Wednesday, June 12, 2024

How To Use A Ps4 Controller On Pc

Don't Miss

Can You Play Overwatch On Pc With A Switch Pro Controller

How to Use PS4 Controller On PC (Windows 10)

Using the USB cable, attach the controller to your PC. After about a few seconds, your PC will recognize it as a Pro Controller. In the first instance, once your Pro Controller has been connected, you will see it detect it, and you will then be asked whether you wish to go into the settings further. If everything is set up correctly, proceed through this process.

How To Pair Your Playstation 4 Controller With A Wired Connection

Connecting the DS4 to your PC with a USB-A to Micro-USB cable is by far the easiest way to start gaming with the PS4’s pointer. Just plug it into your PC and let the drivers install themselves.

Hitting the PS button in the middle of the controller at this point won’t do anything unless you have Steam installed and running. If so, you’ll notice that Big Picture mode launches when you hit the button. At this point, you can make some tweaks inside Steam.

How To Connect A Ps4 Dualshock 4 Controller To A Pc

The PlayStation 4’s DualShock 4 controller is a fantastic gamepad, and with some tinkering you can get it to work with your PC.

The DualShock 4 is a great controller, but it’s designed specifically for the Sony PlayStation 4. That means, at least on paper, that it’s not meant to be used with PC games. Fear not, since PCs are such powerful and flexible systems, you can get nearly any peripheral to work on them with a little effort. Here’s how to connect a DualShock 4 controller to your PC.

Read Also: How To Grab Ips On Ps4

How To Emulate An Xbox Controller With A Ps4 Controller

RELATED:Why You Should Get an Xbox Controller for PC Gaming

Xbox 360 controllersand Xbox One controllers, now that Microsoft has finally released the necessary driversare usually best for PC gaming. Many PC games are designed specifically to work with Xbox controllers. Many games also require xinput input, which Xbox controllers provide, but other types of controllers dont.

If youre using a a PS4 controller with an emulator to play older games, you could easily configure the emulator to accept the controllers button presses. If youre using it with a PC game, you may need to open the PC games control-settings and configure the game to respond to the controllers inputs.

But for games that expect an Xbox controller, you may have to emulate xinput. This will convert the PS4 controllers input to the equivalent Xbox button presses, and games will just work with the DualShock 4 just like they would with an Xbox controller. Theyll just think youre just using an Xbox controller.

Sony hasnt released any official drivers for the PlayStation 4 controller on a PC, so theres no official way to do this. There are tools for emulating xinput with a PS4, but theyre unofficial, third-party tools developed by the community.

We recommend the free Input Mapper program. This tool will also helpfully show the battery level of your controller, which is something you wont normally be able to see in Windows.

Download And Install Inputmapper Software

How To Use A PS4 Controller On PC! " Easy Tutorial"

Another third-party solution that can help you use PS4 controller on a Windows 10 PC is InputMapper. To configure your controller using InputMapper follow these steps:

  • Download InputMapper from here.
  • Install InputMapper and connect your PS4 controller using USB cable or by using Bluetooth. To pair your Windows 10 PC with PS4 controller via Bluetooth, turn on Bluetooth on your PC and hold PS and Share buttons on the controller.
  • Now Open InputMapper and your controller should be recognized and ready to use.
  • We have to point out that certain games might have a few issues, so youll have to tweak a few settings in InputMapper in order to fix those issues.

    Connecting PlayStation 4 controller to Windows 10 PC isnt that hard, and if you want to connect your PS4 controller to your PC be sure to try some of our solutions.

    If you have any questions about connecting your PlayStation controller to a Windows 10 PC, sound off in the comments section below!

    Also Check: Ps4 Running Hot

    How To Connect Ps4 Controller To Pc

    Simon Sayers / November 12, 2021

    How To Connect PS4 Controller To PC, How To Pair PS4 Controller To PC Connecting a PS4 controller To A PC used to be a long and arduous task once upon a time, but now hooking up a DualShock 4 to your gaming set-up has never been simpler, and now that PlayStation Now is about to host some of the best PS4 exclusives its time you should work out how to do it. Follow this guide to discover how to connect PS4 controller to PC.

    Rather than having to download drivers nowadays, the software for connecting your PS4 peripheral to your PC will automatically be detected. Use the micro-USB cable that comes with the PS4 and simply plug it into your PC USB port. Wait 30 seconds or so for the drivers to install and your PS4 controller is connected, and youre ready to play games.

    How To Wireless Connect A Ps4 Controller To Steam

    If you hold down the PS and buttons simultaneously on your controller, your PC might automatically detect it via Bluetooth. If it doesn’t, you might need a PS4 DualShock 4 wireless dongle to play wirelessly. Official ones can be purchased from Sony, or you can find one made by another manufacturer.

    To wirelessly pair the PS4 controller with Steam:

  • Launch Steam.

  • Plug the PS4 Bluetooth dongle into your computer’s USB port.

  • Simultaneously hold the PS and buttons on the controller until the light on top starts flashing.

  • When the controller appears in the device list, press the X button on the controller to activate it.

  • Press the button on the end of the dongle. It should also start flashing.

  • You May Like: Gta 5 Ps4 Install

    How To Connect Ps4 Controller To Pc Wirelessly

    If youre looking for a wireless solution, then Sony has you covered with the DualShock wireless adaptor for PC. This launched in September 2016 and is available from various online retailers, including Amazon. Simply:

    • Plug the adapter into your PC USB port and wait for drivers to install
    • Hold down the Share and PS buttons at the same time on your DualShock 4
    • This will pair both devices and you should now be able to use your PS4 controller on PC

    Note: You are not restricted to just using a Sony controller on PC. Some third-party controllers that also utilize the XInput API will also work, but its worth investigating it thoroughly online before buying a controller that doesnt work!

    How To Play Non

    How To Use A PS4 Controller On A PC – Wired / Wireless

    To play non-Steam games on a Windows PC, you’ll need a special device driver. The DSWindows driver works by tricking the computer into thinking the PS4’s DualShock controller is an Xbox controller.

  • Unplug any nearby PlayStation 4 consoles to avoid syncing interference.

  • Plug the PS4 controller into a USB port on the PC.

  • Open a web browser, go to, and select . This takes you to GitHub with a listing of the latest drivers.

  • Select to download it.

  • Open the zip file and move the files from the zip file to your PC.

  • Open the DS4Windows.exe file.

    If nothing happens when you select the file, restart your computer and open it again.

  • Select Appdata in the pop-up window.

    If prompted to give DSWindows.exe permission to make changes to your computer, select Yes.

  • The driver installs automatically, and the controller is ready to use. A menu opens where you can adjust the PS4 controller settings. Open DS4Windows.exe any time to access this menu.

    On Windows 7 or an earlier version, you’re prompted to install support for Xbox 360 controllers.

  • If you experience any problems, reboot the computer. Sometimes this may be needed for Windows to detect the driver and the controller properly.

    Recommended Reading: How To Text In Minecraft Ps4

    Use Ps4 Controller With Pc Via Bluetooth

    Sonys PlayStation 4 controller is wireless. To keep cables out of the way, the controller can be connected to a PC via the built-in Bluetooth function.

    • Bluetooth must be activated on the computer so that the connection between the PC and the hardware can be established.
    • To do this, first open the Settings and select Devices there. The Bluetooth function appears at the top of the menu and is activated by clicking on it.
    • In the next step, select Add Bluetooth or other device and click on the first item Bluetooth .
    • The PC will now search for Bluetooth devices close by. The PS4 controller must also be activated so that it can be connected to the PC. This is called pairing mode.
    • To activate this mode, press and hold the PS button and the Share button at the same time.
    • The PC will recognize the controller as a wireless controller, which you finish by clicking on the selection . From this point on, the computer is connected to the PS4 device.

    Even with this connection method, some games require a of the controller. Next, well show how to customize the PS4 controller and change the button assignment for a game.

    We explain how to use a PS5 controller on PC in an extra article.

    Add Epic Games Launcher To Steam

    If you add Epic Games Launcher to Steam and run it through that, every game in your Epic Games library can make use of Steam Input. This is a pretty simple process, and you can do it by following the steps below.

    • Launch Steam, and click on Games at the top left
    • Select Add a Non-Steam Game to My Library
    • After clicking this, a list of programs will show up.
    • Here, you want to check Epic Games Launcher, and then click Add Selected Programs
    • This will add Epic Games Launcher to your Steam library
    • Now, click on Steam at the top left
    • Select Settings
    • Now, select the Controller tab
    • After this, select GENERAL CONTROLLER SETTINGS
    • Now, make sure PlayStation Configuration Support is checked
    • Now, launch Epic Games Store
    • Now, launch Salt and Sacrifice as you normally would in Epic Games Launcher, and youll notice how you can access Steam Overlay as well.
    • You can now play with your Dual Shock 4 controller since youve enabled Steam Input

    You can use other controllers like the Switch Pro controller as well, and all you need to do is follow the same steps above, and check the Switch Pro Configuration Support.

    This is all you need to do and all your Epic Games library will have Steam Input support as well. We hope that the developers add native Dualshock 4 support in some updates, but for now, this is the easiest way to add support manually.

    We hope this guide helped you play with Salt and Sacrifice with PS4 Controller. Let us know if you have any questions in the comments below.

    • Tags

    Don’t Miss: How To Sign In To Playstation Network For Ps4

    Quirks And Game Support

    Now for the “bad” news. Using a DualShock 4 on your computer can be a bit tricky at times. A lot of it depends on your system setup and what you are trying to do with the controller.

    Windows users relying on DS4Windows should be good to go as long as the game you are playing has controller support. DS4Windows transforms the signals from the DS4 into Xbox 360 code, so it’s effectively remapped across the OS.

    We also tested the DualShock 4 with Steam on PC, and it works great in “Big Screen” mode after a bit of tinkering. After starting the Steam launcher in Big Screen mode, you want to click on the Settings icon . Click the Controller Settings tab and check the “PlayStation Configuration Support” box.

    Using the DualShock 4 with PlayStation’s Remote Play app is relatively painless since the apps for both PC and Mac have built-in support. However, if you are running a version of macOS earlier than Catalina 10.15, you will need Sony’s DS4 Bluetooth dongle. This is unfortunate because the officially supported adapter goes for about $65 on , although you can find them for less on eBay.

    Some Redditors have reported that you can use any Bluetooth adapter, and this may be true, but we have not tested to confirm this. We have tested the official dongle, and it solves Remote Play compatibility issues on older iterations of macOS.

    Further Reading

    Option : Connect Using Ds4windows

    How to use a PS4 controller on PC

    This solution requires a bit of set up, but its still the best way to get your PC and DualShock 4 controllers talking without any major headaches. You can connect your DualShock 4 controller to your PC using DS4Windows, a third-party application, in either wired or wireless mode . Unless you buy the adapter, this is the best option if you plan to play games through Origin, UPlay, GoG, or other PC gaming portals.

    DS4Windows essentially tricks your system into believing its using an Xbox 360 controller, but youll still have access to motion controls and even the touchpad for many games.

    Step 1: Download the latest version of DS4Windows, which can be found on the applications official website.

    Step 2: Extract it using an archive manager such as WinRAR or 7Zip. You will then have two files, DS4Windows and DS4Update.

    Step 3: Double-click DS4Windows to run the installer, which will prompt the following dialogue box:

    Step 4: Follow the on-screen instructions, beginning with driver installation. The installation is quick, so you wont have to wait long. Click on Install 360 Driver if youre running Windows 7 or older the driver comes preloaded on Windows 8 and 10 machines.

    Step 6: Hold the PS Button on your DualShock 4 for three seconds, or until the light bar begins to flash.

    Step 7: Open the Bluetooth settings on your PC.

    Step 8: Connect to Wireless Controller.

    Step 9: If prompted to input a pairing code, enter 0000.

    Step 10: Click Finish on the DS4Windows installer.

    Don’t Miss: How To Sign In To Playstation Network

    How To Use A Ps4 Controller With A Pc

    Bypublished 14 December 17

    Connecting a PS4 controller to a PC is easy, but unless you want to invest in a third-party adapter, you’re better off with a PC controller.

    In the olden days , connecting a PS4 controller to a PC was a harrowing process, with unpredictable results. Now, PC gamers can use the DualShock 4 with relative impunity, thanks to better software, better hardware and better Steam integration.

    Still, plugging in a DS4 is not quite as simple as using an Xbox 360 or Xbox One controller, so if youd like to bring a PS4 peripheral to a PC party, heres what you need to know.

    Getting The Gamepad To Work

    Connecting the controller is only the start of the process, due to how the DualShock 4 communicates with your PC. Most current Windows games use Microsoft’s XInput, an interface that processes Xbox 360 and Xbox One controller inputs. The DualShock 4 doesn’t send XInput commands, so a wrapper is needed to translate its inputs into something your PC can deal with easier. There are two good options: DS4Windows and Steam’s controller compatibility settings.

    Read Also: What Year Did Playstation Come Out

    Ds4 For Windows: How To Configure A Ps4 Controller

    Unlike controllers from the Xbox series, which are tailored for use with Windows, some games do not recognize the PS4 controller on PC. In other cases, the pre-set assignment of the buttons is not ideal, so they might need to be adjusted. In both cases, programs like DS4 Controller help to recognize a PlayStation controller and assign buttons individually.

    This software converts controllers so that they are considered Xbox controllers for Windows. This is necessary because Windows uses the Xinput interface to link controllers to a computer. The Xinput interface is limited to linking Xbox components to Windows, both of which are made by Microsoft.

    With the use of programs like DS4 for Windows, it is suggested to the PC that the connected controller is an Xbox controller. It does not matter whether you connected the PS4 controller to the PC via USB or Bluetooth.

    If you are using Windows 7, the appropriate driver must be downloaded beforehand Windows 8.1 and higher have the driver pre-installed.

    When you start the program, it should directly find and display the controller previously connected via USB or Bluetooth. In the menu of DS4Windows you can see in the Controller area under ID whether the controller has been connected and recognized. The individual assignment of the buttons you make in the menu item Profile. The DS4 controller shows the translation of the PS4 buttons to a virtual Xbox controller there .

    Pair Ps4 Controller To Windows

    How to Use A PS4 Controller on PC: Wired and Wirelessly 2021!

    First, well pair and connect the DS4 controller to the Windows computer. Go to Settings by clicking the Settings button on the bottom left corner in the Start menu.

    Also Read: How to Connect and Map PS4 Controller to Android TV?

    to open the Devices settings, here we can manage all the devices and add the DS4 controller via Bluetooth.

    your computer would start looking for Bluetooth devices ready for pairing. Now would be a good time to put your DS4 controller in the pairing mode.Press and hold the PS + SHARE button simultaneously. When the light on the controller starts pulsing white, it means the controller is in pairing mode.

    Read: How to connect AirPods to PS4

    It would show up on the list on your computer. to begin the pairing process.

    The light on your controller would turn to a solid color and stop pulsing or blinking. It means your controller is paired and you can use it with supported applications but if you try to use the touchpad, it does nothing.

    Must Read: How to Play PS4 on the Laptop Without Remote Play

    You May Like: Free Ps4 Backup Codes

    More articles

    Popular Articles