Friday, May 24, 2024

What Kind Of Screwdriver To Open Ps4

Don't Miss

How To Take Apart A Dualshock 4 Controller

How To Open/Disassemble a PS4

Generally speaking, the Dualshock 4 is fairly sturdy and there arent too many reasons that it would need to be repaired. In the event that you want to make some cosmetic changes or fix something that is broken inside, this video will show you how to take apart a Dualshock 4 controller.

Step 1: Remove the back plate

There are 4 screws in the back of the controller. Remove all of these to loosen the back plate. Squeeze both handle parts on the controller and they will pop apart. Below the home button you will need to apply a bit of force as there are 2 clips holding the controller together. Once the bottom is loose you can gently pull the back plate off. There will be lots of cracking sounds, but these are just the plastic clips coming apart. Just do it gently as there are some ribbon cables inside that you need to take care of. Once the plastic part has come away from the back, remove the ribbon cable from the main controller that is connecting the light bar to the main board. The back plate will now be removed from the dualshock 4.

Step 2:

  • TAGS

Shut Down Your Ps4 And Unplug Everything

Before you start cleaning your PS4, make sure the console is turned off. It should have no lights on the top if you see an orange light, then it’s in Rest Mode and you’ll need to shut it down fully.

To fully shut down, turn your PS4 on, then press and hold the PlayStation button on your controller to open the Quick Menu. Head to Power > Turn Off PS4. Wait until all lights on your PS4 turn off, then unplug the power cable, HDMI cord, and anything else connected to it .

Bring your PS4 to a place where you have some room to work. Since you’ll be removing small screws, you should have a safe place to set them.

Like when building a PC, you should take care not to build up static electricity. Don’t work on a static-prone surface, such as a shaggy carpet, and try to only touch the plastic components when cleaning.

Why Is The Ps4 So Noisy

If your PS4 is too hot, the fan spins and very likely gets much louder than normal. If therere something on or around your PS4 console, move them away. Then wait for a while to see if your console cools down and gets quiet. Never ever put your PS4 console into a cabinet, since there would be no space for airflow.

How can I get dust out of my PS4 without opening it?

Why does my PS4 overheat so fast? Your PS4 may overheat if the vents are blocked, or if there isnt enough clearance between the vents and other objects. The PS4 will also tend to overheat if theres a lot of dust inside. The temperature in your room can also have an effect, as can faulty hardware or firmware.

How do I open the bottom of my PS4? 1) Grab underneath of the top cover near the power button. 2) Pull upyou will hear it click or snap as you pull up. 3) Move your hand over to the opposite side of the top cover and pull up here as well. 4) After puling up both sides of the top cover it should now slide back and off of the PS4.

Recommended Reading: How To Play Split Screen On Ark Ps4

What Screwdriver Do You Need For Ps4

To disassemble the PS4 you will need two types of screwdrivers: Torx T8 / T9. Phillips PH0 / PH1 Also. Tweezer will be useful.

What can I use instead of a T9 screwdriver? What to Use if You Dont Have a Screwdriver

  • Flathead screwdriver.
  • Pliers.
  • Thumbnail.

What screwdriver Do you need to open a PS4? T8 Torx Screwdriver,TECKMAN TR8 Torx Security Screwdriver for Macbook,HDD,PS3,PS4,Xbox one and Xbox 360 Controllers Repair.

How do you measure Torx screw size? How to Measure a Torx Bit

  • Line up the ruler on the star-shaped screw tip to measure from one point to the point directly opposite.
  • Examine the markings on the ruler and write them down.
  • T8 T10 Screwdriver Repair For Ps4 Ps3 Xbox 360 2pcs

    For Sony PS4 XBOX Torx Security Bit Screwdriver Upgrade Open Fix T6 T8H ...
    • Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
  • Go to your orders and start the return
  • Select the return method
    • Make sure this fitsby entering your model number.
    • 100% Brand New and High Quality
    • Compatible with: PlayStation 4,PlayStation 3,PlayStation 3 Slim,Microsoft Xbox 360
    • Extremely durable and useful
    • This item: T8 T10 Screwdriver Repair for PS4 PS3 XBOX 360 2pcs$3.99Sold by Highfine and ships from Amazon Fulfillment.Get it as soon as Friday, Aug 12
    • Ships from and sold by it as soon as Tuesday, Aug 16
    • Sold by Teckman and ships from Amazon Fulfillment.Get it as soon as Friday, Aug 12

    You May Like: How Many Gb Is Fortnite Ps4

    Can Sony Fix My Ps4

    If your device is still under warranty then the best option would be to send it in to Sony for warranty repairs. There are several exceptions to this however. If you have already removed the warranty stickers then Sony will charge for any repairs and in some cases probably will not accept the console at all.

    How To Clean The Ps4 Slim And Ps4 Pro

    To clean the fan on the PS4 Slim, you don’t need to remove the warranty sticker. It’s much easier to remove the cover, too. All you have to do is pull up on the left and right corners on the front of your system. Pull on the middle, then slide the cover back and it will come right off.

    From here, you’ll be able to see the fan even though it’s obstructed by a cover. If your fan doesn’t look too dirty , you can spray some canned air into it and probably call it a day. Remember to use a cotton swab to prevent the fan from spinning.

    For full cleaning, you’ll need to remove several screws from the cover and the power supply plate. Since we focused on the original PS4 here, please see the video below for PS4 Slim-specific instructions.

    The PS4 Pro is similar, but it’s even simpler. Simply pull up on the front left and right corners to loosen the cover, then slide it back. You can see the fan as soon as you remove this, making basic cleaning quite easy.

    Unfortunately, the heat sink is buried deep in the PS4 Pro, and accessing it requires disassembling almost the entire console. Thus, you should stick to just cleaning the fan if you have a PS4 Pro. Check the below video for more details.

    Also Check: Why Is My Ps4 Controller Light Red

    What Do I Need To Do To Clean My Ps4

    This post will show you four frequently encountered problems and responding fixes. You can open the PS4 console with screw drivers prepared in advance. To do that, you should get the back side faced you and then flip it upside-down. Here, you will see 3 stickers on this side that should be removed off.

    Remove The Ps4’s Cover

    Remove Torx Security Screws WITHOUT special tools! Can help open/disassemble Playstation, Xbox, more

    Now that you’ve removed the screws holding the cover in place, you can pop it off. Start at the back and lightly pull up on the edges. Don’t use a ton of force as you work your way around the PS4, the cover should come free. Tug it up and remove it.

    At this point, you can look at the cover you just removed and clean any dust inside. Your compressed air will make short work of it this is also a good place to use a cotton ball to dab any remaining debris out. After cleaning the cover, set it aside for now.

    Back on the system, you can now see the PS4’s fan, which acts as a good indicator of how dusty your system is overall. However, there’s one more component to remove first.

    Also Check: What Is R3 On Ps4

    How Do You Open And Clean An Original Ps4

    With that out of the way, lets look at how to clean your PS4.Step 0: What Youll Need for Cleaning a PS4. Step 1: Shut Down and Unplug Everything. Step 2: Remove the Back Stickers and Screws. Step 3: Take Off the PS4 Cover. Step 4: Remove the Power Supply. Step 5: Blow the Dust Out of Your PS4. Step 6: Reassemble the PS4.More items06-Feb-2020

    Perform A Ps4 Database Rebuild

    Now you can put your PS4 back in its usual spot and plug all the cables back in.

    One last step isn’t strictly necessary, but since you’ve just cleaned out your PS4’s hardware, it’s a good time to optimize its software performance too.

    The PS4 includes a utility called Rebuild Database that optimizes all the data on your drive, similar to defragmenting your computer. If you’ve had your PS4 long enough to build up significant dust, chances are it could benefit from this operation too.

    To access it, shut down your PS4 . Once it’s off, press and hold the Power button on the front of the console . You’ll hear one beep right away continue holding it until you hear a second beep. This boots the PS4 into Safe Mode.

    Connect your controller to the PS4 with a micro-USB cable, then press the PlayStation button to sync it. Select the Rebuild Database option and confirm the operation. Your PS4 will then perform the process.

    The system says this could take some time depending on how much data you have. However, in our case, it didn’t take more than 15 minutes or so with nearly 2TB of data on the hard drive. Once it completes, you’ll be back at your home screen.

    Once you’ve done this, you should hopefully notice your PS4 runs a bit smoother in the menus. It’s not a bad idea to perform this operation regularly to keep your PS4 performance optimal.

    You May Like: When Does The Next Gen Playstation Come Out

    Blow The Dust Out Of Your Ps4

    Finally, you have access to the PS4’s heat sink and fan. Now we can explain how to clean your PS4’s fan and remove dust that’s deep in the system.

    Take your can of compressed air and, if it has one, insert the straw for more focused cleaning. Spray a few blasts of air away from your PS4 first, in case there’s any liquid in the tip.

    Now, use your canned air to blow short bursts of air all around your PS4, getting rid of the dust. Make sure to check the corners for hidden dust , and take care to blow it out of the system instead of further in. You can also use your cotton swabs or cotton balls to help you remove any dust the air won’t reach.

    Focus especially on the fan, heat sink, and outside edges of your PS4 when looking for built-up dust, as these are common locations for it. If you’re not familiar, the heat sink is the metal set of “bars” that the straw is pointing at in the above picture.

    Note a few important warnings when using canned air:

    Klein Tools 32585 Multi

    For Sony PS4 XBOX Torx Security Bit Screwdriver Upgrade Open Fix T6 T8H ...

    Klein Tools is a well-known manufacturer of electronic accessories. These include nifty tools like circuit breaker tracers, voltage testers, and GFCI outlet testers. As a result, we were excited to heck out the Klein Tools 32585 Multi-bit Precision Screwdriver Set. Its the most basic set on our list, but its also the most well constructed. With a chrome-plated barrel, its resistant to corrosion and other damage. This makes it a great choice for long-term storage and use. So you can throw it in your tool chest when youre done with it and forget about it. When you come back to it a few years later, it will still be in excellent condition.

    The barrel stores all four bits. The bits are double-sided, with a T7/T8 and T10/T15 respectively. They fit in each end of the barrel, which is also reversible. As a result, you get a single, pocket-sized unit thats highly versatile. The tips are heat-treated steel, which ensures that they wont strip under normal circumstances. The handle itself is also well-constructed. It has a cushioned, rubberized grip that prevents slippage. It also sports a rotating top cap, which makes it easy to manage in tight spaces. This is ideal for working on any electronics, including game consoles.

    You May Like: How To Connect Ea Account To Ps4

    Teckman 10 In 1 Torx Screwdriver Set

    The Teckman 10 in 1 Torx Screwdriver Set is a bit more understated than the Wirehard set. Primarily, it consists of a set of T3, T4, T5, T6, T8, and T10 Torx drivers. These arent simple tips. Theyre full-on drivers, with handles and everything. The grips are sticky and rubbery, which makes them easy to hold on to, even when youre sweating. And if you think sweat isnt an issue, just wait until youre disassembling your game console. It can get stressful in a hurry. And having a quality grip to hold onto means theres one less bit of stress youll need to worry about.

    The driver bits are well-constructed, manufactured from hardened S2 steel. This means theyre not likely to strip, even after dozens of uses. Theyre also magnetized, which reduces your risk of losing any screws. When a screw comes loose, it will cling to the end of your driver like a baby Oppossum to its mother. So when you remove 14 screws, youre guaranteed to have 14 screws to put back in. Moreover, the kit includes a sturdy plastic carrying bag, so you can keep all your drivers together.

    Remove The Back Stickers And Screws

    Now that you’ve got your PS4 ready to work, turn it around so the back is facing you, then flip it upside-down. You’ll see three stickers along the “top” that you must remove.

    Note that if you have the slightly revised model of the original PS4, you’ll only see one sticker and screw here in the middle.

    The middle one has a special warranty sticker that damages itself when you remove it. The other two are a bit thicker and might require a bit of extra work to peel off. Use your knife or another pointed tool to peel back a corner of the stickers, then they should come off easily. Be careful not to scratch your system while you remove them.

    Set them aside if you want to re-apply the stickers later, or throw them out if you don’t care. Once you’ve removed the stickers, use your TR9 screwdriver to remove the screws underneath. They’re short, so they shouldn’t require much effort. Take care not to strip them, and set them aside in a safe place.

    Also Check: How To Get Aimbot On Ps4 Fortnite

    What Screwdriver To Open Ps4 Controller

    No controller, no gaming. The controller is a core part of a PS4. Many of us get comfortable with one controller and we love to use it whenever we are playing a game. But if this controller is not working properly, we all try to fix it first before going for another. So, for fixing it we need to open the PS4 controller. But the question is what screwdriver must be used to open the PS4 controller.

    You cannot use the same screwdriver for opening the controller that you have used for opening the PS4. The screws on the controller are very tiny and specially made. Thus, you need Philips head screwdriver #0. The screwdriver is easily available and you must make it a part of your PS4 Toolkit.

    You can easily find this screwdriver but you need to make sure that it offers certain features such as the grip of the screwdriver should be cushioned so that you dont put more effort and pressure on the controller, it should give you precise control and optimum rotation, and the tip should be magnetic and heat treated.

    What Screwdriver To Open Ps4 Hard Drive

    • Unique three-sided handle combines maximum power with smooth…
    • Premium alloy steel blade has a precisely sized tip for an exact…
    • Size marking on butt end is easy to identify in tool belt or…
    • Handle profile resists rolling on inclines up to 20 degrees
    • Made in USA

    Most of PS4 lovers always tend to upgrade or replace their hard drives. This task is done from time to time thus it is very important to know which screwdriver to be used for unscrewing the screws for getting to the hard drive. For the screws for reaching out to the hard drive the screwdriver, Phillips Head #0 is required.

    You wont find many screws for unfastening to reach the hard drive thus this task is very easy. Philip head screwdriver #0 is very easy to find and it is a must addition to the PS4 toolkit because the same screwdriver is used for opening the PS4 controller. You need to make this screwdriver an essential part of your toolkit if you are a PS4 lover and you often tend to upgrade or replace your hard drive.

    Don’t Miss: How To Edit Videos On Ps4

    What Does Torx Screw Look Like

    Torx is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits.

    What can I use instead of a Torx screwdriver?

    How to Unscrew a Torx Screw Without a Screwdriver

    • Use a plastic toothbrush. Similar to its use on both Phillips and flat head screws, a plastic toothbrush can also be used to remove a Torx screw.
    • Use a small flat head screwdriver.
    • Break out the pin for security Torx screws.

    What screws does a PS4 Slim use? Unscrew and remove the two 5.0mm screws on the side of the console using a Phillips #1 screwdriver with a counter-clockwise motion.

    Can you open PS4 with T10? You are looking at a T8 T10 screwdriver. They can be used to open Xbox One as wireless controllers for Mod kit or LED installation. It is very difficult to open your controller without one of these tools. This is the proper screwdriver for opening a Xbox 360/ PS3 / PS4, but not Xbox ONE CONSOLE.

    More articles

    Popular Articles

    What Is Dns On Ps4

    How To Pull Ips On Ps4 2020