How To Setup Ps4 Controller

Sync Your Ps4 Controller Wirelessly

If you lost your USB cable and you dont want to buy a new one, you can sync your PS4 controller wirelessly.

1) On your PS4 dashboard, go to Settings > Devices > Bluetooth Devices .

2) On your PS4 controller , hold down the and the PS button. Hold them down for around 5 seconds.

3) Your PS4 controller should then show up in the Bluetooth Devices screen. Select it.

4) Now your PS 4 controller should be syncing with your console.

How To Connect A Ps4 Controller To Steam

This article was written by Darlene Antonelli, MA. Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field. She earned an MA in Writing from Rowan University in 2012 and wrote her thesis on online communities and the personalities curated in such communities. This article has been viewed 26,632 times.

This wikiHow will teach you how to connect a PlayStation 4 controller to your computer so you can use it to play Steam games. You can connect your controller wirelessly with Bluetooth or by using a USB cable.

Connect Wired Ps4 Controller To Ps4

If you have a wired PS4 controller youre connecting for the first time, follow these steps:

The controller comes with a 2.0 Micro-B cable, but you can use any USB 2.0 Micro-B cable to sync your wired controller.

Don’t Miss: How To Do Cool Dunks In Nba 2k16

Connect Wireless Controller To Ps4

For wireless PS4 controllers, use these instructions to connect to your console.

Youll only need the USB 2.0 Micro-B cable to sync the first wireless controllers to your console. While you can continue to add controllers using the method described above and setting them to the New User on the dashboard, there is also a way to sync PS4 controllers wirelessly after the first one has been set up.

Can A Ps4 Controller Be Used To Play Non

Your PS4 DualShock 4 controller can also be used to play games outside Steam client. This is where the DS4Windows comes handy as it can trick Windows 10 OS that youre using an Xbox controller even when what you have is a DualShock 4 controller.

Simply follow the instructions provided above on how to download, install, and configure DS4Windows.

Also Check: Ps4 Turn Off Recording Notification

Perform A Hard Reset On Your Controller

If re-pairing the controller doesnt work, the issue might be with the controller itself and not the PS4. In that case, youll need to reset the controller. Youll need an unfolded paper clip with which to push a hidden button on your PS4 to reset it.

Turn off your PS4 and unplug both it and your internet router or modem so that your controller wont receive any network signals when you reset it. When thats done, flip the controller over and look for a small hole on the right side. Push the paperclip in the hole and push the button inside for three to five seconds. Its best to hold it down for a count of 10 to be sure.

When youve done that, plug in both your router and your PS4 again. Turn on the PS4, then plug your controller into the USB cable. That should re-pair the controller from scratch. If it doesnt work, you may have a broken controller on your hands.

Connect Your Wireless Controllers To Ps4 Without Usb Cable

If you want to add a second or more wireless controllers to your PS4 console, but you dont have the USB cable, you still can connect them without the USB cable. Here is how to do it:

1) On your PS4 dashboard, go to Settings > Devices > Bluetooth Devices .

2) On your PS4 controller , hold down the button and the PS button for around 5 seconds.

3) Your PS4 controller should then show up in the Bluetooth Devices screen. Select it.

4) Your PS4 controller should then be connected to your console now. Enjoy your games.

Recommended Reading: How To Connect Wireless Headset To Ps4

How Do You Connect A Ps4 Controller

The first video game controller came with the first commercial game console for the home, the Magnavox Odyssey 100. It had one dial for horizontal movement and one for vertical.

Controllers have become far more complex since then. So complex that even setting them up can be difficult. We imagine thats why our techs are often answering the simple question: how do you connect a PS4 controller?

How you connect a PS4 controller will depend on whether youre connecting a wired or wireless controller as well as how many controllers are already connected. Follow the instructions below accordingly to get these important PS4 accessories set up and ready to go.

How To Fix Connection Issues On Your Ps4 Controller

Double-check the controller is actually charged. Thats the first port of call here. After that, and if it doesnt work, you can try repairing your controller.

Just go to Settings, Devices, Bluetooth Devices, and then select the controller, and choose Forget Device. You can then reconnect it via the USB cable and it will hopefully work.

These issues are likely to only affect wireless play, so dont worry too much if youre happy to play with a wired controller anyway. You can even get some nice long USB cables if youre happy to go third-party.

Recommended Reading: Ps4 Boots Into Safe Mode

Using The Wireless Controller

Press the PS button on the controller, and then select a user.

• The first time you use a controller, you’ll need to pair it with your PS4 system.
• Up to four controllers can be used at the same time. When you press the PS button, the light bar will glow in a uniquely assigned color. The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

How To Pair A Dualshock 4 With An Iphone Or Ipad

Hold both of these buttons down at the same time for about two seconds.

Read Also: Project 64 Controller Plugins Xbox One

Make Sure The Controller Is Charged

When youre having trouble with a controller not working wirelessly with your PS4, the usual issue with pairing is that the controllers battery is undercharged. If it sounds like the unplug it and then plug it back in solution to the problem, it is.

Make sure the controller is charging when you plug it in when its not in use, youll see the light bar on the top turn yellow. If its not charging, you might have another issue, like a damaged controller port or a bad cable.

How To Connect Your Ps4 Controller Via Bluetooth

If you followed the Bluetooth installation steps above, you should be able to use your controller wirelessly. Luckily, you don’t have to pair your controller every time you want to use it. As long as you don’t unplug the adapter, it will save its last connection, so you can just tap your controller’s central PlayStation button to reconnect it.

The official Sony DualShock 4 USB wireless adapter is the simplest Bluetooth option. You may have to hunt for it or spend a little more than you would on a standard Bluetooth dongle, but it’s worth it for its out-of-the-box functionality.

Recommended Reading: How To Hook Up Ps4 Controller To Phone

Connect The Ps4 Controller To Your Pc Via Bluetooth

One of the best things about using the PS4 DualShock 4 controller on your PC is that you can use it wirelessly, giving you far more flexibility when gaming.

The PS4 DualShock 4 controller uses Bluetooth, so you’ll need to make sure your PC or laptop has a Bluetooth receiver built in. If it doesn’t, you can buy a Bluetooth USB dongle such as the Tiny USB 2.0 Bluetooth Mini Wireless Adapter not only is this small enough to be plugged unobtrusively into your PC, it’s also pretty cheap at just £2.99 .

To connect the PS4 controller via Bluetooth, press and hold the central PS Button and the Share button for three seconds until the lightbar at the top of the controller begins to flash.

Next open up the Bluetooth settings on your PC. In Windows 10, click on the speech bubble icon in the Taskbar at the bottom-right corner of your screen. This opens up the Action Center from there click ‘Bluetooth’ and then select ‘Wireless Controller’.

You may be asked to enter a pair code if so type in 0000. The PS4 DualShock controller will now be connected wirelessly to your PC.

Image credits: TechRadar

Ps4 Controller Firmware Download

Products · ps5/ps4/ps3 · sniper ras1ution converters x one adapter ps4 battery pack fighting board controllers all . Download the file by clicking on the appropriate download button below. Remove your instrument controller from your apple . How to pair to a ps4 console · how to clean a raiju controller · software & downloads | manuals| product warranty | product faqs. You to get the best experience while using a dualshock 4 on your pc.

Read Also: How To Remove Parental Controls On Ps4

Switch On The Controller

Press and hold the PlayStation button in the middle of the DualShock 4 pad until the light flashes. If it’s worked, the PS5 should ask you whos using the gamepad.

The PS4 pad has now been paired to the PS5 and you shouldnt need to follow this step again. You can even turn on the PS5 by holding down the PlayStation button, just as you would with a DualSense pad.

Xbox One Bluetooth Pairing

Before you begin make sure your Xbox One controller is unpaired from any other devices. You can do this by simply connecting the controller to a Windows PC using a USB cable and wait until the Xbox Buttonchanges to solid WHITE. Once that is done, turn the controller off .

Always test your controller in-game to make sure you have full functionality before attempting to use any GPC Scripts or GamePacks.

Find more detailed information about Xbox One Controllers here:

You May Like: How To Connect Ps4 Controller To Pc Bluetooth

How To Connect Ps4 Controller To Windows 10 Pc

• User

Gaming on a PC doesnt mean youre forced to use a keyboard. A Windows 10 system supports game controllers, but youll find most users prefer an Xbox controller since compatibility isnt a problem. That said, there are still players who prefer to use a PlayStation controller over an Xbox one.

It might be a matter of personal choice, or it might just be what they have on-hand. Connectivity-wise, PlayStation controllers connect to a Windows 10 machine almost as easily as an Xbox controller does, but there are a few exceptions.

Connect Your New Ps4 Controller To Ps4 With Usb Cable

If youre using a wired PS4 controller, follow these:

1) Press the power button on your PS4 console to turn it on.

2) Plug the other end of your PS4 controller wire into the USB port of your console.

3) Press the PS button of your controller and hold it down for around 3 seconds.

4) Your wired PS4 controller should then be connected to the console.

If youre using wireless PS4 controllers, follow these:

1) Press the power button on your PS4 console to turn it on.

2) Connect the micro connector of your USB cable to your PS4 controller. You can find the mini USB port on the back of your controller.

3) Plug the other end of your USB cable into the console.

4) Press the PS button of your controller and hold it down for around 3 seconds.

5) Your wired PS4 controller should then be connected to the console. You can unplug the USB cable and enjoy your games wirelessly now.

6) If you want to add a second or more wireless controllers, just use the same USB cable follow these same steps, and set it to be the New User on your dashboard.

You May Like: Ds4 Dolphin Emulator

Known Issues With The Dualshock 4 And Apple Tv

Unfortunately, there are some well-documented issues with the Apple TV and DualShock 4, though its unclear whether these issues affect only certain revisions of hardware. Many people report that the DualShock 4 disconnects during use for seemingly no reason, with no word from Apple or Sony on a fix.

If you encounter this issue, theres no real resolution. You might want to try restarting your Apple TV, which you can do by pulling the plug , or by pressing and holding the Menu and Home buttons on the remote until the LED status light blinks on the front of the unit.

While playing, make sure you dont stray too far from the Apple TV and that the unit isnt hidden behind anything that might cause interference. If you suspect wireless interference from other Bluetooth devices, try relocating those devices to see whether the problem is resolved.

Use Ps4 Controller On Steam

So with your PS4 controller now registered for Windows, for Steam to acknowledge it, open Steam, which will automatically convert your PS4 controller to work with your games, even if theyre designed to work with Xbox controllers.

You can even use your PS4 controller with games that dont officially support gamepads. To do this, open Big Picture mode , go to Settings -> Controller Settings and switch on PS4 Configuration Support.

In Big Picture mode, select a game in your library that doesnt support controllers, go to Manage Game in the pane on the left, then Controller Configuration. Here youll be able to set up bespoke PS4 controls for your keyboard-and-mouse game. Roll on the big-screen gamepad sessions of Civilization or Elder Scrolls III: Morrowind!

And thats it! Youre now using the best gamepad in the world on the best gaming platform in the world. And what better way to celebrate by using it to play PS1 games on your PC or, if your PC can handle it, play PS3 games on your PC.

Content Manager at Make Tech Easier. Enjoys Android, Windows, and tinkering with retro console emulation to breaking point.

Also Check: Game Sharing Playstation Plus

How To Connect Ps4 Controller To Ps5

ByAlan Martin 07 May 2021

Here’s how to connect your PS4 controller to a PS5 so you can use it with your new console

There are several reasons why you might want to know how to connect a PS4 controller to PS5. For starters, you might have been put off buying a second PS5 DualSense pad by the price or reliability scares. And you also might want one if you plan to play certain PSVR games on the PS5.

The good news is that you can use a PS4 controller with a PS5, and in this tutorial well show you how to connect and disconnect your spare DualShock 4 pad.

Before we begin though, you should know of the one big limitation: you cant use a PS4 pad to play PS5 games. This is especially infuriating as Sony lets you do just that when streaming your PS5 games to another device, but there we are.

• PS5 vs. Xbox Series X: Which console wins?

So why would you want to use a PS4 pad with your PS5? Backwards compatibility. While the DualSense pad will work with all PS4 games , connecting a second DualShock 4 pad will allow you to play local multiplayer PS4 games on your PS5 without buying additional hardware. In my house, this has proved invaluable for splitscreen Rocket League, and cooperative exploration in Spelunky 2.

So without further ado, heres how to connect a PS4 controller to PS5.