Configuring The Camera View
After connecting your PSVR headset, you’ll need to configure your PlayStation camera and makesure everything is working properly.
First, resond to the setup prompt.
Now, read the health and warning info.
Position yourself and the camera so that your head is centered in the square onscreen.
This represents a good position.
Now follow the prompts to position the headset. Adjust the position until the headset is properly centered over your head.
Can You Connect Oculus Quest 2 To Ps4 Or Ps5
Officially, the Quest 2 is not compatible with either the PS4 or the PS5. With Sony confirming the release of their ownPSVR 2 headset in 2022, this shouldnt really come as a surprise. Sony would clearly much prefer that people use their VR headset, rather than that of a 3rd party. There are also compatibility questions around the games and the controllers. The Quest is designed primarily for PC use, so plugging it into your console wont make any difference either.
So, is there any way you can play PlayStation games on your Quest headset? Maybe
Read More: Is Minecraft on Oculus Quest 2? How to play Minecraft on Oculus Quest 2
Is Psvr Better Than Oculus Quest
When it comes to specs, the original Oculus Quest pulls ahead of the PSVR, with a resolution of 1600 by 1440 per eye. The newer Oculus Quest 2 also trumps Sonys VR offering in terms of specs, but the companys upcoming PlayStation VR 2 could be enough to make Meta sweat.
Boasting 2000 by 2040 per eye resolution, the PSVR 2 could set the VR experience bar even higher, especially if it gets native gaming PC support. That said, Metas Project Cambria, A.K.A. the Oculus Quest Pro for the time being, is also on the horizon, and the companys Metaverse ambitions could give it an advantage within the virtual reality scene.
Recommended Reading: How To Mod Gta 5 Xbox One 2020
Can You Connect Two Playstation Vr Headsets To A Ps4
A lot of you have been asking me some great questions on and regarding PlayStation VR. The biggest of them is for multi-player gaming and whether you can connect two PlayStation VR headsets to a PS4. In short, the answer is no and thats because of the raw power it takes to run VR games.
Sony has gone on record, indicating that they will reject games that run under 60fps for VR and, as it stands, developers at times have a hard time reaching that frame rate on normal, non-VR games. Add the extra complexity that is VR and trying to get PS4 to power two different headsets is simply out of the question. For that very same reason, even high-end rigs designed for Oculus Rift can only power one headset at a time. However, that doesnt mean multi-player is out of the question. More after the jump.
As the picture above indicates, there will be party games for PlayStation VR but they will be limited to one person immersed via the headset while others around them will utilize either Move or DualShock 4 controllers. In fact Im not sure well ever see a vision where multiple VR headsets can be connected to a single console or computer until these units simply become independent and run on their own. At that point, each headset will act as its own console and have access to whatever content is appropriate for it and those who will want to game with you will simply purchase the same game and connect with you that way.
How Does The Oculus Quest 2 Compare To The Playstation Vr
While the Oculus Quest 2’s graphics are sometimes criticized for looking primitive, this has nothing to do with the screen’s capabilities. Oculus Quest 2 has a resolution of 1832 x 1920 pixels per eye, while Playstation VR has only 960 x 1080 pixels per eye. Playstation uses the top OLED screen type while Oculus has LCD screens.
Read Also: Can You Share Playstation Plus On Ps4
The Processor Box Needs Power
Once you have the HDMI in, HDMI out, and the USB cable plugged into the Processor Box, locate the power cord and power brick. The 12V power supply plugs into a round port on the back of the Processor Box. Without the power cord, the Processor Box is nothing but a fancy paper weight.
MORE: Best Virtual Reality HMDs
Plug In Playstation Camera
Before you turn on your PS4, you must ensure that your camera is plugged in. If you already have a PlayStation camera, skip this step. If you purchased a camera with your PSVR headset, nows the time to plug it in.
On the rear of the PlayStation 4 console, youll find a proprietary port that looks like a USB port with a weight problem. The plug on the end of the PlayStation Camera’s cord fits into this port. No other component will fit in the camera port.
MORE: Best Virtual Reality HMDs
Read Also: Save State Hotkey Dolphin
Why Isn’t The Playstation Vr Seeing My Ps4 Controller
Why can’t PlayStation VR see my PS4 controller? If your PlayStation VR doesn’t recognize your DualShock controller, check your controller’s USB cable. The USB cable may be blocking the light bar on the PlayStation VR controller. Disconnect the USB cable from the controller and make sure that the light strip is not blocked.
How To Properly Set Up Playstation Vr
Oliver Haslam is a professional freelance writer with nearly ten years of experience. His work has been published on Macworld, PCMag, 1Password’s blog, and other websites. He writes about all things Apple. Read more…
The PlayStation VR headset plugs into PS4 and creates a bona fide virtual reality experience. But like all VR headsets, it needs lots of cables. Well show you how to plug everything in and set up your room to get the most out of your PSVR.
The PlayStation VR lets gamers take on new challenges in new worlds, but the first challenge is getting the thing set up. Its more cumbersome than challenging, but dont worry! Were here to lend a hand.
You May Like: Project 64 2.3 Controller Setup
Before Starting Make Sure Your Controller Is Compatible With Psvr
The controller included with your PS5 is not compatible with PSVR. Most PSVR games use the PS4s standard DualShock 4 controller because of its VR tracking capabilities.
Many games are also compatible with the PSVR Aim controller or the use of two PSVR Move motion controllers. A few games necessarily require two PSVR Move trackers, so theyre not compatible with the DualShock 4 or the PSVR Aim.
Move Hdmi From Ps4 To Processor Unit
Once you have an appropriate play space available, and youve verified that you have all the necessary cables and components, you can proceed with the hardware setup.
First, locate and remove the HDMI cable from the back of the PlayStation 4 console. Next, plug the HDMI cable into the HDMI port labelled HDMI TV on the Processor Unit.
MORE: Best Virtual Reality HMDs
Don’t Miss: How To Configure Ps4 Controller On Dolphin
Tips To A Better Psvr Experience
Once you have your system up and running, it is time to make adjustments. Although PSVR works fine out of the box, it wont work in dark environments like 12 ft. by 12 ft. caves.
There are several ways to make things run smoothly when you put on your headset next time.
Clear out your play area. This is especially important if you dont have a lot of space. You should move any lamps, vases or other breakables that are within striking distance of your feet. The headset reduces your visibility so that you can see whats around you.
It is important to have a good headset fit. The adjustment mechanism allows you to make sure the headset fits comfortably without pressing too hard. If the image is unclear, you can reposition it.
If things are still unclear, manually adjust the interpupillary distance . Follow the steps in Settings > Devices > PlayStationVR > Measure Eye to-Eye Distance.
You must ensure that the tracking lights have been set up properly. Follow the prompts on-screen to adjust tracking lights.
Make sure to clean the PSVR lenses. No matter how much you try to keep them clean, they will get dirty. Use a microfiber cloth to clean them. Use a microfiber cloth to clean them.
All devices can be charged at once. DualShock 4 controllers hold a charge quite well, while PlayStation Move controllers dont. To avoid disappointment, make sure that they are fully charged before you use them. Its not fun.
Connect The Processor Unit
Read Also: How To Play Bed Wars On Ps4
Playstation 4 Wiki Guide
Surprisingly, you can use PlayStation VR as an monitor for your Xbox One or Wii U. All you need to do is plug in the HDMI cable from the Xbox One into the processor box in the slot labeled HDMI PS4. This is the slot that passes through the PS4s signal to the TV. By plugging in your Xbox Ones HDMI cable, it passes the Xbox Ones signal through the VR unit.
The virtual screen size depends on the setting you chose in the PS4 settings. If you want to adjust the size, youll need to plug the PS4 HDMI back in and power on the PS4. Hop into the settings and you can adjust the screen size. Simply plug the Xbox Ones HDMI back into the processor unit to use the new screen size.
It is important to note that the edges of the virtual screen are not going to be as clear as the center of it. This is because of PSVRs field of view and the fact that head tracking is not available since the PS Camera is not hooked up. 3D audio is also not available. The only way to get sound is through your TV.
Now this does not play games in virtual reality, nor does it support head tracking since the PS Camera is not hooked up. It displays the Xbox One just like a monitor. The quality doesn’t look as good as your HDTV, but it is a neat feature if you want to hide away to play any Xbox game.
How To Install Trinus Psvr To Your Computer
Before you can start playing, you must get going with Trinus PSVR.
Click . It will take you to a third party website. Make sure you run a virus and malware scan after the download just to be safe.
Click Run when the file has finished downloading. You may have to agree to Run as Administrator.
Click I accept the agreement.
Click Next. We’ll walk you through the physical setup later.
Click Install. When the installation is complete, a driver install window will open.
Click Next.
Click Finish.
Now that you have Trinus PSVR installed to your computer you can move on to the PSVR set up.
Also Check: What Day Did The Ps4 Come Out
Is It Possible To Link Oculus Quest 2 To A Ps4 Or A Ps5
Please accept our sincere apologies if you had hoped that Oculus Quest 2would immediately connect to PlayStation 5. Expect the unusual. An approved technique to link the two devices does not exist, and there is little reason to anticipate anything otherwise. Sony, after all, possesses its unique PSVR system, and the company is now developing a PSVR 2 platform.
In light of this, Sonys decision to promote the usage of a computing device on their platform makes no rationale. If they had their way, users would only be allowed to utilize PlayStation VR. Not only that, but its built for a PC, not consoles, so plugging it in wont do much of anything at all! In spite of all this, there might still be a method for you to enjoy PS4 and PS5 videogames with your Quest 2 headgear.
How Do You Up Playstation Vr
Connect the VR headset connection cable supplied with the processor unit and the VR headset using the symbols for the correct cable orientation. Connect your PlayStation Camera to the AUX port on your PS4 and place it on or directly above your TV. Turn on your TV, then your PlayStation 4 and finally your PSVR with the built-in remote.
Don’t Miss: Dualshock 4 Dolphin
How To Play Playstation Vr On The Ps5
After everything is set up, you can turn your Playstation back on to make sure your video and sound works. If you are having trouble, double check to make sure you followed the instructions above closely.
When you want to play a Playstation game in VR mode, you will put on your headset to activate virtual reality mode.
Be aware that some games require the use of your PSVR Motion controllers and others will only use a DualShock controller.
And with that, you should have setup PSVR to a PS5 or PS4. If you are having trouble, make sure to comment below and give us details on what is going on.
How To Connect Playstation Vr: Cuh
Don’t Miss: Does Scuf Impact Work On Ps5
How To Set Up Playstation Vr: Get Started With Psvr On Ps4
Tom Bedford Tom is fresh-faced to the world of tech journalism but has a keen eye and passion for technology, film, travel, games, and more. He currently writes freelance for Alphr, and spends his time exploring old technology . Read more November 29, 2020
If youve bought a PlayStation VR , you dont want to waste your time working out how to connect it to your PlayStation 4 you just want to play some of the best VR games available. Thankfully, Sony has made it easy to connect a PSVR set to both the PlayStation 4 and PlayStation 4 Pro with minimal hassle.
To confuse matters somewhat, there are actually two types of PlayStation VR headsets, including CUH-ZVR1 and CUH-ZVR2. Initial set-up stages for the two are identical, but they vary towards the end of the process. The CUH-ZVR1 has a sliding cover on the processor unit and the power button is on the headset connection cable. The CUH-ZVR2 doesnt have a sliding cover on the processor unit and its power button is on the headset directly. ZVR2 is also capable of HDR passthrough, making it a better model to use with the PS4 Pro and your shiny 4K TV. Make sure you know which model you have.
Youll also need a PS Camera to get PlayStation VR to work. These dont come as standard with the PSVR set, but you can buy a Starter Kit bundle that includes one.
How Can I Connect My Playstation To My Pc
Step 1 : Turn on the controller. When using the PS controller for the first time, make sure the PS3 controller is turned on. There is a PS button on the controller that must be pressed.Step 2 : Connect the PS3 controller to the PC. Take a USB cable and connect the PS3 to the PC. Make sure the USB driver is installed correctly.
You May Like: How To Take Parental Control Off Ps2
How To Set Up The Psvr
First, unplug the HDMI cable from the back of the PS4 and connect it to the port labeled HDMI TV on the back of the PSVR Processor Unit . This sends the signal to your TV.
Now, connect the PlayStation Camera to the AUX port on the PS4. Its labeled, and its the only port the PlayStation Camera cable fits.
Connect a new HDMI cable to the port labeled HDMI PS4 on the back of the Processor Unitours is pink, but yours will be black.
Connect the other end of the cable to the HDMI port on the back of the PS4. This sends the video from your PS4 to the PSVR.
Connect the USB cable to the back of the Processor Unit, and then to the PS4. This allows the two to communicate with each other.
Connect the AC power cord to the AC adapter, plug the cable into the back of the Processor Unit, and plug it into an outlet.
Next, connect the PSVR headset cable to the front of the Processor Unit, matching the symbols on the cables to the correct ports.
Now, put the PlayStation Camera on top of your TV using the provided bracket. Make sure its placed in the center and angled slightly downwardmore so if youre in a particularly small room.
You can now connect the included stereo headphones to the PSVR headset and turn everything on. Remember to press the power button on the PSVR headset, as it wont automatically turn on with your PlayStation.