How To Use A Ps4 Controller On Switch

How To Use A Ps5 Dualsense Controller On Switch

Play Switch games with a far more comfortable controller.

Let’s be honest, while the Nintendo Switch Joy-Cons are great for quick multiplayer, they aren’t the best option for playing Nintendo Switch games for long stretches. My fingers tend to go numb while grasping them for too long. If you don’t like the feel of these small gamepads, then there’s always the Switch Pro Controller, but that’s rather expensive. The good news is if you already have a PS5 lying around, you can use a PS5 DualSense controller on Switch. All you need is a wireless adapter.

Other Nintendo Switch Controllers

If the PS5 DualSense Controller and the adapter are a bit too expensive, be sure to check out some of the other best Nintendo Switch controllers. Many of these are much less expensive than the PS5 DualSense, but they still feel great in your hands.

The most popular Nintendo Switch gamepad is the Pro Controller. It is a bit pricey with an MSRP of $70, but you can often find it selling for less on places like Amazon, Walmart, and Best Buy. It features amiibo scanning, rumble, motion controls, and it has a great shape and heft to it.

How To Use A Ps4 Controller On Switch

If your DualShock 4 is synced with a PlayStation 4 console, unplug the console before you begin so it doesn’t interfere with the Switch adapter.

To use a Playstation official DualShock 4 controller with your Nintendo Switch, follow these steps:

Don’t Miss: How To Get Infinite Money In Sims 4 Ps4

How Do You Connect A Ps4 Controller On Switch

You only need to plug the third-party Bluetooth adapter into the dock once youve taken care of it to connect your PS4 controller to your Nintendo Switch.

Note: before connecting to the dock, make sure that there is no PS4-DualShock controller sync. If not, interference might happen.

You can synchronize your controller with the Nintendo Switch by following the instructions in this guide, which you can find here:

• Plug in the USB wireless adapter into a USB port in the dock
• Place the Nintendo Switch in the dock and turn it on
• Wake the Switch up using a Joy-Con controller and press L+R to pair both Joy-Cons with the console

• Go to the Nintendo Home screen and select System Settings
• Select Controllers and Sensors
• Select Pro Controller Wired Communication
• Push the Pairing button on your wireless adapter
• Get your PS4 controller and hold down the PS button and at the same time. If the light on the controller starts blinking, it means that its in pairing mode
• Once the PS4 controller light stops blinking and turns blue, thats an indication that its paired successfully with the USB wireless adapter

Using A Ps4 Wireless Controller On Nintendo Switch Needs Bluetooth Adapter

In order to use a PS4 Dualshock controller with your Switch, you will need to get a Bluetooth adapter.

The Nintendo Switchs Bluetooth capability is reserved primarily for its Joy-Cons only. This means that you need to have another Bluetooth adapter so your PS4 controller can talk with the console.

Theres no specific Bluetooth adapter that Nintendo recommends but some of the known brands that work seamlessly with the Switch are 8bitdo and Mayflash.

Also Check: What The Ps5 Look Like

Alternative: How To Go Usb

Its also possible to skip over the Bluetooth wireless connection and play with your DualShock 4 as a wired controller, with a USB-enabled connection. Thats obviously not ideal when you could potentially play wirelessly, but its a potential workaround when connectivity and signal issues persist. You can set a controller to only communicate with the PS4 via USB when its plugged in by changing the controller settings in the Devices menu, as noted above. Under Devices, navigate to Controllers, and then set any controllers to only communicate via USB when theyre plugged in. That way, signal issues or Bluetooth problems shouldnt affect the controller, so long as youve got a wired connection.

Thinking about upgrading to the PS5? Take a look at our guide to see how the PS4 and PS5 compare.

Editors’ Recommendations

Known Issues And Limitations

• Non-Switch controllers cannot be used to wake the system from sleep.
• Controllers using the Bluetooth LE standard are currently not supported and will not connect to the system.
• Xbox One, Wii/WiiU and some Dualshock v1 controllers can take some time to be detected and subsequently pair with the Console. Be patient and re-enter the sync mode of the controller several times if neccessary. Once synced, controllers should work as usual.
• Xbox One controllers cannot be shut off and will attempt to reconnect to the console after being disconnected. This is a limitation of the controller’s bluetooth firmware.
• Xbox One button layout was changed at some point in a firmware update. Please ensure your controller firmware is up to date if you have issues with incorrect button mappings. Both layouts are now supported.
• Reported controller battery levels may not be correct. I’m relying entirely on reverse engineering notes found on the internet for these. In many cases I don’t own the controller and there is simply no information available, so these controllers will always show full battery. Any help in improving this is most welcome.
• Several users have reported knockoff WiiU and Dualshock4 controllers that cannot be detected by the console during Bluetooth discovery. Unfortunately I think they’re using an incompatible Bluetooth chipset.

Also Check: How To Hook Up Ps4 To Pc

How Do I Connect My Ps4 Controller To My Iphone

Go to Settings, and then Bluetooth Settings on your iPhone or iPad. Press and hold the PS and Share button until the light bar starts to flash. When the PS4 controller flashes white its in pairing mode and should appear under Other Devices section in Bluetooth settings. Select the controller in settings to pair it.

Is A Bluetooth Adapter Necessary

If you are going to use a PS4 Dualshock controller with your Switch, you will need to get a Bluetooth adapter.

However, you wont be able to use the adapter that links the Joy-Cons to the console. Since it was created specifically for the latter. So you need a different adapter to connect the DualShock.

Nintendo doesnt recommend any particular Bluetooth adapter, but 8bitdo and Mayflash are two well-known brands that are compatible with the Switch.

Read Also: How To Use An External Hard Drive On Ps4

Nintendo Switch Console Supports Third Party Controllers

If you dont know this yet, its a fact that the Nintendo Switch is a very versatile console, specifically in terms of interoperability with other controllers. It supports first party Nintendo controllers as well as those of its competitors .

If you want to stick with Nintendo platforms, you can use your old GameCube controller with your Switch as long as you have the necessary adapter for Wii U. If you dont have the default Nintendo adapter, third party adapters can also work fine.

With the popularity of its rivals like the PS4 and Xbox One, it really makes sense for Nintendo to make their console adaptable by supporting third party controllers like the PS4 DualShock and the Xbox One controllers. If you are into fighting games, youll also be pleased to know that you can use specialized arcade fight sticks with the Switch too.

How To Connect Controller To Switch Without Adapter

To connect a controller to a Switch without an adapter, you will need to use a USB cable. First, make sure that the Switch is turned off. Then, connect the controller to the Switch using the USB cable. Finally, turn on the Switch. The controller should now be connected.

In terms of sales, the Nintendo Switch is one of the companys most popular consoles. Consoles other than this one are lacking in terms of a unique gaming experience. There is no need to attach an Xbox 360 controller to a Nintendo switch. Both controllers have Bluetooth connectivity, so simply pair them together.

Don’t Miss: How To Play Ps1 Games On Ps4

How To Use Controller For Switch

In order to use a controller for Switch, you will need to first connect the controller to the Switch console via the USB port. Once the controller is connected, you will need to press the power button on the Switch console to turn it on. After the Switch console is on, you will need to press the sync button on the controller, which is located on the top of the controller near the left shoulder button. Once the controller is synced, you will be able to use it to play games on the Switch console.

With a small controller, its difficult to use the Joy-Cons on the Nintendo Switch. Your PS4 controller can be linked to your Nintendo Switch using a wireless adapter. It is specifically designed for the Switch and can be used as a wireless adapter. This gaming device is more ergonomic than other products in its category and is based on traditional gamepads. If you dont already have one, you can get one for a reasonable price on Amazon. This could be the key to enjoying the Switchs amazing games. If you want to upgrade your controller to the PlayStation 5 or Xbox One S/X, you can find guides for both.

How To Use Wireless Controllers On Nintendo Switch

To use a wireless controller, you must first connect the Nintendo Switch system to your computer, then charge the controllers before using them. The Nintendo Switch system should be turned off by pressing and holding the power button until it turns off. By pressing and holding the left Joy-Con button until the system starts up, it will detect and turn on controllers automatically. If you are using an alternate controller that does not currently have pairing, you can do so by pressing the Joy-Con button until the system turns off. After docking, press and release the left Joy-Con button until the system turns on and the controller is automatically detected.

Read Also: How To Activate Primary Ps4 From Website

Limitations Of Using A Ps4 Or Xbox Controller With The Switch

Unfortunately, it’s not possible to wake up the Switch from sleep mode with a non-Nintendo controller, so you’ll still need a pair of Joy-Cons. You may also have to occasionally undock your Switch and put it back in to get the adapter to recognize other controllers. That said, since both Joy-Cons still work while the PS4 controller is connected, you can play multiplayer games with your PS4 controller.

The button mapping is intuitive, although it’s important to note that pressing the PS4 controller touchpad will take screenshots. The button on the DualShock 4 is also mapped to the minus button on the Joy-Con.

Dualshock 4 Wireless Controller Support

Find out how to pair and charge a DUALSHOCK®4 wireless controller with your PlayStation®5 console or PlayStation®4 console, and how to change controller settings.

How to pair your controller with a PS4 console or PS5 console

• If your controller is turned off, press the PS button. After the light bar blinks, the player indicator lights up.
• When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly.
• Please note, your controller can pair with only one console at a time. When you want to use your controller on another console, you’ll need to pair it with that console.
• You can use up to 4 controllers at the same time. When you press the PS button, a color is assigned to each player.
• If youre having issues pairing your controller with your console, please visit PlayStation Repairs.

How to connect a DUALSHOCK 4 wireless controller with other devices

You can use your controller away from your console. Find out more about compatible devices, applications, and feature support by visiting the guide below.

How to charge a DUALSHOCK 4 wireless controller in rest mode

To charge your controller while your console is in rest mode:

Select your console below.

You May Like: How To Fix Playstation Controller

Easy Steps To Use A Ps4 Controller On Nintendo Switch

While the Switch Joy-Cons work great with a wide host of games, some gamers may find that its small size may get uncomfortable for long plays. The good thing is, the Nintendo Switch supports other controllers like that PS4 controller and Xbox One controller so if youre into one of those, all you need is to set it up with the console. If you want to use a PS4 controller with your Switch, follow the steps in this guide.

* If you buy through links on our site, we may earn an affiliate commission. For more details, please visit our Privacy policy page.

Install The Driver Software

Once youve connected your PS4 controller to your computer, download the driver software from Sonys website. This will allow your system to recognize the device. Once youve successfully installed it, open up the software that came with it so that you can configure it for use with Windows. This will also allow you to change which buttons are mapped as well as set up macros for certain key presses so that pressing one button will trigger multiple actions or inputs.

Recommended Reading: Will You Be Able To Play Ps4 Games On Ps5

Things To Consider When Using Playstation Controllers On Switch

It is worth noting that your PlayStation controllers will not work exactly as they, or your Joy-Con controllers, would do under normal circumstances.

Haptic feedback and the in-handset microphone won’t work with the PlayStation controllers while playing on your Nintendo Switch, and when waking up your Switch, you will still have to use your Joy-Con. Also, be aware that the USB Wireless Adapter will keep your connected controller powered on, with the sleep function no longer working, so make sure to turn it off, or you risk your controller dying quickly. On the plus side, the PlayStation touchpad works as a screenshot button, and the gyro will still function.

This method works perfectly for both the original Nintendo Switch and the Switch OLED. However, it will not work for the Nintendo Switch Lite .

To connect a DualShock 4 or DualSense to a Nintendo Switch Lite you will also have to purchase a USB-C to USB adapter and use your wireless USB adapter through that instead. Following the step-by-step guide above, you should be able to play your Nintendo Switch Lite with the PlayStation controller of your choice.

Can I Plug My Ps4 Controller Into My Switch

While the Switch Pro controller is directly compatible with the Nintendo Switch, any PlayStation DualShock 4 controller can be linked with the device using a wireless adapter.

Of course, Nintendo doesnt sell an official adapter for third-party controllers, but a reliable alternative has been developed by 8bitdo.

Read Also: How To Pair Ps4 Controller To Mac

Comfort From Your Very Own Couch

Connecting controllers to your Nintendo Switch is easy â it’s remembering where the X button is that’s the hard part. Once you’ve got an adapter of your choosing, connecting is a breeze. For those who need something bigger than the Joy-Con controllers that come with the Nintendo Switch, this may be the key to enjoying the great games that the Switch has to offer.

If you’ve upgraded to the PS5, check out our guide for connecting your DualShock PS5 Controller to your Switch. If you’re more of an Xbox fan, we also have a guide for connecting your Xbox One S/X controller with Nintendo Switch consoles.

How To Play Your Nintendo Switch With A Ps4 Controller

Some controllers just feel like home. If you prefer the layout and feel of your PS4 controller, it makes sense that you would want to use it for all of your gaming endeavors. In the past, gamers were limited to OEM and third-party controllers that were made for specific consoles.

Today, those lines are being blurred. With just a little bit of effort and a handy little device, you can play Nintendo Switch with your PlayStation 4 controller.

Its always nice to have options, and you dont need to modify your console or controller in any way, so why not give it a shot? Follow these easy instructions to use your Sony PS4 controller with your Nintendo Switch.

You May Like: How To Use Ps4 Controller On Android

Play Switch Games The Way You Want To Play Them

Whether youre suffering from the dreaded Joy-Con drift, have hands too big for the undocked Switch controller, or just happen to prefer the PlayStation Controller, then the option is there. Of course, if its the size or shape of the Joy-Con that is the issue, there are plenty of other Switch controllers to consider using instead.