Wednesday, June 12, 2024

How To Open Ps4 Controller

Don't Miss

Ps4 Controller Not Working How To Fix The Most Common Issues

How To Open A PS4 Controller The Best Way (DUALSHOCK 4)

If your PS4 controller isn’t responding or keeps disconnecting, here are troubleshooting steps to fix PS4 controller problems.

Most of the time, your DualShock 4 controller probably works fine. But when your PlayStation 4 controller isn’t responding or disconnects randomly, it’s frustrating.

Let’s look at fixes for when your PS4 controller is not working, so you can get back to playing.

Don’t Be A Dumbass When Disassembling Ps4 Controllers

So, I have 2 PS4 controllers. Both of them have one analog stick with the rubber ripped off, and one good one. The L2 button on one of them broke, so I figured this would be a good time to once again take apart the controllers and fix them up a bit . I was planning to fix the L2 on the one controller, and take the good analog stick from one controller and put it in the other, this having two good analog sticks on one controller. I went about doing this while sitting on my carpet. I did what I needed to do, correcting the L2 and swapping the analog sticks, and thus went to go test them on the PS4. Much to my surprise, neither of them work anymore. I’m not 100% sure, but I believe that I may have fucked up the controllers via some static shock or something. I hope I’m wrong, and I’d appreciate any possible solutions you all might have.

TL DR: Be careful when disassembling the controllers and don’t do it on carpet.

How To Start Ps4 Without Controller

So, the normal that one would turn on their PlayStation is by simply pressing the PS button, provided that the power to the console is intact. But what happens when the controller is broken or the battery is dead and you cannot replace it currently?

Fortunately, there are a couple of methods you can apply to start your PS4 even without the official controller. And these methods are readily accessible to pretty much any PS4 owner.

Also Check: Project64 Ps4 Controller

How To Take Apart A Ps4 Controller And Put It Back Together

Even though now you have managed to clean the PS 4 controller by opening it up. The task isnt finished yet, so follow these steps to make it normal or out it together.

  • First of all, put the mainboard in its place in the case.
  • Now connect the touchpad cable to the mainboard.
  • Then secure the board with screws.
  • Put the battery securing area on the mainboard.
  • Then place the battery in the securing area and connect it to the mainboard.
  • Connect the backlight cable to the mainboard.
  • The gamepad bottom case should get installed starting from the upper edge, where left and right triggers are usually placed.
  • Check if anything is interrupting the bottom edge of the gamepad case if nothings there, snap it.
  • When the gamepad case is closed, check if the gamepad works successfully by pushing the PS button and check the backlight indicator working or not.
  • Then tighten up the screws carefully.
  • Wiha 26105 Precision Phillips Screwdriver

    Phillips Heads Screwdriver Open Shell Repairing Tool for PS4 Pro Slim ...

    PS5 controllers have very small screws. Almost every DS4 contains four 6mm Phillips #00 screws. That means youll need to find a screwdriver that is compatible with such small-sized screws.

    While there are many different screwdrivers in the market that are able to work fine with Phillips #00 screws, myrecommendation is to use a screwdriver from Phillips. Phillips screwdrivers are designed to be one hundred percent compatible with Phillips screws, so it would a wise choice to use one of them.

    You should use the Wiha Phillips #00 x 50 screwdriver to open your PlayStation 4 controller. Not only this particular screwdriver works great with smaller size screws, but also it is specifically designed to work with DS4 controllers. The thicker textured part under the tip of the screwdriver has made it really comfortable to rotate. You should be able to disassemble your controller with no real difficulty with the Phillips #00 x 50 screwdriver.

    You can also use this screwdriver for other DIY projects as well.

    You May Like: Whats Safe Mode On Ps4

    How To Open Ps4 Pro

    Follow these steps to disassemble the PS4 Pro.

    Step 1: Keep the PS4 Pro in a flat and clean area so that you can easily find out all the screws after open the PS4 Pro.

    Step 2: Turn off the PS4 Pro.

    Step 3: Hold the bottom part of the PS4 to make it simple.

    Step 4: Lift the PS4 Pro up and towards you to open it properly.

    Step 5: Now, you need to literally break the seal.

    Step 6: After that, you can easily remove the fan.

    Step 7: Flip the plastic cover up again to clean each and every corner of the PS4 Pro.

    Finally, you are all done with your work of opening the PS4 Pro. Without depending on anybody else you can open your own PS4 game console or PS4 Fat, PS4 Slim and PS4 Pro by yourself at home now as you know all the steps for how to open PS4. With the help of your knowledge now you can help any of your friends regarding the same problem.

    Are you interested in knowing more about how to handle your PS4 console? This blog on How To Turn Off PS4 Controller: An Easy Guide For PlayStation Owners will be helpful for you.

    How To Fix A Ps4 Controller That Doesn’t Work On Pc

    There may be several reasons for a DualShock 4 to be unresponsive on a PC:

    • The battery is dead: try charging your controller.
    • USB cable is damaged: if you’re using a USB cable, try using another one.
    • The PS4: the problem may be due to the PS4 connectivity. Try rebooting your console.
    • The controller needs a reset: a hard reset may fix the problem.
    • Bluetooth pairing: try turning off, then on again your PC’s Bluetooth. Once this is done, pair it again with your controller. Also, make sure that your console is turned off so there is no signal interference.
    • Drivers: make sure all your PC’s drivers are up to date.
    • Clean your controller: however, we recommend checking if you can still claim the controller’s guarantee. If this is the case, we recommend doing so. If you choose to open or repair your controller at home, it will lose its warranty.

    You May Like: Change Resolution Ps4

    Fixing A Ps4 Controller That Won’t Connect Or Charge

    If you’re reading this, you’ve probably experienced an issue from which many PS4 owners have suffered: one moment your DualShock 4 controller is working fine, the next moment it appears completely dead. No lights will turn on, USB charging doesn’t work, resetting the controller doesn’t work. It seems that it has completely died, and no matter how many troubleshooting guides you follow, nothing fixes it. Fortunately, there’s a solution.

    I’m aware of this issue because it has affected me…three times. The first time was less than three months after I bought the console the controller that came with it completely died, and after a day of troubleshooting failed to fix it, I bought a new controller . Then three months later, that second controller spontaneously died.

    PlayStation 4 Review

    Finally, a couple months after that you guessed it the third controller worked, then I pushed the PS button to turn it on and it didn’t work. Nothing happened. It appeared entirely dead. I tried using the reset button, tried different variations of resetting, plugging in, and turning on the PlayStation. But nothing worked. I had three expensive, seemingly dead controllers.

    Here’s the thing, though: while attempting to connect to a pair of Bluetooth headphones, I noticed that a “PlayStation Controller” was listed in the BT drop-down menu on my Mac. That meant that while the controller appeared dead, there was some charge left and it was still broadcasting for a connection.

    How To Pair A Dualshock 4 With An Iphone Or Ipad

    How To Open A PS4 Controller
  • Open the Settings app.

  • Press Bluetooth. Bluetooth is probably already on, but if it isnt, flip the Bluetooth toggle at the top of the next page to green.

  • While the Bluetooth menu is still open, grab your DualShock 4 controller and make sure its charged.

  • Press the PlayStation button and the Share button and the same time and hold them down for a few seconds. The light on the back of your DualShock 4 should start flashing intermittently.

  • On your iPhone or iPad, you should see DUALSHOCK 4 Wireless Controller pop up under Other Devices in the Bluetooth menu. Press it.

  • The light on the back of your DualShock 4 should immediately switch to a reddish-pink color. Your DualShock 4 is now paired.

  • Hold both of these buttons down at the same time for about two seconds.

    Recommended Reading: How To Link Your Ea Account To Ps4

    How To Press Ps Button Without Ps4 Controller

    Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.

    If youre playing a PS4 without a controller, or with a broken one, dont fret! We have a simple workaround for you to continue the gaming experience.

    To press the PS button without the help of a controller, you can use a smartphone or tablet as a remote controller with the official PlayStation app. Alternatively, you can connect a keyboard to the PlayStation and use the pause/break button as the PS button.

    How Do You Press The Ps Button On A Keyboard

    The keyboard can act as a proxy to the PS4 controller, letting you navigate and even play some games with it. You can also use it to input the PS button command.

    The pause/break button on the keyboard acts as an alternative to the PS button on the controller. So, if you wanted to use the PS button with a keyboard attached, you simply need to press the pause/break bar.

    Recommended Reading: How Much Will Gamestop Give Me For My Ps4

    What To Do If Your Ps4 Controller Trackpad Is Not Working

  • Turn off your controller and back on again.
  • Make a 50/50 measured solution of isopropyl rubbing alcohol and water.
  • Use a microfiber cloth to slightly dampen with the solution.

  • Use the microfiber cloth to clean your trackpad.
  • Wait for the controller to be COMPLETELY dry before attempting to turn it back on. Do not use the can of compressed air to speed this process up. You’re just going to end up pushing the water back into the controller.

    Beyond that, a broken trackpad is cause for repair or replacement. However, it won’t do you any good to try and replace it because the part is not readily available. Also, you would potentially compromise your controller’s USB port since the trackpad is connected by the same ribbon that powers it.

    Repair Of Buttons Dualshock 4

    PS4 step by step disassembly

    Clean main board with cotton swabs.

    If some button dont react push each time you can try to recover its functionality with graphite pencil. This method in most cases helps, but not always.

    Now start to assemble gamepad

  • Place main board to its place in the case.
  • Connect touchpad cable to main board.
  • Secure the board with screw.
  • Now place battery securing area on main board.
  • Place battery to securing area and connect it to main board.
  • Connect backlight cable to main board. Take attention the way that cable must be connected, if it be connected upside down backlight wont work.
  • Gamepad bottom case must be installed starting from upper edge, where left and right triggers placed.
  • Now check if something would interrupt snaping of bottom edge of gamepad case, if theres not snap it.
  • Now when gamepad case fully closed check if gamepad works by pushing PS button and watching backlight indicator.
  • If its all right secure case by tighten screws.
  • Read Also: How To Dunk On 2k20

    What To Do When Your Ps4 Controller Doesn’t Connect

  • First, try plugging your DualShock 4 into the PS4 using your USB cable.

  • Press and hold the PlayStation button on the center of your controller. This will prompt the controller to resync.
  • If your DualShock still isn’t connecting to your PS4, try these steps instead.

  • Turn off your PlayStation 4.
  • Connect your DualShock 4 controller to a USB cable that is connected to your PS4.
  • Press and hold the PlayStation button on the center of your controller. This will prompt the controller to resync at startup.
  • If neither of those options works, you’ll need to reset your controller entirely.

  • Look on the rear of the controller for a tiny hole located next to the L2 button.

  • Get a pin, paperclip, or some other type of thin poking device to jam in there.
  • Push the button on the inside for a couple of seconds and then release.
  • Connect your DualShock 4 controller to a USB cable that is connected to your PlayStation 4.

  • Press and hold the PlayStation button on the center of your controller. This will prompt another attempt to resync.
  • Sometimes, during the PS4 controller troubleshooting process, it just fails to sync with the console. It’s worth noting that the PS4 uses a standard Bluetooth connection, so if you use your controller with multiple devices such as your PC, smartphone, or tablet you’ll want to make sure it’s not connected to anything else while you’re trying to connect it to your PS4.

    Ps4 Controller Won’t Pair Or Connect

    If your DualShock 4 is on but not responding, you can try to re-pair your controller with your console . To do this, you’ll need a second, working DualShock 4 controller to work through these steps.

  • On your PlayStation dashboard, go to Settings > Devices > Bluetooth Devices.
  • Select your inactive DualShock 4 controller from the list. It will be the one without the green dot next to it.
  • Press the Options button on your working controller, then select Forget Device. This will remove the inactive, malfunctioning controller from your PlayStation’s system.
  • Press the PS button on your working controller, then select Power > Turn off PS4.
  • Once your console is completely turned off, connect the malfunctioning controller to your PS4 with a USB cable, then turn the console back on.
  • Press the PS button on your malfunctioning controller, and log on to your PS4.
  • Recommended Reading: Gta 5 Usb Mod Menus

    How To Fix A Flashing White Light On Ps4 Controller

    If you are experiencing this problem, this may be due to a low battery level or an unsuccessful connection to the console. Here’s what to do to fix this issue:

    • Restart your PlaysStation 4.
    • Charge your DualShock 4.
    • Test the USB cable – plug your controller into the console with another cable.
    • Reset your DualShock 4: there is a tiny hole on the back of the controller . Press and hold with a sim card opener for 5 seconds. You can then reconnect your controller.
    • Test your PS4: launch the console in Safe mode, connect your controller with a USB cable, and press the PS button.

    How To Take Apart A Ps4 Controller Without Breaking It

    How to open your PS4 controller easily with no damage

    Follow these simple steps carefully to successfully disassemble it.

    • Open up the gamepad case near the earphones port.
    • Then open up the case near the left and right triggers.
    • After that, remove the bottom case of the PS4 controller. Also, dont forget while removing the bottom case, you will have to remove the backlight cable embedded in it.
    • Now disconnect the PS4 4 controller battery and to do that, just pull up the battery cable and remove it.
    • Then remove the battery securing the area.
    • Now Unscrew the screw which is used to fix the mainboard.
    • Then disconnect the cable from the mainboard of the Dualshock 4 controller and remove the mainboard.
    • Now you can clean the mainboard if you want.

    SO this is how you can take apart the PS4 controller and even paint it if you want. Many people have asked us about how to take apart a PS4 controller and clean it. So follow the steps mentioned above, and you will be successfully able to do it without any cause.

    Just make sure that you use a clean cotton swab to clean it. It will protect the PS4 controller and will prevent any damage.

    Also Check: Ps4 Gta5 Mod Menu

    How To Connect A Bluetooth Keyboard Or Mouse To Ps4

    Setting up a Bluetooth Keyboard is slightly different than USB. Here is what you have to do:

  • From the PS4s Home Screen, press up on the D-pad to select the navigation menu.
  • Go to Settings.
  • Wait for the system to scan for nearby Bluetooth devices.
  • Pair the devices normally by following the default pairing process of your Bluetooth device.
  • The PS4 will recognize a new device.
  • Choose the profile that you want to link with the device.
  • After following these steps, you should be able to use your Bluetooth keyboard to control your system.

    Use A Keyboard To Control The Ps4

    Another way for you to control your PS4 is by using a keyboard and mouse setup. Using a keyboard and mouse can have its perks, particularly for PC users who are used to that setup. This can be very useful in certain games that allow you to use the keyboard and mouse.

    Other than playing games, using the keyboard to navigate the PlayStation can also be very useful. You can use it to access different applications, surf the internet or load up your desired content without needing a functional controller.

    For a wired keyboard, you simply need to connect it with a USB cable. The process is just like how you would connect a keyboard to a computer.

    If you want to connect a wireless I.e., a Bluetooth keyboard, here are the steps you need to follow:

    • First, go to the settings menu from the PS4 home screen.
    • Select device.
    • Go to Bluetooth Device. The console will start scanning for any Bluetooth device nearby.
    • Turn on the pairing mode for your keyboard.
    • If it successfully recognizes your keyboard, its name will pop up. Select it and the pairing process will start. This may take a few seconds, after which you will be able to use the keyboard freely to control the console.

    Read Also: Sims 4 Nude Cheat

    More articles

    Popular Articles