Install The Ds4 Driver
Click on Step 1: Install the DS4 Driver button to install the needed PS4 drivers on your Windows 8.1 OS and later computer.
Click on Step 2: If on Windows 7 or below, Install 360 Driver button only if you have a Windows 7 or older OS since this OS doesnt come with the 360 drivers needed to run the DS4 drivers correctly by default. Otherwise, skip it and proceed to the next step below.
How To Pair A Ps4 Controller
Mahesh Makvana
Mahesh Makvana is a freelance tech writer who specializes in writing how-to guides. He has been writing tech tutorials for over a decade now. Hes written for some of the prominent tech sites including MakeUseOf, MakeTechEasier, and Online Tech Tips. Read more…
Ps4 Controller Keeps Disconnecting
If your DualShock 4 disconnects randomly while playing, there are a couple of remedies you can try.
First, make sure your controller battery is charged. It sounds simple, but if the battery in your controller is almost dead, it may disconnect. To check your controller battery life, hold the PS Button to bring up the Quick Menu on the left side of the screen. You’ll see a controller icon with battery life displayed at the bottom.
Plug your controller into your PS4 and visit the Quick Menu again to make sure you see the battery charging animation. After your controller charges for some time, try using it as normal.
If the battery wasn’t causing your PS4 controller issue, make sure you aren’t trying to use your controller too far away from your system. The typical range for Bluetooth is around 30 feet depending on your setup, you may be able to use your controller further than this, or be restricted to using it closer.
Speaking of this, you should try to minimize interference between your controller and console. Remove any metal objects between the two, like shelving or laptops, that could inhibit the signal. You should also take your PS4 out of enclosed spaces, if applicable, for better signal transmission and reception.
Read Also: How To Register Ps4 Controller
What Is This Ps4 Issue
Even though the reasons might vary, it seems that the most likely cause of this error is an error within the driver for the Bluetooth PS4 controller.
These solutions will also help you if you have one of the following issues:
- Wireless controller driver error
- PS4 controller not connecting to PC
- PS4 controller wont connect to PC
- Bluetooth PC not detecting PS4 controller
In this article, we will explore some of the best methods to deal with this issue, and get back to playing your favorite games on Windows 10 using a PS4 controller. Read on to find out more.
Issue : No Vibrations On The Ps4 Controller
Your DualShock 4 controller vibrates during certain actions in certain games. If that doesnt happen, your console has likely turned off the feature.
You can re-enable the vibrations option by heading into Settings > Devices > Controller on your PS4 and activating Enable Vibration.
And thats it.
Besides controllers, did you know you can manage your PS4 with your phone? Check out our guide to learn how to set that up.
Also Check: Can Ps4 Play 4k Ultra Hd
How Do I Connect My Ps4 Controller To My Pc Without Bluetooth
If Bluetooth is not for you, you can connect your DualShock PS4 controller to your PC via USB. To do so, all you need is a micro USB cable .
The next step is to go for a platform that offers native support for PS4 controllers such as Steam or use a third-party app like DS4Windows that will allow your computer to recognize your DualShock controller.
Since we already explained how to use the latter, we will not focus on how to connect the PS4 controller to the PC without bluetooth via Steam.
In this article, we explored some of the best troubleshooting methods to deal with the issue caused by your PS4 controller driver error on Windows 10.
Please make sure to let us know if this guide helped you solve your issue. You can do so by using the comment section below.
Troubleshooting: Ps4 Wireless Connectivity Problems
If your controller wont turn on when you hit the PS button, plug it into the PS4 to make sure it has a charge. If the light bar doesn’t glow, it could be a problem with your USB cable, or the controller’s internal battery could be damaged. If you have an extra cable handy, try using that instead to eliminate the first possibility.
If the controller can’t connect to the console wirelessly even though it is charged, then the problem lies with either your console or your controller’s Bluetooth connectivity. If your other PS4 controllers are working wirelessly, the faulty controller is to blame. Nonetheless, you can continue playing with the controller connected to the console via a USB.
If you’re unable to pair a PS4 controller with your console, try resetting it.
You May Like: What Year Did The Original Playstation Come Out
How To Hard Reset Your Controller
If re-pairing the controller doesnt work, the issue might be with the controller itself and not the PS4. In that case, youll need to reset the controller. Youll need an unfolded paper clip with which to push a hidden button on your PS4 controller to reset it.
Step 1: Turn off your PS4 and unplug both it and your internet router or modem so that your controller wont receive any network signals when you reset it.
Step 2: When thats done, flip the controller over and look for a small hole on the right side. Push the paperclip in the hole and push the button inside for three to five seconds. Its best to hold it down for a count of 10 to be sure.
Pair Your Ps4 Controller Using Ds4windows
Also Check: What Is Going On With Playstation Network
How To Sync Additional Ps4 Controllers Wirelessly
Once you have at least one controller synced with your system, you can add more wirelessly:
With your synced controller, locate the Settings option in the row of icons above the PS4 home menu, represented by an icon that looks like a briefcase.
Navigate to Settings > Devices > Bluetooth Devices. You should see a list of devices presently synced with your console.
On the PS4 controller, you wish to sync, hold down the PS button and the button simultaneously for 5 seconds.
When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.
Ensure The Controller Has Battery
If your wireless PS5/PS4 controller cant connect or disconnects randomly, ensure it has battery power:
If the controller is charging, wait for an hour. Then, press the PS button to pair the controller and unplug the cable.
Also Check: Is It Possible To Connect Airpods To Ps4
Connect Ps4 Controller To Ps4 Wirelessly
Here is how to connect a PS4 controller to PS4 without a USB cable.
Step 1: Power on your PS4 and then go to the path: Settings> Devices> Bluetooth Devices.
Step 2: Press the button and the PSbutton on your PS4 controller for about 5 seconds.
Step 3: Look back at the Bluetooth Devices screen on your PS4, and you will see the PS4 controller listed on the screen.
Step 4: Select the controller.
Now the PS4 controller should be connected to your PS4 successfully, and you can start enjoying games on your PS4.
Reconnect The Controller After Using It On Another Device
Every time you use the controller on another device, you need to re-sync the peripheral to the console.
The steps are the same I shared above:
If it doesnt work, try this
Don’t Miss: How To Connect Ps4 Controller To Pc Via Bluetooth
Use The Ds4windows App To Fix The Ps4 Controller Driver Error
There are other great driver repair and updating tools that you could try on the market, most of which only need to be launched to already trigger a full system scan for faulty drivers.
Making Your Ps4 Controller Discoverable
Pair your DualShock4 controller with your Bluetooth dongle by making your PS4 controller discoverable. To do this, press the and the PlayStation button for three seconds, or until the light bar at the top of the controller shows a double blinking pattern.
Note: if the PS4 system your controller is synced to is still plugged up, then your controller might try to connect to it if you press the PS button.
You May Like: How To Double Clutch In Gta 5 Ps4
Ps4 Controller Wont Connect To Ps4 With Usb
Some PS4 users reported that PS4 controller wont connect to PS4 with USB. How to cope with the issue? This post analyzes the reasons for the issue and guides you through the solutions. If you want solutions to other PS4 issues, please visit MiniTool Partition Wizard.
Sony allows you to use a PS4 controller together with your PS4 via a wired or wireless connection. However, lots of PS4 users reported that they cant connect to PS4 with USB. Why does the issue appear? How to cope with the issue? Keep reading.
The issue PS4 controller wont connect PS4 with USB happens when the USB connection is loose or some devices do not work such as the USB port and the USB cable. Now follow the instructions below to figure out which case you are in.
How To Resync A Ps4 Controller
Controller giving you problems by not syncing up to your PlayStation correctly? Luckily, DualShock 4 controllers are made so that players can resync their controllers with extreme ease, thanks to a tiny hole on the back of the controller. So if your controller isn’t connecting, this is the best way to try and fix it, barring the use of a USB cable all of the time because no one wants to be tethered to their console when they don’t need to be.
You May Like: Is Minecraft Cross Platform Xbox And Ps4
Fixing A Ps4 Controller That Won’t Connect Or Charge
If you’re reading this, you’ve probably experienced an issue from which many PS4 owners have suffered: one moment your DualShock 4 controller is working fine, the next moment it appears completely dead. No lights will turn on, USB charging doesn’t work, resetting the controller doesn’t work. It seems that it has completely died, and no matter how many troubleshooting guides you follow, nothing fixes it. Fortunately, there’s a solution.
I’m aware of this issue because it has affected me…three times. The first time was less than three months after I bought the console the controller that came with it completely died, and after a day of troubleshooting failed to fix it, I bought a new controller . Then three months later, that second controller spontaneously died.
Finally, a couple months after that you guessed it the third controller worked, then I pushed the PS button to turn it on and it didn’t work. Nothing happened. It appeared entirely dead. I tried using the reset button, tried different variations of resetting, plugging in, and turning on the PlayStation. But nothing worked. I had three expensive, seemingly dead controllers.
Here’s the thing, though: while attempting to connect to a pair of Bluetooth headphones, I noticed that a “PlayStation Controller” was listed in the BT drop-down menu on my Mac. That meant that while the controller appeared dead, there was some charge left and it was still broadcasting for a connection.
Issue : Dualshock 4 Controller Wont Pair With The Ps4
If your controllers light turns on but it wont pair with your console, reset your controllers settings to potentially fix the issue.
To do that, first, unplug your controller from your console. On the back of your controller, near the L2 button, you will see a small hole. In this hole, insert a small tool and push the reset button within. Keep the button held down for five seconds.
Your controller is now reset, and you may start the pairing process.
Read Also: Why Wont Ps4 Connect To Wifi
Pair A Secondary Dualshock 4 Controller To Your Playstation 4
Your PS4 lets you connect up to four controllers at a time. To add a secondary controller to your console, you dont need the USB cable.
Using your paired controller, from PS4s main screen, select Settings.
Scroll down the Settings page and choose Devices.
Select Bluetooth Devices.
On your new controller, press and hold down the PS and Share buttons for about five seconds. Your controller will appear on your PS4s screen. Select it to pair it.
Your new controller is now paired with your PS4, and you can use it to play your games and perform other tasks on your console.
Don’t Let A Glitched Controller Mean Game Over
The Asurion Home+ protection plan offers peace of mind for all of your eligible home tech, including your favorite gaming systems, for less than $1 per day. From graphical glitches to faulty drives, we cover your video game console and original controller from the unexpected breakdownâno matter where or when you purchased it. Learn more at asurion.com/homeplus.
*The Asurion® trademarks and logos are the property of Asurion, LLC. All rights reserved. All other trademarks are the property of their respective owners. Asurion is not affiliated with, sponsored by, or endorsed by any of the respective owners of the other trademarks appearing herein.*
The devices we love arenât cheap. Protect them with Asurion Home+.
Weâll cover all your favorite home tech for less than $1 per day. No receipts or registration forms required.
Also Check: How Do I Reset My Ps4 Controller
Why Won’t My Ps4 Controller Connect To The Console How To Fix Ps4 Connectivity
This article was written by Darlene Antonelli, MA. Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field. She earned an MA in Writing from Rowan University in 2012 and wrote her thesis on online communities and the personalities curated in such communities. This article has been viewed 27,518 times.
There are many reasons why your PS4 controller won’t connect to your PlayStation 4 console including a bad battery or Bluetooth interference. This wikiHow article will show you some steps you can take to troubleshoot why your PS4 controller won’t connect to the console.
Connect Your Wireless Controllers To Ps4 Without Usb Cable
If you want to add a second or more wireless controllers to your PS4 console, but you dont have the USB cable, you still can connect them without the USB cable. Here is how to do it:
1) On your PS4 dashboard, go to Settings > Devices > Bluetooth Devices .
2) On your PS4 controller , hold down the button and the PS button for around 5 seconds.
3) Your PS4 controller should then show up in the Bluetooth Devices screen. Select it.
4) Your PS4 controller should then be connected to your console now. Enjoy your games.
Recommended Reading: Can You Use Ps4 Controller On Xbox
Hard Reset Your Ps4 Controller
If removing and re-pairing the controller didn’t work, you can next try the full reset procedure for the DualShock 4. You’ll need a small pointed object, like a bent paper clip or a SIM card ejection tool, to do this. This won’t reset anything on your PS4 or affect your controller aside from having to pair it again, so it’s a non-intrusive troubleshooting step.
Fully turn off your PS4, then flip your controller over. You’ll see a small hole next to the screw by the L2 button . Use your pointed tool to press and hold the button inside this hole for roughly five seconds.
Once you’ve done this, connect your controller to your PS4 again via USB cable and see if it pairs successfully.