care for your controller, even when you are not using it.

    Read Also: Why Is My Ps4 Controller Flashing White

    You May Like: How To Make Another Playstation Network Account

    How To Fix Ps4 Controller Drift With These Easy Methods

    Isnt it annoying that you perfectly line up your aim for a headshot with your PS4 controller and it just shifts randomly? Or the player goes in wild circles as if it has been possessed by something. We in that case you might be facing a PS4 controller drift issue.

    The issue can happen on any PS 4 controller whether its the DualShock 4 or any other controller for that matter. We are pretty careless with our gaming consoles and controllers and normal wear and tear are expected given that most people use the controllers very aggressively.

    In this article, I will show you how you can fix the PS4 controller drift using some easy steps and methods.

    Content Table

    More articles

    Popular Articles