Sunday, August 14, 2022

Why Is My Ps4 Controller Red

Don't Miss

Replace The Cable For Your Dualshock 4

TUTORIAL-How To Fix & Diagnose The Red Light Issues On Any PS4 Controller EASY GUIDE!
  • Purchase a Dualshock 4 replacement cable or a functioning Android charging cable from your home.
  • Connect the USB cable to your Dualshock 4 controller.
  • If the light turns blue or green, the controller is charging and the issue was with the cables.

Since USB cables can be fragile, removing one is a simple way to resolve your controllers inability to charge.

Ps4 Controller Blinking Red

A red light in most circumstances is a sign that something is wrong. Are you concerned about the PS4 controllers sudden red light blinking? Are you perplexed as to why your PS4 controller keeps blinking and whether there may be an issue with it?

The red light on the PS4 controller indicates a malfunctioning USB port or a bad charger in general. If that is not the case, it is most likely a hardware issue.

Whatever the case is, we will discuss the top ways to fix the PS4 controller blinking red.

Resetting The Ps4 Console

Another problem that may be causing the red light error is a glitch in your PS4 controller. It can happen when your controller is idle or when you have installed a software update. The best thing to do in this case is to reset your PS4.

You can reset your PS4 by following these steps:

  • Press and hold the power button on your PS4 console for ten seconds.
  • Unplug the power cable from the console.
  • Wait for ten seconds, and then plug it back in.
  • Connect your PS4 controller to the console using the cable and turn it on.
  • This soft PS4 reset may have fixed the red light error.

    Recommended Reading: How To Take Apart A Ps4

    Solution : Reboot Ps4 In The Safe Mode

    If all the methods did not work for you then restart the PS4 console in the Safe Mode to fix the PS4 controller red light blinking issue. Reboot your PS4 console using the safe mode that will help you resolve any firmware issues with your controller and console.

    Follow the below-given instruction to do so:

    • If your PS4 is On, then switch it off.
    • Now press the power button until the Beep sound appears.
    • Then connect the PS4 Controller to the console with the USB cable.
    • Now, Turn On your PS4 console by clicking on the PS button and boot into safe mode.

    When your DS4 controller is on, Then check your PlayStation controller red light issue is resolved permanently.

    After doing so, if you want to get out of the PS4 safe mode loop, then read this complete guide and learn How To Get PS4 Out of Safe Mode.

    Restart Ps4 In Safe Mode

    SONY CUH

    Occasionally, a few bugs may sneak into the system, causing the PS4 controller to flash red. These little problems can be fixed by restarting the PS4 in safe mode. Restarting in Safe Mode will help you fix most of the technical issues with your console.

    Here is how to restart your PS in Safe Mode:

  • Turn off the PlayStation by pressing and holding down the power button for about 30 seconds.
  • Now press the power button for around 10 seconds until you hear two beeps.
  • Connect the DualShock controller of your PS to the console using a USB cable and press the PS button on it.
  • On your TV screen, you will see different options, choose Safe Mode by pressing up or down on the d-pad of your controller.
  • Once your PlayStation starts in Safe Mode, connect it to the internet and see if the problem is solved.
  • Recommended Reading: Is Ps5 Controller Compatible With Ps4

    Take Your Controller For Repairs

    If the issue persists, it means the internal suffered damage. Like Ive said, it could be the battery, the ribbon flex cable, or the USB port.

    These components are hard to find and hard to install. We do not advise opening the controller for repairs unless youre a technician. Also, it could be something else, so your best bet would be to take your DualShock 4 to repair.

    How Do You Fix A Ps4 Controller Red Light Issue

    The red light on PS4 controller could mean many things. It seems nice to know if nothing is wrong thanks to indicators. In this guide, I will explore the whole problem of red light.

    From knowing why it shows up to several solutions on how to repair such kind of problems. Read through and find out the entire solution for a PS4 controller red light issue.

    Read also: Best SSD For PS4

    Recommended Reading: How To Delete An Account From Ps4

    What Are Some Other Ps4 Controller Features

    The Dualshock 4 is the wireless controller of the PS4, and it features a wide variety of improvements over previous models.

    It has a better motion sensor, a brightly colored light bar, and built-in speakers for a more immersive experience.

    The controller also has an excellent battery life that can last up to five hours when fully charged.

    However, these controllers are not everlasting and you may notice malfunctions after about the 7th year of use.

    Can I Change The Color Of The Ps4 Controllers Light Bar

    How to fix your ps4 controller disconnecting wirelessly, discharging fast or the blinking red light

    There is no option to change the light bar color on your PS4 controller, but you can switch the user to change the color. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. You can create different user profiles and then switch to other user without logging out of your account.

    To switch user, press and hold the PS button of the controller, highlight Power and select Switch User, now choose a user and check what color you get you can switch the users multiple times until you find the color you want.

    Don’t Miss: Is Fortnite Cross Platform Xbox And Ps4

    As A Final Note On Why Ps4 Controller Red Light Is Showing

    Certainly, you should be worried about your PS4 controller, especially if it has started flashing red lights, which is usually a bad sign. We have done our best to reduce your confusion over the red light on your controller in this article. Hopefully, the guidelines in this article were helpful to you.

    What To Do When The Ps4 Controller Flashes Red

    If your DualShock controllerflashes red but continues to operate normally, it does not require any manipulation on your part. We still recommend that you save your game data as soon as possible.

    If you notice that your controller flashes red and it bugs or does not work properly, then carry out checks and manipulations following steps to try to solve the problem.

    Also Check: How To Zoom Out On Ps4

    Using The Wireless Controller

    Press the PS button on the controller, and then select a user.

    • The first time you use a controller, you’ll need to pair it with your PS4 system.
    • Up to four controllers can be used at the same time. When you press the PS button, the light bar will glow in a uniquely assigned color. The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

    Other Ps4 Controller Light Colors

    Crimson Red Camo by ProFlex®

    The most common colors are as mentioned below:

    • Blue Default color for the light bar and indicates player one.
    • Red Indicates player 2, and some games use it to denote damage or low health.
    • Green Indicates player 3, and some games use it to denote full health.
    • Pink Indicates player 4, and some games use it to denote other instances.

    Other colors that can appear in games include teal, purple, orange, yellow, and white.

    The Dualshock 4 controller actually supports any color on the RGB spectrum however, not all of them are available for use on the PS4.

    Since the usage of the light bar is up to the developer of the games, there is no system-wide method to change the light color whenever you want.

    However, in some online or multiplayer games, players can choose the color of from a select palette of colors.

    Also Check: How To Mod Borderlands 2 Ps4 Without Ps3

    How To Turn Off Ps4 Controller Light

    Similar to changing the color on the Dualshock 4, switching off the light is impossible unless the game you are playing does not utilize the light bar.

    This could be because the light bar on the controllers acts in a similar way to the Playstation Move controllers that were released on the PS3.

    Its what the Playstation camera uses to measure the depth and distance of the player from the camera.

    What Is A Ps4 Controller

    A PlayStation 4 controller is a video game controller designed by Sony Interactive Entertainment for use with the PS4 home video game console.

    The DualShock 4, the controller for the PlayStation 4, was announced at Gamescom in Cologne, Germany, on August 20, 2013.

    Formerly codenamed Project Morpheus, it features a touchpad that supports optional touch input and a Share button to upload gameplay videos and screenshots to social networks.

    It also supports motion sensing via its three-axis gyroscope and a three-axis accelerometer. The PS4 controller is a state-of-the-art piece of hardware that delivers a fantastic gaming experience.

    The controller has many features that are designed to give gamers an edge over their competition.

    Most people have heard of it, but not many know what it is or how it works. Thats because its a pretty complex piece of technology that has a lot going on inside.

    The PS4 controller had seen a few upgrades since the original PS1 release back in 1994, and each advancement has made some dramatic changes to everything from button placement to face buttons.

    The controller can also be used with a PC via Bluetooth and is an excellent way to play your favorite games.

    Don’t Miss: How To Clip Things On Ps4

    Why Is My Ps4 Controller Red Light Showing Simple Way To Fix It

    In most situations, a red light represents a warning that something is amiss. Should you be concerned about the sudden appearance of the PS4 controller red light? Its common to encounter a PS4 controller red light, and PS4 console gamers frequently look for solutions. The purpose of this guide is to show you how to correct the ps4 controller red light on your PS4 controller and the possible causes.

    Page Contents

    Solution : Reset The Dualshock Controller

    PS4 Controller Light Bar Colour Meaning

    After restarting the PS4 Console, if your PS4 controller shows red light then you can reset the DualShock Controller to fix this problem.

    Follow the Steps to Reset the DualShock Controller:

    • On the backside of the controller, you will see a small restart button beside the L2 button.
    • To click the tiny button you need a thin needle, with the help of the needle press the reset button.
    • Now with the help of a USB cable connect DualShock 4 Controller and PlayStation 4 Controller together.
    • Turn on the PS4 console by clicking on the PS Button

    And check if the PS4 Dualshock red light issue has been permanently fixed or head to the next solution.

    You May Like: When Is The Ps4 Pro Coming Out

    How To Change Ps4 Controller Light

    When you turn on your PS4, your controller will light up blue by default. If you are the 2nd, 3rd, or 4th player, then your light bar will be red, green, or pink, respectively.

    Sadly there is no way to change your PS4 controller at will while using it on a PS4.

    If the game you are playing uses a different color from the default blue, then it will change otherwise, it will remain blue for player 1.

    Ps4 Controller Red Light Bar During Gameplay

    In some games, the light bar on the controller turns red to indicate your in-game characters health, and if you play NFS as the illegal street racer, the light bar will turn red. Some games also turn the lightbar red when you die in a Killzone, so its not something to worry about.

    If you are the only player and the controller still shows red light, it could mean you are logged in as another user changing the user will also change the light. To switch user, press and hold the PS button of the controller, highlight Power and select Switch User, now you can choose the user you want to play with.

    Don’t Miss: How To Connect Ps4 Controller To Pc

    Ps4 Controller Light Colors Change:

    • Yellow Light yellow light has been shown when your PS4 is in charging mode.
    • Blinking Orange Light indicates the rest mode. In rest mode, the PS4 can download, download the content, and charge the controller. .
    • Blue Light indicates the initiation of connectivity. After few seconds, you will see the PlayStation® logo on the screen.
    • The White Light represents the correct working of the system when it is on.
    • The Red Light shows the system is not working fine and overheating.

    While during games, it means:

    • Blue for Player One
    • Green for Player Three, and
    • Pink for Player Four

    Run the game GTA V and observe the colors of your PS4 controller. You will see that the light turns Green for Franklin Clinton, Blue for Michail De Santa, and Yellow for Trevor Philips. In a police chase, the light bar flashes Red and Blue.

    Why Is My Ps4 Controller Red A Detailed Explanation

    MAGMA RED PS4 CUSTOM MODDED CONTROLLER

    The PlayStation 4 Controller has a new color, and the Internet is freaking out. Why? Well, this is a controller that was first revealed to the world in 2010, back when it was going by the codename The Super Bowl.

    The controller that comes with all versions of the original PlayStation 4 is colored red. Its not just brown or black its red. And it isnt just any old red either its a deep crimson shade known as Jet Black.

    If you are a product design enthusiast, there is no doubt that you have noticed the strange color of your PlayStation 4 controller.

    So why is the PS4 controller red? This article aims to explain that reason in great detail.

    Why Is My PS4 Controller Red?

    The DualShock 4 controller is red because Sony wanted to make the controller stand out among other consoles. The company wanted its users to feel that they were using a high-end device, so it went with the color red.

    Another reason for the controllers color is due to Sony being unable to create a blue LED light on an LCD screen.

    Recommended Reading: When Will Playstation 5 Be Available

    Check That Your Controller Is Working

    As a first step and if you have the possibility, test the functionality of your controller. To do this, try your controller on another PS4 or test another working controller on your PS4.

    If the other controller works, it is very likely that your controller is faulty due to an internal broken component. If your controller connects to another PS4, in this case, it is very likely that there is a connectivity issue between your controller and your console. In both cases, perform the following operations to try to get it to work again.

    Change Your Ps4 Controllers Ribbon Cable

    A defective ribbon cable can also show a red light in your PS4 Controller. It just meant there might be a hardware malfunction. If a ribbon cable is tampered with or damaged then it fails to charge a battery.

    It causes the gaming player to encounter a bad battery. To overcome this problem you need to replace the ribbon cable. Problems usually occur because of a faulty ribbon cable or damaged wires.

    Don’t Miss: Where Is L3 On Playstation 4 Controller

    Solution : Change Ps4 Controller Ribbon Flex Cable

    Aside from the solution above, if you use a faulty or damaged ribbon cable, it can cause this PlayStation 4 controller red light wont turn off the problem. It may be due to a hardware issue.

    If your ribbon cable is damaged, you will unable to charge the PS4 console battery and as a result, the PS4 controller wont charge. And you will not be able to play because of the low battery of your PS4 game console.

    To fix this issue you can use the below-given methods:

    • First, remove the PS4 back cover and the Ribbon flex Cable, Clean the Cable with Alcohol and fix it back and now try charging the battery.
    • After cleaning if you are still unable to charge your PS4. Then it is recommended to purchase a new PS4 Ribbon Cable.

    Reset Your Ps4 Console

    How To Fix PS4 Controller Not Charging! (2020)

    If resetting your PS4 controller still didnt work, then its time to reset your console.

    To reset your PS4 console, you can follow these steps:

    • Hold the power button for 10 seconds.
    • Unplug the power cord from the console.
    • Wait a few seconds before replugging the power cord.
    • Turn on the console.
    • Connect your controller and the charging cable.
    • Turn on the controller by pressing the PS button.

    Don’t Miss: Where To Get The Ps5

    Why Is The Ps4 Controllers Red Light On 5 Fixes

    The Playstation 4 is one of Sonys most popular consoles so far. However, as great as the console was, its been nine years since it launched, and the longer youve had it, the chances are things are starting to break.

    In this article, were taking a look at the PS4 controllers light colours, more specifically, why is it red and how you can fix any problems that might be hampering your controller.

    How To Fix Ps4 Controller Light Is Red

    The PS4 controller has a light bar showcasing its functional state. If its working normally, it shines with white light. But Im guessing this is not the case for you, so youre wondering why your PS4 controller light is red.

    The red light on a PS4 controller is often a sign of physical damage. It means broken hardware, and its typically the USB port on the back of the peripheral.

    However, a random bug or a normal function may also be causing the issue. For example, if your DualSence was working fine until you suddenly saw a red light, its not something to worry about.

    But if it has been stuck like that for a while, and it doesnt work or sync to the PS4, you may need some troubleshooting.

    Read Also: How To Uninstall Games On Ps4

    More articles

    Popular Articles